User’s Guide Digital Video Baby Monitor Models: MBP38S, MBP38S-2, MBP38S-3, MBP38S-4 The features described in this User’s Guide are subject to modifications without prior notice.
Welcome... to your new Motorola Digital Video Baby Monitor! Thank you for purchasing your new Motorola Digital Video Baby Monitor. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of the Parent Unit RESET 16 15 11 12 13 14 21 2 7 3 8 4 9 17 5 10 6 1 19 18 Display (LCD screen) Video ON/OFF Key V Press to turn the LCD display ON/ OFF 3. Talk Key T Press and hold to speak to your baby 4. Up Key + Normal Mode: Tilt Up Menu Mode: Up 5. Down Key Normal Mode: Tilt Down Menu Mode: Down 6. Microphone 7. Menu Key M Press to open the Menu options 8. OK Key O 9. Left Key < Normal Mode: Pan Left Menu Mode: Left 10. Right Key > Normal Mode: Pan Right Menu Mode: Right 1.
Parent Unit menu icons Signal Level (4 Levels) Night Vision Mode (Screen changes to Black/White) Talk Mode Battery Level Control (4 Levels) Pan Left Pan Right Tilt Up Tilt Down Zoom Level Control (1X, 2X) Brightness Level Control (8 Levels) Lullaby Control (5 Song Selections) Alarm Setting (6h, 4h, 2h, Off) Temperature Reading (HH ºC / ºF or LL ºC / ºF) Icon & readings turn RED > 29ºC / 84ºF, and reading display HH ºC / ºF > 36ºC / 97 ºF Icon & readings turn RED < 14ºC / 57ºF, and reading display LL ºC / ºF
Overview of Your Baby Unit 9 1 2 4 7 PAIR 11 3 5 6 1. 2. 3. 4. 5. 6. Photo Sensor (Night Vision Mode) Camera Lens Infrared LEDs Power LED Microphone Speaker 10 8 7. ON/OFF Switch 8. Power Adapter Socket 9. Antenna 10. Temperature Sensor 11. Pair Key Important guidelines for installing your Baby Monitor • • • • • To use your Video Monitor Baby and Parent Units together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions.
Table of contents 1. 2. Safety Instructions ..................................................................................... 7 Getting Started........................................................................................ 10 2.1 2.2 2.3 3. Using the Baby Monitor........................................................................... 13 3.1 3.2 3.3 3.4 3.5 3.6 4. Baby Unit Power Supply............................................................................
ENGLISH 1. Safety Instructions WARNING: Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft (1m) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided.
Baby Unit SET UP & USE: ● Choose a location for the Baby Unit that will provide the best view of your baby in their crib. ● Place the Baby Unit on a flat surface, such as a dresser, desk, or shelf or mount the Unit to a wall securely using the keyhole slots on the underside of the stand. ● NEVER place the Baby Unit or cords inside your child's crib. ● Do not place the Baby Unit or cords in the crib or within reach of the baby (the unit and cords should be more than 3 feet away).
ENGLISH • Do not place the Baby Monitor near a heat source. • Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack. • Do not touch the plug contacts with sharp or metal objects. CAUTION Risk of explosion if battery is replaced by an unapproved battery type. Dispose of used batteries according to their instructions.
2. Getting Started 2.1 1. Baby Unit Power Supply Connect the small plug of the power adapter to the Baby Unit (camera) and the other end to the electrical outlet. NOTE Only use the enclosed power adapter (5V DC / 1000mA). 2. 3. 2.2 Slide the ON/OFF switch to the ON position. The power LED will light up in green. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.
Connect the micro USB plug of the power adapter to the Parent Unit and the other end to a suitable electrical outlet. Only use the enclosed power adapter (5V DC / 1500mA) with the micro USB plug. 2. Press and hold the 0 POWER ON/OFF button for 1 second to turn ON the Parent Unit. 3. Once the Baby and Parent Units are switched on, the display on the Parent Unit will show the video captured by the Baby Unit. 4. If there is no connection or you are out of range, the unit will beep every 5 seconds.
2.3 Registration (Pairing) The Baby Monitor is pre-registered to your Parent Unit. You do not need to register it again unless the Baby Unit loses its link with the Parent Unit. To re-register your Baby Unit, or register a new Baby Unit, follow the procedures below: 1. Press the M button of the Parent Unit and the menu bar will pop up. is highlighted, and 2. Press the < LEFT button or > RIGHT button until del/ add/ view/ scan menu will pop up. the add, and press the 3.
3.1 ENGLISH 3. Using the Baby Monitor Setting up • Place the Baby Unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. • Adjust the angle of the Baby Unit's head by rotating the camera up, down, left and right until you are satisfied with the image shown on the Parent Unit.
