User's Guide

Getting Started 11
ENGLISH
1. Connect the DC plug of the power adapter to the Parent Unit and the
other end to a suitable mains power outlet. Only use the enclosed power
adapter (5V DC / 1000mA) with the micro USB plug.
2. Press and hold the 0 POWER ON/OFF button for 3 seconds to turn ON
the Parent Unit.
3. Once the Baby and Parent Units are switched on, the display on the Parent
Unit will show the color video captured by the Baby Unit, but if the baby's
room is dark, the video will display in black and white, with a icon
showing, due to the infra-red illumination by the Baby Unit.
4. If there is no connection or you are out of range, the video display will go
off, a symbol will appear on the screen, and the Parent Unit will beep
repeatedly. Move the Parent Unit closer to the Baby Unit until the link is re-
established.
5. Press and hold the 0 POWER ON/OFF button, until the Parent Unit On-
Off LED turns off, to turn OFF the Parent Unit.
NOTE
The battery icon turns RED to indicate that the battery is low, and the
parent unit will beep about every 15 seconds. The battery needs to be
recharged; it will take16 hours to charge fully.
When charging
1. If the Parent Unit is turned OFF when the adapter is plugged in, it will turn on
automatically and the Parent Unit On-Off LED at the top left will light up;
indicating that the adapter is plugged in and charging is continuing.
2. Whilst the power is ON, and the adapter is plugged in, the battery icon at
the top right corner of the screen will show that the battery is charging.