User Manual
ENGLISH
Prior To Use 11
3. PRIOR TO USE
1. The key to obtaining accurate readings is a clean sensor.
To clean the sensor, use a cotton swab slightly moistened with alcohol to
gently wipe its surface, and then immediately wipe dry using a clean cotton
swab.
Wait at least 20 minutes to make sure that the sensor is completely dry
before taking temperature.
2. Make sure the ear canal is clean. If you have cleaned the ear, please wait for
5 to 10 minutes before measuring temperature.
3. If the temperature of the storage area diers greatly from that of the
measuring area, please wait until the thermometer temperature has
equalized to the room temperature, about 30 minutes, prior to use.
4. Please open the battery cover and install 2 AAA batteries, which can be
found inside the packaging. Once batteries are installed, the thermometer
will then turn on automatically and the LCD display will appear as in the
figure to the right. Press any button to turn the device back on when it
turns itself o.