User's Guide

Using Your Baby Monitor 14
ENGLISH
3.8 Delete a Baby Unit
You can choose to remove a paired Baby Unit from the Parent Unit.
1. Press when the Parent Unit is in camera viewing mode.
2. Press < or scroll to .
3. Press
or to select the desired Baby Unit ( 1 , 2 , 3 or 4 ).
4. Press O, then < or to choose
YES () or NO (X).
5. Press O to confirm your selection.
NOTE
You cannot delete a Baby Unit if it is the only one paired.
3.9 Set the screen off time of the Parent Unit
You can set the screen off time of the Parent Unit after being in idle mode for a
particular time interval.
1. Press when the Parent Unit is in camera viewing mode.
2. Press < or to scroll to .
3. Press
or select ( 60m , 30m , 5m or OFF ).
4. Press O to confirm your selection.
3.10 Zoom
You can zoom in or out while viewing the image from Baby Unit.
1. Press to zoom in.
2. Press and hold <, ,
or to move the zoomed image left, right, up or
down correspondingly.
3. Press to zoom out.
3.11 Night Vision Mode
The Baby Unit has infra-red LEDs for picking up clear images in the dark. When
the built-in light sensor on the front of the unit detects a low level of ambient
light, the LEDs will activate automatically and the screen on the Parent Unit will
display in black and white. The icon will be displayed at the top of the
screen.