Operation Manual

26 USING THE PHONE
3.28.5 Announcement
This is the message your callers hear on the answering machine. There are two pre-
recorded outgoing messages, or you can record your own message.
Recording the announcement
1. Press MENU and then VOL+ or REDIAL/VOL- to select
ANSWER MACHINE .
2. Press MENU and then VOL+ or REDIAL/VOL- to select
ANNOUNCEMENT .
3. Press MENU to select
RECORD .
4. Press MENU and then VOL+ or REDIAL/VOL- to select the answer mode
ANNC & RECORD
or ANNOUNCE ONLY
.
5. Press MENU to start recording after the beep.
6. Press MENU again to stop recording and save the message. The just saved message is
played automatically.
NOTE
When playing the recorded message, press /MUTE to delete it and the pre-recorded
message will be set automatically.
3.28.5.1 Playing the announcement
1. Press MENU and then VOL+ or REDIAL/VOL- to select ANSWER MACHINE .
2. Press MENU and then VOL+ or REDIAL/VOL- to select
ANNOUNCEMENT .
3. Press MENU and then VOL+ or REDIAL/VOL- to select
PLAY .
4. Press MENU and then VOL+ or REDIAL/VOL- to select the answer mode
ANNC & RECORD
or
ANNOUNCE ONLY .
5. Press MENU and the message will be played.
3.28.6 Recording a memo
You can record a memo which is stored in your answering machine and played back like a
normal message.
1. Press MENU and then VOL+ or REDIAL/VOL- to select
ANSWER MACHINE .
2. Press MENU and then VOL+ or REDIAL/VOL- to select
RECORD MEMO .
3. Press MENU to start recording.
4. Press MENU again to stop recording and save the message. The just saved message is
played automatically.
NOTE
When playing the message, press /MUTE to delete it.
3.28.7 Call screening on/off
Call screening allows you to hear the message being recorded, and if you want, you may
interrupt the message recording and take the call.