User’s Guide Digital Audio Baby Monitor Models: MBP160, MBP160-2 The features described in this User’s Guide are subject to modifications without prior notice.
Welcome... to your new Motorola Digital Audio Baby Monitor! Thank you for purchasing the Digital Audio Baby Monitor. Now you hear your baby sleeping in another room. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of the Parent Unit 1 8 1. 2. 3. 4. 5. 6 2 9 5 3 4 10 Sound level indicator It shows the sound level detected by the baby unit and the speaker volume set on the parent unit. Sound level detected by the baby unit: If no LED lights up, no sound is detected. If more LEDs light up, the sound level is high. Speaker volume on the parent unit: If more LEDs light up when adjusting speaker volume, the speaker volume is high.
Overview of the Baby Unit 1 2 3 1. 2. 3. Power/Link indicator On steadily when the baby unit is powered on and linked to the parent unit. Off when the baby unit is powered off. Flashes when it is out of range of the parent unit. Power ON/OFF button Microphone Important guidelines for installing your digital baby monitor • To use your baby unit and parent unit together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions.
1. 2. Safety Instructions ..................................................................................... 6 Getting Started.......................................................................................... 9 2.1 2.2 2.3 3. Using Your Digital Audio Baby Monitor.................................................. 12 3.1 3.2 3.3 4. 5. 6. 7. 8. Baby unit power supply...............................................................................
1. Safety Instructions WARNING: Strangulation Hazard. Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft (1m) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided.
ENGLISH BABY MONITOR SET UP & USE: • Determine a location for the digital audio baby monitor that will provide the best audio reception of your baby in his/her crib. • Place the Baby Unit on a flat surface, such as a dresser, bureau or shelf, or mount the Unit on a wall securely using the keyhole slots under the stand. • NEVER place the Baby Unit or cords within the crib.
CAUTION There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Use only rechargeable battery pack with rating: 2.
2.1 ENGLISH 2. Getting Started Baby unit power supply DC JACK DC PLUG 1. 2. Insert the DC plug of the power adapter with the bigger DC plug into the DC jack on the back of the baby unit. Connect the other end of the power adapter to a suitable electrical outlet. NOTE Only use the provided power adapter.
2.2 Parent unit battery installation and power supply A rechargeable battery pack is supplied and should be fitted, so that the parent unit can be carried to another location without losing the link with the baby unit(s). Charge the parent unit before using it for the first time or when the parent unit indicates that battery is low. We recommend that the unit be charged for 15 hours prior to first use. DC JACK DC PLUG 1. 2. 3. 4. 5. 6. 7. Slide off the battery compartment cover.
Desktop stand on parent unit ENGLISH 2.3 Belt clip position The parent unit comes with a desktop stand attached to the back of the unit. To place the parent unit on a desk, simply pull out the stand, as shown above. NOTE Place the parent unit on a flat, even surface.
3. Using Your Digital Audio Baby Monitor Please read these instructions carefully, and be aware that this digital audio baby monitor is only intended as an aid. It is not a substitute for responsible and proper adult supervision. 3.1 Power on or off the baby unit • Press and hold on. • Press and hold turns off. 3.2 to power on the baby unit. The Power/Link indicator turns again to power off the baby unit.
ENGLISH 4. Disposal of the Device (Environment) At the end of the product lifecycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point.
5. Cleaning Clean your Digital Audio Baby Monitor with a slightly damp cloth or with an antistatic cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the Digital Audio Baby Monitor with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty. • Keep your Digital Audio Baby Monitor away from hot, humid areas or strong sunlight, and do not let it get wet.
Power/Link Indicator on the parent unit does not come on • Check whether the parent unit is powered on. • Check whether the supplied battery pack is correctly installed and that they are not drained. • Recharge the parent unit by connecting it to the electrical outlet. Power/Link Indicator on the baby unit flashes • The parent unit and the baby unit may be out of range with each other. Reduce the distance between the units, but not closer than 3 feet. • The baby unit may be powered off.
The digital baby monitor system produces a high-pitched noise • The parent unit and the baby unit are too close to each other. Make sure that the parent unit and baby unit are at least 3 feet away from each other. • The speaker volume of the parent unit may be set too high. Decrease the volume of the parent unit. Refer to section 3.3 for volume level settings. Battery pack in the parent unit is running low quickly • The volume level of the parent unit may be set too high, which consumes power.
ENGLISH 7. General Information If your product is not working properly... 1. 2. 3. Read this User's Guide or the Quick Start Guide. Visit our website: www.motorola.com Contact Customer Service at US and Canada 1-888-331-3383 Email: support@motorolamonitors.com To order a replacement battery pack for parent unit, contact customer service.
What Other Limitations Are There? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. Consumer Products and Accessories The balance of the original warranty or that are Repaired or Replaced for Ninety (90) days from the date returned to the consumer, whichever is longer. Exclusions Normal Wear and Tear.
Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services.
Warning: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
8. Technical Specifications BABY UNIT: Frequency 1921.536 - 1928.448 MHz Channels 10 Operating temperature 41ºF - 113ºF Power supply adapter Input 100-240Vrms Rating Output 6VDC, 450mA PARENT UNIT: Frequency 1921.536 - 1928.448 MHz Channels 10 Operating temperature 41ºF - 113ºF Battery rating 2.4V 400mAh Ni-MH battery pack Power supply adapter Input 100-240Vrms Rating Output 6VDC, 450mA Specifications are subject to change without prior notice.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2014 Motorola Mobility LLC. All rights reserved. US_EN Version 4.