user manual

Set Environment to Bug/Operating System
D-13
D
Master Enable #3 [Y/N] N Do not set up and enable the Master
Address Decoder #3.
Master Starting Address #3 00000000 Base address of the VMEbus resource
that is accessible from the local bus.
Default is $0.
Master Ending Address #3 00000000 Ending address of the VMEbus
resource that is accessible from the local
bus. Default is $0.
Master Control #3 00 DeÞnes the access characteristics for the
address space deÞned with this master
address decoder. Default is $0.
Master Enable #4 [Y/N] N Do not set up and enable the Master
Address Decoder #4.
Master Starting Address #4 00000000 Base address of the VMEbus resource
that is accessible from the local bus.
Default is $0.
Master Ending Address #4 00000000 Ending address of the VMEbus
resource that is accessible from the local
bus. Default is $0.
Master Address Translation
Address #4
00000000 This register will allow the VMEbus
address and the local address to be
different. The value in this register is
the base address of VMEbus resource
that is associated with the starting and
ending address selection from the
previous questions. Default is 0.
Master Address Translation Select
#4
00000000 This register deÞnes which bits of the
address are signiÞcant. A logical one "1"
indicates signiÞcant address bits,
logical zero "0" is non-signiÞcant.
Default is 0.
Master Control #4 00 DeÞnes the access characteristics for the
address space deÞned with this master
address decoder. Default is $00.
Short I/O (VMEbus A16) Enable
[Y/N]
Y Yes, enable the Short I/O Address
Decoder.
Table D-1. ENV Command Parameters (Continued)
ENV Parameter and Options Default Meaning of Default