user manual

Configure and Environment Commands
D-12
D
Slave Ending Address #2 FFE1FFFF Ending address of the local resource
that is accessible by the VMEbus.
Default is the end of static RAM,
$FFE1FFFF.
Slave Address Translation Address
#2
00000000 Works the same as Slave Address
Translation Address #1. Default is 0.
Slave Address Translation Select #2 00000000 Works the same as Slave Address
Translation Select #1. Default is 0.
Slave Control #2 01EF DeÞnes the access restriction for the
address space deÞned with this slave
address decoder. Default is $01EF.
Master Enable #1 [Y/N] Y Yes, set up and enable the Master
Address Decoder #1.
Master Starting Address #1 02000000 Base address of the VMEbus resource
that is accessible from the local bus.
Default is the end of calculated local
memory.
Master Ending Address #1 EFFFFFFF Ending address of the VMEbus
resource that is accessible from the local
bus. Default is the end of calculated
memory.
Master Control #1 0D DeÞnes the access characteristics for the
address space deÞned with this master
address decoder. Default is $0D.
Master Enable #2 [Y/N] N Do not set up and enable the Master
Address Decoder #2.
Master Starting Address #2 00000000 Base address of the VMEbus resource
that is accessible from the local bus.
Default is $00000000.
Master Ending Address #2 00000000 Ending address of the VMEbus
resource that is accessible from the local
bus. Default is $00000000.
Master Control #2 00 DeÞnes the access characteristics for the
address space deÞned with this master
address decoder. Default is $00.
Table D-1. ENV Command Parameters (Continued)
ENV Parameter and Options Default Meaning of Default