Specifications

14-8
LS 2208 Product Reference Guide
Special Commands
Pause Duration
This parameter along with the Send Pause parameter on page -29 allows a pause to be
inserted in the data transmission. Pauses are set by scanning a two-digit number (i.e., two
bar codes), and are measured in 0.1 second intervals. For example, scanning bar codes
“0” and “1” inserts a 0.1 second pause; “0” and “5” gives you a 0.5 second delay. Numeric
bar codes begin on page D-1 in Numeric Bar Codes. If you make an error or wish to
change your selection, scan Numeric Cancel on page D-4.
Pause Duration
Begin New Rule
Scan this bar code to start entering a new rule.
Begin New Rule