Specifications

Locomotive decoders 30s series English
Page 21
Connecting a smoothing capacitor
In track sections with bad contacts the power supply may be
interrupted shortly. With those locomotive decoders with enough space
on the PCB (LD-G-32, LD-G-33, LD-G-34, LD-W-32, LD-W-33) you can
solder an additional capacitor to counteract this effect (see connection
diagram of the particular decoder).
Fixing the locomotive decoder
After completing all connections fix the locomotive decoder with double-
sided adhesive tape, for example.
Decoder factory settings
Decoder type Front lighting Back lighting Accessory switched via F1 Accessory switched via F2 switched via F3 switched via F4 Accessory switched via F5 Accessory switched via F6
LD-G-30 AUX1 AUX2 --- --- --- ---
LD-G-31 AUX1
(X7)
AUX2
(X8)
AUX3
(X3)
AUX4
(X6)
signal horn
low (X1)
signal horn
high (X2)
LD-G-32 AUX1 AUX2 --- --- --- ---
LD-G-33 AUX1 AUX2 AUX3 AUX4 AUX5 AUX6
LD-G-34 AUX1 AUX2 AUX3 AUX4 AUX5 AUX6
LD-W-32 AUX1 AUX2 --- --- --- ---
LD-W-33 AUX1 AUX2 AUX3 AUX4
Shunting gear on / off
Acceleration and braking
declay on / off
AUX5 AUX6
If you want to use the decoder factory settings, you have to connect
the lighting and the accessories according to the details in the list.