User manual

ST Assembler-Linker Getting started
Doc ID 11392 Rev 4 11/89
2 Getting started
Installing the ST Assembler-Linker
The ST Assembler-Linker is delivered as part of the STVD toolset. A free installation
package is available at www.st.com. To install it:
● either select ST7/STM8>ST toolset from the main menu of the Microcontroller
Development Tools CD-ROM,
● or run the installation executable that you have downloaded from the internet.
Note: See the release notes for more guidance on installing the software components.
After installation, the installation directory should contain the files listed in Table 1.
.
Up-to-date release notes are provided in PDF format. An additional file contains
demonstration examples.
Table 1. Description of installed files
ASM.EXE ST assembler
LYN.EXE ST linker
OBSEND.EXE Output file formatter
ABSLIST.EXE List file post processor
LIB.EXE Librarian
ST7.TAB ST7 description file
STM8.TAB STM8 description file
ASLI.BAT Batch file ASM+LYN+OBSEND+ABSLIST
ASM_LNK_RELEASE_NOTES.PDF Release notes