Operation Manual

22 USING THE PHONE
1. Press MENU.
2. Press VOL+ or REDIAL/VOL- to scroll through the menu.
3. Press MENU to open sub-menus and/or save settings.
4. Press /MUTE to go back to previous menu level or cancel an action.
If you do not press any button on the handset for 30 seconds, the display will automatically
return to standby. It will also return to standby when the handset is placed on the base or
charger.
3.21 Intercom
This feature is only available when there are at least two registered handsets. It allows you to
make internal calls, transfer external home calls from one handset, and use the conference
option.
NOTE
Cellular call cannot be transferred.
3.21.1 Calling another handset
1. Press MENU and then VOL+ or REDIAL/VOL- to select
INTERCOM .
2. Press MENU and then VOL+ or REDIAL/VOL- to select the handset you want to call.
3. Press MENU to call the handset
4. Press /HOME to hang up.
NOTE
If the handset is not within the valid operation range, this function may not be available.
During an intercom call, you will hear an alert tone if there is an incoming external call. You
need to press /HOME to hang up the intercom call before answering the incoming
external call.
3.21.2 Transferring an external home call to another handset
1. During an external home call, press MENU. Your call will be put on hold.
2. Press VOL+ or REDIAL/VOL- to select the handset you want to call.
3. Press MENU to call the handset.
4. When the other handset answers by pressing /HOME or /SPEAKER, press /
HOME on the calling handset to transfer the call. If the other handset does not answer,
press /MUTE to talk to your caller again.
3.21.3 Three-party conference call
1. During an external home call, press MENU. Your call will be put on hold.
2. Press VOL+ or REDIAL/VOL- to select the handset you want to call.
3. Press MENU to call the handset.