Operation Manual

16 USING THE PHONE

3.2.3 Paired devices

The cellular(s) paired up will be displayed in the paired devices list, no matter whether it(they)

is(are) connected or not. You can choose to connect, or remove the cellular from this menu.

1. Press MENU and then VOL+ or REDIAL/VOL- to select

BLUETOOTH

2. Press MENU and then VOL+ or REDIAL/VOL- to select

PAIRED LIST

3. Press MENU and then display will show the Cellular name(s) of paired device(s).

NOTE

Display will show

NO PAIRED DEVICE

if there is no device paired up.

4. Press VOL+ or REDIAL/VOL- to select the desired cellular device.

For the connected cellular device:

5. Press MENU to remove the cellular device. Display will show

REMOVE THE CELLULAR?

6. Press MENU to confirm.

For the cellular device that is not connected:

5 Press MENU and then VOL+ or REDIAL/VOL- to select

CONNECT

REMOVE CELLULAR

6 Press MENU to confirm. If you select

REMOVE CELLULAR

, press MENU again to confirm.

NOTE

• When the connected cellular is removed, the corresponding or will be off.

• When the disconnected cellular is connected, the corresponding or will be on.

• When the cellular is removed, the device name will be removed and

EMPTY

will be

displayed instead in the paired devices list.

3.3 Making a home call using your landline

1. Enter the phone number and press /HOME or /SPEAKER to dial the phone

number.

3.4 Making a cellular call using your cordless DECT handset

If there is only one Bluetooth enabled mobile phone paired up and connected,

1. Enter the phone number, and then press /CELL to dial out.

If there are two Bluetooth enabled mobile phones paired up and connected,

1. Enter the phone number, press /CELL and then VOL+ or REDIAL/VOL- to select

the desired cellular device.

2. Press MENU or /CELL to dial out.

NOTE

If the cellular device is paired up but not connected, you should connect the cellular device

before making an external cellular call.