3.6 Temperature Display (HH °C / °F or LL °C / °F) The temperature reading from the temperature sensor at the back of the Baby Unit will be displayed at the top of the LCD screen. The readings will turn RED if the temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading will change to LL °C / °F if the temperature goes below 1°C / 34°F.
4.1 1. 4.2 1. 2. 3. 4.3 1. 2. 3. 4. 4.4 1. 2. 3. 4.5 1. 2. 3. 4. ENGLISH 4. Parent Unit Menu Options Volume Press the Volume button - or + to adjust the volume level, the icon will pop up and you can select the desired volume level from level 0~8. (The default volume level setting is level 5.) Brightness Press the M button and the menu bar will pop up. is highlighted.
4.6 Camera Control 4.6.1 Add (pair) a camera Press the M button and the menu bar will pop up. is highlighted, and Press the < LEFT button or > RIGHT button until del/ add/ view/ scan menu will pop up. the add, and press the 3. Press the + UP button or - DOWN button to select O button to confirm. 4. Camera / / / will pop up, press the + UP button or - DOWN button to select the desired Camera, and press the O button to start searching for a camera unit.
Delete a camera Press the M button and the menu bar will pop up. is highlighted, and Press the < LEFT button or > RIGHT button until del/ add/ view/ scan menu will pop up. the del , and press the 3. Press the + UP button or - DOWN button to select O button to confirm. 4. Camera will pop up, press the + UP button or - DOWN / / / button to select the desired Camera, and press the O button to delete that registration.
4.9 Video You can record a video of your baby with this function. The videos will be stored on the SD Memory Card, so please ensure the memory card has enough free memory. Press the M button and the menu bar will pop up. is highlighted. Press the < LEFT button or > RIGHT button until Press the + UP button or - DOWN button to select , and press O button to start video recording, press O button to stop. and press O 4. Press the + UP button or - DOWN button to select button to play back the video.
ENGLISH 5. Disposal of The Device (environment) At the end of the product lifecycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be reused if you take them to a recycling point.
6. Cleaning Clean the Baby Monitor with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals – this may cause permanent damage to the product which is not covered by the warranty. • Keep the Baby Monitor away from hot, humid areas or strong sunlight, and don't let it get wet.
ENGLISH 7. Help Display No display • Try recharging or press the RESET button once. • Reset the units. Press the RESET button once on the Parent Unit and unplug both the units' electrical power, then plug them back in. • Is the unit turned on? Press and hold the ON/OFF button 0 on the Parent Unit to turn it ON. • Is the correct camera selected? Change the camera number, if necessary. • Is the video display turned on? Press the VIDEO ON/OFF button V to turn it on.
Interference Noise interference on your Parent Unit • Your Baby and Parent Units may be too close. Move them farther apart. • Make sure there is at least 3 to 6 feet between the 2 units to avoid audio feedback. • lf the baby unit is too far away it may be out of range, so move the Baby Unit closer to the Parent Unit. • Make sure the Baby and Parent Units are not near other electrical equipment, such as a television, computer or cordless/mobile telephone. • Use of other 2.
ENGLISH 8. General Information lf your product is not working properly.... 1. Read this User's Guide or the Quick Start Guide. 2. Contact Customer Service: US and Canada 1-888-331-3383 Email: support@motorolahome.com On the Web: www.motorolahome.com/help To order a replacement battery pack, contact customer service.
What Other Limitations Are There? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. Consumer Products and Accessories The balance of the original warranty or that are Repaired or Replaced for Ninety (90) days from the date returned to the consumer, whichever is longer. Exclusions Normal Wear and Tear.
Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, BINATONE or its authorized service centers, are excluded from coverage. Altered Products.
FCC Part l5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
WARNING Changes or modifications, to this equipment not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The socket-outlet shall be installed near the equipment and shall be easily accessible.
ENGLISH Technical Specifications Baby Unit Frequency 2.4 GHz to 2.48 GHz Image sensor color CMOS 1M Pixels Lens f 2.5mm, F 2.8 IR LED 8 pcs Power Adapter Ten Pao International Ltd. S005ANU0500100 (or S006AKU0500100) Input: 100-240V AC, 50/60Hz, 300mA; Output: 5.0V DC, 1000mA WARNING Use only with supplied power supply.
Parent Unit Frequency 2.4 GHz to 2.48 GHz Display 4.3" diagonal TFT LCD Display colors 16.7M color LCD Brightness control 8 steps Volume control 8 steps Power Adapter Ten Pao International Ltd. S009GU0500150 (or S012BEU0500150) Input: 100-240V AC, 50/60Hz, 300mA; Output: 5.0V DC, 1500mA WARNING Use only with provided power supply. Battery (built-in) Motorola BF6X 3.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2015 Motorola Mobility LLC. All rights reserved. EN_US Version 9.