User’s Guide MBP28, MBP28/2, MBP28/3, MBP28/4 MBP28 Twin, MBP28 Triple, MBP28 Quad Baby Monitor The features described in this user's guide are subject to modifications without prior notice.
to your new Motorola Baby Monitor! Thank you for purchasing the MBP28. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their play room. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of your Parent unit 3 Menu / OK 1 In idle mode: Press to access the main menu. In menu mode: Press to access a sub-menu, or confirm the settings. 4 DOWN / Volume - In idle mode: Press to decrease the speaker volume. In menu mode: Press to move down the menu list. 5 Talk 7 In idle or menu mode: Press and hold to talk back through the camera unit. Release to quit the talk mode. When LCD is off: Press to turn on the LCD. 6 LCD On / Off 6 In monitoring mode: Press to turn on/off the LCD.
Parent Unit Display Icons Function Indicates the signal strength between the camera unit and parent unit. The more blocks, the stronger the connection signal. Disappears when no connection between the camera unit and parent unit. Indicates when the speaker of the parent unit is muted. Indicates the speaker volume level of the parent unit, from 1 (quiet) to 5 (loud). Indicates when the camera unit is playing a lullaby. Indicates the current camera unit that is being previewed on the screen.
Menu Structure of the Parent Unit MAIN MENU BU SELECTION LANGUAGE TIMER SUB MENU Baby Unit 1 Baby Unit 2 Baby Unit 3 Baby Unit 4 All Baby Units Note: Only Baby Units registered will be shown in the list.
Overview of your Camera unit 10 1 1 2 3 9 5 8 7 4 6 Infrared Lights 4 x infra-red LEDs for night vision illumination. 2 Camera Lens 3 Power/Link Indicator 0 On steadily when the camera unit is switched on and linked to the parent unit. Flashes quickly when the camera unit is in registration mode. Flashes slowly when the camera unit is out of range or not registered to a parent unit. Off when the camera unit is switched off. 4 UP / Volume + > Press to increase the speaker volume.
Important guidelines for installing your Baby Monitor • To use your camera unit and parent unit together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions. • Any large metal object, like a refrigerator, a mirror, a filing cabinet, a metallic door or reinforced concrete, between the camera and parent unit may block the radio signal.
1. SAFETY INSTRUCTIONS.................................. 9 2. GETTING STARTED ........................................ 10 4.7 Register a camera unit ................................... 17 4.8 Reset .............................................................. 17 2.1 Camera unit power supply.............................. 10 2.2 Parent unit battery installation ........................ 11 2.3 Belt clip/stand on parent unit .......................... 12 5. DISPOSAL OF THE DEVICE (ENVIRONMENT)..............
ENGLISH 1. SAFETY INSTRUCTIONS WARNING: STRANGULATION HAZARD - Keep the adapter cord out of the baby's reach. NEVER place the camera unit or its cord within the crib. Secure the cord well away from the baby's reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided. This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User's Guide, safe to use.
• To avoid the risk of electric shock, do not open the housing of the camera or parent units, other than the battery compartment. • This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Use only battery pack with rating: 2.4V 750mAh. 2. GETTING STARTED 2.
ENGLISH 2.2 Parent unit battery installation A rechargeable battery pack is supplied and should be fitted, so that the parent unit can be moved without losing the link and picture from the camera unit(s). Charge the parent unit before you use it for the first time or when the parent unit indicates that the battery is low. 1. Take off the belt clip/stand. 2. Slide off the battery compartment cover. 3.
2.3 Belt clip/stand on parent unit 3. USING YOUR BABY MONITOR Please read these instructions carefully, and be aware that this baby monitor is only intended as an aid. It is not a substitute for responsible, correct parental supervision. 3.1 Belt clip position Desk position 1. The belt clip/stand attaches to the back of the parent unit and clips into the locking slots on each side. NOTE It will only fit one way, as indicated by UP and the arrows on the inside of the clip. 2.
