Specifications

6-2
LS 2208 Product Reference Guide
Throughout the programming bar code menus, default values are indicated with asterisks
(
*).
Connecting an RS-232 Interface
This connection is made directly from the scanner to the host computer.
Figure 6-1. RS-232 Direct Connection
1. Connect the RS-232 interface cable to the bottom of the scanner, as described in
Installing the Interface Cable on page 1-3.
2. Connect the other end of the interface cable to the serial port on the host.
3. Connect the power supply.
4. Scan appropriate bar codes in this chapter to match your host settings.
*Baud Rate 9600
Feature/Option
* Indicates Default
Serial Port Connector to Host
Interface cable
Power supply
Interface cable
Power supply cable