user manual

Debugger General Information
B-56
B
MMD Memory Map Diagnostic MMD RANGE DEL increment[;B|W|L]
MS Memory Set MS ADDR {Hexadecimal number} {'string'}
MW Memory Write MW ADDR DATA [;B|W|L]
NAB Automatic Network Boot
Operating System
NAB
NBH Network Boot Operating
System and Halt
NBH [Controller LUN][Device LUN][Client IP
Address]
[Server IP Address][String]
NBO Network Boot Operating
System
NBO [Controller LUN][Device LUN][Client IP
Address]
[Server IP Address][String]
NIOC Network I/O Control NIOC
NIOP Network I/O Physical NIOP
NIOT Network I/O Teach NIOT [;[H]|[A]]
NPING Network Ping NPING Controller-LUN Device-LUN Source-IP
Destination-IP [N-Packets]
OF Offset Registers
Display/Modify
OF [ Rn[;A] ]
PA Printer Attach PA [n]
NOPA Printer Detach NOPA [n]
PF Port Format PF [PORT]
NOPF Port Detach NOPF [PORT]
PFLASH Load FLASH Memory PFLASH SSADDR SEADDR DSADDR
[IEADDR] [; [A|R] [X]]
PFLASH SSADDR SEADDR DSADDR
[IEADDR] [;[B|W|L] [A|R] [X]]
PS Put RTC Into Power Save
Mode for Storage
PS
RB ROMboot Enable RB[;V]
NORB ROMboot Disable NORB
RD Register Display RD {[+|-|=][DNAME][/]} {[+|-|=][REG1[-
REG2]][/]} [;E]
Table B-4. Debugger Commands (Continued)
Command
Mnemonic Title
Command Line
Syntax