ENGLISH NOTE If you place the parent and camera units too close together, you may hear a high pitched noise. This is not a fault. The units are designed to be operated at some distance apart, e.g. in separate rooms, so move the units further apart. 3.3 Adjust speaker volume of parent unit and camera unit There are 5 volume levels on the camera unit, and 6 levels on the parent unit, including VOLUME OFF. The volume level of parent unit will be shown on the status bar when you adjust the volume. 1.
Note The current temperature at the camera unit is shown on the parent unit status bar whenever it is displayed. 3.6 Lullaby There are 3 lullabies available to play for your baby, either repeating one lullaby or repeating through all three lullabies. 1. Press 2 on the camera unit to select the lullaby and start playing when the camera is linked with the parent unit. 2. During playback, press 2 to step through the different lullabies. OR Press 8 on the camera unit to start playing the selected lullaby.
ENGLISH 4. PARENT UNIT SETTINGS 4.1 Set the language 1. Press 1 to access the main menu. 2. Press + or - to select LANGUAGE. 3. Press 1 and + or - to select the desired language. 4. Press 1 to confirm. 4.2 Turn on the timer 1. Press 1 to access the main menu. 2. Press + or - to select TIMER. 3. Press 1 and + or - to select ACTIVATION. 4. Press + or - to select ON or OFF. 5. If you select ON, press + or mode from ONCE or REPEATED. 6. Press 1 to confirm. Set the timer 1.
4.4 Sound alert When the sound alert is set ON, and the parent unit speaker volume is off, it will cause the parent unit to beep and flash "Sound alert from Baby Unit x" on the display, whenever the sound at the baby unit goes above a preset threshold. 1. Press 1 to access the main menu. 2. Press + or - to select SOUND ALERT. 3. Press 1 and + or - to turn on or off the sound alert. 4. Press 1 to confirm. *The parent unit beeps only if the sound level at the camera reaches a preset sensitivity level.
ENGLISH 4.7 Register a camera unit 4.8 Reset IMPORTANT When you purchase your baby monitor system, all cameras are already registered to the parent unit, so you do not need to register them. You can restore all the adjustable settings of the registered camera units and parent unit to the original factory settings. Camera registration is only necessary if one has become faulty or if you buy a new one. 2. Press + or - to select RESET. You can register up to 4 cameras to the parent unit. 4.
5. DISPOSAL OF THE DEVICE (ENVIRONMENT) At the end of the product lifecycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point.
ENGLISH 7. TROUBLESHOOTING Power Indicator on the parent unit does not come on • Check whether the parent unit is powered on. • Check whether the supplied battery pack is correctly installed and that they are not drained. • Recharge the parent unit by connecting it to the power supply. Power/Link Indicator on the camera unit flashes • The camera unit may be not registered to the parent unit. Refer to section 4.7 to register the camera unit.
The baby monitor system produces a highpitched noise • The parent unit and the camera unit may be too close to each other. Make sure the parent unit and camera unit is at least 5 feet away from each other. • The speaker volume of the parent unit maybe set too high. Decrease the volume of the parent unit. Battery pack in the parent unit is running low quickly • The LCD brightness may be set too high. Try to decrease the brightness level. Refer to section 4.3 for details.
ENGLISH What will BINATONE do? BINATONE or its authorized distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that do not conform to this Warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.
Exclusions Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this Warranty. Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.
ENGLISH How to Obtain Warranty Service or Other Information? To obtain service or information, please call: US and Canada 1-888-331-3383 You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a BINATONE Authorized Repair Center.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
ENGLISH 9. TECHNICAL SPECIFICATIONS Parent Unit : Camera Unit: Frequency 1921.536 - 1928.448 MHz Frequency 1921.536 - 1928.448 MHz Channels 5 Channels 5 Operating temperature 5ºC - 45ºC Operating temperature 5ºC - 45ºC Image sensor Color CMOS 0.3M Pixels Display 1.8" diagonal TFT LCD Lens f 3.6mm, F 2.4 Display color 65K color LCD IR LED 4 pcs Brightness control 5 steps Battery rating 2.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2012 Motorola Mobility, Inc. All rights reserved. Version 2.