User manual

37
main attractions
Your phone displays a list of device(s) located
within range of the phone. If your phone is
already connected to a device, your phone
lists that device and identifies it with a
\ (in-
use indicator). Once a connection is
established with a device, no other device can
connect to your phone until the currently
connected device is disconnected.
1 Highlight a device in the list of devices
your phone found.
2 Press the center key s to connect the
device.
3 If the device requests permission to bond
with your phone, select
YES and enter the
device PIN code to create a secure
connection with the device.
Note: The default PIN code is 0000.
When the connection is made, the
à
(Bluetooth) indicator or a
Bluetooth message
displays in the home screen.
Tip: For specific information about an
accessory, refer to the instructions that came
with it.
TTY operation
You can use an optional TTY device
with your phone to send and receive calls. You
must plug the TTY device into the phone’s
headset jack and set the phone to operate in
one of three TTY modes.
Note: Use a TSB-121 compliant cable
(provided by the TTY manufacturer) to
connect the TTY device to your phone.
Note: Set the phone to level 4 (middle setting)
for proper operation. If you experience a high
number of incorrect characters, adjust the
volume as needed to minimize the error rate.
Note: For optimal performance, your phone
should be at least 12 inches (30 centimeters)
from the TTY device. Placing the phone too