User’s Guide MBP20 Baby Monitor The features described in this user's guide are subject to modifications without prior notice.
Welcome... to your new Motorola Baby Monitor! Thank you for purchasing the MBP20. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their play room. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of your Parent unit 1 9 8 7 2 3 5 3 UP / Volume + In idle mode: Press to increase the speaker volume. In menu mode: Press to move up the menu list. 4 Menu / OK In idle mode: Press to access the main menu. In menu mode: Press to access the sub-menu, or confirm the settings. 5 DOWN / Volume In idle mode: Press to decrease the speaker volume. In menu mode: Press to move down the menu list. 6 Talk Press and hold to talk back through the baby unit. Release to quit the talk mode.
Parent Unit Display Icons Indicates when parent unit or baby unit is playing lullaby. Behaviors Description Indicates the signal strength between baby unit and parent unit. The more blocks, the stronger connection signal. Flashes when parent unit is out of range. Indicates no connection between the baby unit and parent unit. Indicates when speaker of parent unit is muted. Indicates the speaker volume level of parent unit. Indicates when timer alarm is activated. Indicates when the sound alert is set on.
Overview of your Baby unit 10 1 1 2 3 9 5 8 7 4 6 Infrared Light 4 x Infra-red LEDs for night vision illumination 2 Camera Lens 3 Power Indicator On when the baby unit is switched on. Off when the baby unit is switched off. 4 UP / Volume + Press to increase the speaker volume. 5 Power Press and hold to power on/off the baby unit. 6 DOWN / Volume Press to decrease the speaker volume. 7 Stop Press to stop the lullaby playing. 8 Play Press to start playing the selected lullaby.
Important guidelines for installing your Baby Monitor • To use your baby unit and parent unit together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions. • Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic doors or reinforced concrete, between the baby and parent unit may block the radio signal.
1. SAFETY INSTRUCTIONS ................................... 8 2. GETTING STARTED............................................ 9 2.1 Baby unit power supply.......................................9 2.2 Parent unit battery installation.............................9 2.3 Belt clip on parent unit ......................................10 3. USING YOUR BABY MONITOR........................ 11 3.1 Power on/off the parent unit..............................11 3.2 Power on/off the baby unit ...............................
1. SAFETY INSTRUCTIONS WARNING: STRANGULATION HAZARD - Keep the adapter cord out of the baby's reach. NEVER place the baby monitor or its cord within the crib. Secure the cord well away from the baby's reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided. CAMERA SET UP & USE: • Determine a location for the CAMERA that will provide the best view of your baby in the crib.
2. GETTING STARTED 2.1 Baby unit power supply 2.2 Parent unit battery installation A rechargeable battery pack is supplied and MUST be fitted in the parent unit in order for the parent unit to work. Charge the parent unit before you use it for the first time or when the parent unit indicates that the battery is low. DC SOCKET DC PLUG Battery SOCKET Battery PLUG 1. Insert the DC plug of the power adapter with smaller DC plug into the DC socket in the side of the baby unit, as shown. 2.
3. Insert the plug of the battery pack into the socket inside the battery compartment, and fit the battery pack into the compartment. 2.3 Belt clip on parent unit 4. Replace the battery compartment cover, and reinstall the belt clip / stand (refer to section 2.3). 5. Insert the DC plug of the power adapter with the larger DC plug into the DC socket in the side of the parent unit. 6. Connect the other end of the power adapter to a suitable mains power outlet. 7. The Charging Indicator comes on.
3. USING YOUR BABY MONITOR 3.3 Please read these instructions carefully, and be aware that this baby monitor is only intended as an aid. It is not a substitute for responsible, correct parental supervision. There are 5 volume levels on the baby unit, and 6 levels on the parent unit, including VOLUME OFF. The volume level of parent unit will be shown on the status bar when you adjust the volume. 3.1 Power on/off the parent unit 1.
3.4.1 Adjust talk back volume The baby unit has 5 volume levels from Level 1 to Level 5. Press > or < on the baby unit to increase or decrease the volume respectively. NOTE If a lullaby is playing, it will stop during Talk Back, but will restart from the beginning when the Talk Back ends. 3.
NOTE The parent unit still carries on audio monitoring even if the video capture is turned off. 4. Parent unit settings 4.1 Set the language 1. Press 1 to access the main menu. To switch the video feed from the current monitoring parent unit to the other parent unit which is not in video monitoring mode: 2. Press + or - to select LANGUAGE. 1. Press 6 on the current video monitoring parent unit, the screen will be blank without video image received. 4. Press + or - to select the desired language. 2.
4.2.2 Set the timer 1. Repeat steps 1 to 3 in section 4.2.1. 2. Press + or - to select SET TIMER. 3. Press 1 and then set the number of hours (00 to 12) using the + or - keys. 4. Press 1 and then set the number of minutes (00 to 59) using the + or - keys. 5. Press 1 to confirm. NOTE When the timer period is reached, the unit will emit an alert beep and 00:00 on the screen. You can press any button to stop the beeps.
4.6 Reset You can restore all the adjustable settings back to their original factory settings. 1. Press 1 to access the main menu. 2. Press + or - to select RESET. 3. Press 1 to display CONFIRM?. 4. Press 1 to confirm the reset. 5. DISPOSAL OF THE DEVICE (ENVIRONMENT) At the end of the product lifecycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment.
6. CLEANING 7. TROUBLESHOOTING Clean your MBP20 with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. Link light on the parent unit does not come on Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty. • Keep your MBP20 away from hot, humid areas or strong sunlight, and do not let it get wet.
• Battery pack in parent unit may be running low. Connect the parent unit to the mains power with the supplied power adaptor for recharging. Cannot view the video image of baby from the parent unit • Video feed maybe turned off. Activate the video feed by pressing 6. • The parent unit and the baby unit may be out of range with each other. Reduce the distance between the units, but not closer than 5 feet. • Battery pack in parent unit may be drained.
8. GENERAL INFORMATION If your product is not working properly... 1. Read this User's Guide. 2. Visit our website: www.motorola.com 3. Contact Customer Service at US and Canada 1-888-331-3383 To order a replacement battery pack for the parent unit, contact customer service. Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE").
ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may also have other rights that vary from one jurisdiction to another.
Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, BINATONE or its authorized service centers, are excluded from coverage. Altered Products.
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. This device complies with Industry Canada licence-exempt RSS standard(s).
9. TECHNICAL SPECIFICATIONS Parent Unit : Baby Unit: Frequency 1921.536 MHz - 1928.448 MHz Channels 5 Operating temperature 5ºC - 45ºC Frequency 1921.536 MHz - 1928.448 MHz Channels 5 Operating temperature 5ºC - 45ºC Image sensor Color CMOS 30M Pixels Lens f 3.6mm, F 2.4 IR LED 4 pcs Baby unit voltage 100 - 240V (AC voltage, 50/60Hz) Baby unit voltage (Adapter output) 22 6VDC @600mA Display 1.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2011 Motorola Mobility, Inc. All rights reserved. Version 2.