User’s Guide Video Baby Monitor Models: MBP421, MBP421/2, MBP421/3, MBP421/4 The features described in this User’s Guide are subject to modifications without prior notice.
Welcome... to your new Motorola Video Baby Monitor! Thank you for purchasing the MBP421. Now you can view and hear your baby sleeping in another room or you can monitor your older children in their play room. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of the Parent Unit 1 2 3 5 7 4 6 1. 2. 3. 4. LCD display Battery level indicator On when the parent unit battery is being charged. Flashes when the parent unit battery is low and needs charging. Off when the parent unit battery is fully charged, or when the battery is not installed. Power ON/OFF indicator On when the parent unit is turned on. Off when the parent unit battery is fully charged. Flashes when in pairing process, or when searching for a baby unit.
Parent Unit display icons Connection status displays when a strong signal strength is detected between the baby unit and the parent unit. , or displays when a moderate signal strength is detected between the baby unit and the parent unit. displays when the link between the baby unit and the parent unit is lost. displays when the parent unit is searching for a baby unit. Current view status - Displays the number of which baby unit that is being viewed.
Overview of Your Baby Unit 1 2 3 7 4 5 6 8 1. 2. 3. Camera lens Infrared lights 4 x infra-red LEDs for night vision illumination. Power/Link indicator On steadily when the baby unit is powered on and currently linked to parent unit. Flashes when the baby unit is not linked to a parent unit; or the pairing process is in progress; or the parent unit is not viewing this baby unit. 4. 5. 6. 7. 8. Microphone Control key panel PAIR Press and hold to pair with the parent unit.
Table of contents 1. 2. Safety Instructions ..................................................................................... 7 Getting Started.......................................................................................... 9 2.1 2.2 2.3 3. Using Your Baby Monitor ........................................................................ 12 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 4. 5. 6. 7. 8. 6 Connecting baby unit to power ...............................................................
ENGLISH 1. Safety Instructions WARNING: STRANGULATION HAZARD - Keep the unit and adapter cord more than 3 feet from the crib and out of the baby's reach. NEVER place camera or cords within the crib. Secure the cords more than 3 feet away from the baby's reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided. CAMERA SET UP & USE: ● Determine a location for the Baby Unit that will provide the best view of your baby in his/her crib.
• Do not use the Baby Monitor in damp areas or close to water. • Do not install the Baby Monitor in extreme cold or heat, direct sunlight, or close to a heat source. • Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack. • Only insert a battery pack of the same type. • Do not touch the plug contacts with sharp or metal objects. • Connect the power adapters to easily accessible electrical outlets.
2.1 ENGLISH 2. Getting Started Connecting baby unit to power DC JACK DC PLUG 1. 2. Insert the DC plug of the power adapter with the smaller DC plug into the DC jack on the side of the baby unit. Connect the other end of the power adapter to a suitable power outlet. NOTE Only use the provided power adapter.
2.2 Installing the battery and connecting the parent unit to power A rechargeable battery pack is supplied and should be fitted, so that the parent unit can be moved without losing the link and picture from the baby unit(s). Charge the parent unit before use. We recommend that the unit be charged for 15 hours prior to first use. Battery JACK Battery PLUG DC PLUG DC JACK 1. 2. 3. 4. 5. 6. 7. Remove the belt clip/stand if it is attached to the parent unit. Slide off the battery compartment cover.
Belt clip/stand on parent unit ENGLISH 2.3 Belt clip position Desktop position 1. The belt clip/stand attaches to the back of the parent unit and clips into the locking slots on each side. NOTE It will only fit one way, as indicated by UP and the arrows on the inside of the clip. 2. 3. The unit comes with the accessory fitted in the belt clip position.
3. Using Your Baby Monitor Please read these instructions carefully, and be aware that this baby monitor is only intended as an aid. It is not a substitute for responsible and proper adult supervision. 3.1 Power on or off the baby unit • Press and hold • Press and hold turns off. 3.2 to turn on the baby unit. The Power/Link indicator turns on. again to turn off the baby unit. The Power/Link indicator Power on or off the parent unit • Press and hold to turn on the parent unit.
3.6 Press - or + to scroll to . Press < or > to adjust the brightness. Press MENU/SELECT to confirm your selection. ENGLISH 2. 3. 4. Adjust the sound sensitivity of the baby unit You can use the parent unit to set the sound sensitivity level of the baby units from Level 1 to Level 5. The higher the sound sensitivity level, the more sensitive the baby unit is in detecting sounds for transmission to the parent unit. 1. 2. 3. 4. 3.7 Press MENU/SELECT when the parent unit is not in use.
3.9 Zoom You can zoom in or out while viewing an image from the baby unit. 1. 2. 3. Press > to zoom in. Press and hold +, -, < or > to move the zoomed image upward, downward, leftward or rightward correspondingly. Press < to zoom out. 3.10 Pairing and replacing baby unit(s) The system comes with baby unit(s) already paired with the parent unit. You can pair a maximum of four baby units to your parent unit. Each new baby unit must be paired to the parent unit before use.
ENGLISH 4. Disposal Of The Device (Environment) At the end of the product lifecycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point.
5. Cleaning Clean your MBP421 with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the MBP421 with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty. • Keep your MBP421 away from hot, humid areas or strong sunlight, and do not let it get wet. • Every effort has been made to ensure high standards of reliability for your MBP421.
Power Indicator on the parent unit does not come on • Check whether the parent unit is powered on. • Check whether the supplied battery pack is correctly installed and that they are not drained. • Recharge the parent unit by connecting it to the power supply. Power/Link Indicator on the baby unit flashes • The baby unit may be not paired to the parent unit. Refer to section 3.12 to pair the baby unit. • The parent unit and the baby unit may be out of range with each other.
Cannot view the video image of the object from the parent unit • The LCD brightness may be set too low. Try to increase the brightness level. Refer to section 3.6 for details. • The parent unit and the monitoring baby unit may be out of range with each other. Reduce the distance between the units, but not closer than 3 feet. • Battery pack in the parent unit may be drained. Connect the parent unit to the electrical outlet with the supplied power adapter for recharging.
ENGLISH 7. General Information If your product is not working properly... 1. 2. 3. Read this User's Guide or the Quick Start Guide. Visit our website: www.motorola.com Contact Customer Service at US and Canada 1-888-331-3383 Email: motorola@encompass.com To order a replacement battery pack for parent unit, contact customer service.
What Other Limitations Are There? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. Consumer Products and Accessories The balance of the original warranty or that are Repaired or Replaced for Ninety (90) days from the date returned to the consumer, whichever is longer. Exclusions Normal Wear and Tear.
Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services.
Warning: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
8. Technical Specifications BABY UNIT: Frequency 2402 - 2478.5 MHz Channels 21 Operating temperature 41ºF - 113ºF Image sensor Color CMOS 0.3M Pixels Lens f 3.6mm, F 2.4 IR LED 4 pcs Power supply adapter Input 100-240VAC, 50/60Hz, 150mA Rating Output 6VDC, 600mA. PARENT UNIT: Frequency 2402 - 2478.5 MHz Channels 21 Operating temperature 41ºF - 113ºF Display 1.8" diagonal TFT LCD Display color 65K color LCD Brightness control 5 steps Battery rating 2.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2014 Motorola Mobility LLC. All rights reserved. Version 8.
