Specifications

13-11
Miscellaneous Scanner Options
Synapse Interface
The auto-detection of a Synapse cable needs to vary in duration depending on the type of
Synapse connection. If a scanner is connected to another scanner using a Synapse cable
then the Auxiliary Synapse Port connection should be used. In all other cases, where the
cable is used, the default setting is recommended.
Should the user want to disconnect and reconnect the scanner from a Synapse cable that
is connected to a live host via a Synapse, then the "Plug and Play" setting should be used.
This setting should not be changed from the default if an on-board wedge host is enabled.
“Plug and Play” Synapse Connection
*Standard Synapse Connection
Auxiliary Synapse Port Connection