Specifications

6-3
RS-232 Interface
RS-232 Default Parameters
Table 6-1 lists the defaults for RS-232 host parameters. If you wish to change any option,
scan the appropriate bar code(s) provided in the Parameter Descriptions section beginning
on page 6-5.
Note:See Appendix A, Standard Default Parameters for all user
preferences, hosts, symbologies, and miscellaneous default
parameters.
Table 6-1. RS-232 Host Default Table
Parameter Default
Page
Number
RS-232 Host Parameters
RS-232 Host Types Standard
1
6-7
Baud Rate 9600 6-10
Parity Type None 6-12
Stop Bit Select 1 Stop Bit 6-13
Data Bits 8-Bit 6-13
Check Receive Errors Enable 6-14
Hardware Handshaking None 6-16
Software Handshaking None 6-17
Host Serial Response Time-out 2 Sec 6-20
RTS Line State Low RTS 6-21
Beep on <BEL> Disable 6-21
Intercharacter Delay 0 msec 6-22
Nixdorf Beep/LED Options Normal Operation 6-23