Specifications

Locomotive decoders 30s series English
Page 35
Name of CVs /
Registers
CV-
no.
Reg.
no.
Input value
(Default)
Remarks and Tips
Dimming of the outputs:
AUX1, AUX2 62 35 1...255 (255)
LD-G-31, LD-G-33, LD-G-34, LD-W-33 only:
AUX3, AUX4 63 36 1...255 (255)
LD-G-33, LD-G-34, LD-W-33 only:
AUX5, AUX6 64 37 1...255 (255)
= Reduction of the voltage
applied to the output. The
value "1" corresponds to the
lowest, "15" to the maximum
voltage.
It is possible to choose a value between 0 and 15 for any of the outputs. For the
outputs with an odd number the value is set directly, for the outputs with an
even number the input value has to be multiplied by 16.
Example:
For AUX5 value "14" and for AUX6 value "2"à input value: 46 (=14 + 2x16)
Starting-kick 65 60 0 ... 14
(LD-G-30: 0)
(LD-G-31: 2)
(LD-G-32: 0)
(LD-G-33: 0)
(LD-G-34: 0)
(LD-W-32: 55)
(LD-W-33: 65)
= short-time increase of
motor voltage while starting
to clear the breakaway
torque.
Example: CV#65 = 6 à The motor voltage while starting is equivalent to the
voltage applied in operation at speed level 6. It is reduced immediately to the set
speed level with the braking rate defined in CV#4. Thus, when altering the value
for CV#4 it may be necessary to alter CV#65, too.