Specifications

1 - 18 LI4278 Product Reference Guide
Radio Communications
The linear imager scanner can communicate with remote devices via Bluetooth Technology Profile Support, or
by pairing with a cradle. For radio communication parameters, detailed information about operational modes,
Bluetooth Technology Profile Support and pairing, see Chapter 4, RADIO COMMUNICATIONS.
Configuring the Linear Imager Scanner
Use the bar codes in this manual or the 123Scan
2
configuration program to configure the linear imager
scanner. See Chapter 5, USER PREFERENCES & MISCELLANEOUS SCANNER OPTIONS for information
about programming the linear imager scanner using bar code menus. Also see each host-specific chapter to
set up connection to a specific host type. See Chapter 10, 123SCAN2 to configure the linear imager scanner
using this configuration program.
Accessories
The linear imager scanner and cradle accessories that are available separately include:
• Power supplies for applications that do not supply power over the host cable. See each host interface
chapter for set up information.
• Wall-mount bracket for mounting the cradle vertically. Refer to the CR0078-S/CR0008-S Cradle Quick
Reference Guide (p/n 72-135874-xx) for a wall mounting template and installation instructions.
• Lanyard for wearing the linear imager scanner on a wrist.
Lanyard
The lanyard attaches to the inside of the linear imager scanner battery door latch.
Figure 1-15 Attached Lanyard