User Manual

ENGLISH
Troubleshooting 37
18. TROUBLESHOOTING
Problem Category Problem Description/
Error
Solution
No response / Automatic
reset after insulator is
pulled out
Are the batteries
drained?
Are the batteries
installed according to
the wrong polarity?
Change for a new
battery or remove
battery and reinsert
correctly
The measured
temperature is lower
than 34.0°C/93.2°F or
higher than
42.9°C/109.3°F. Please
check the operation
method
Follow user manual for
proper measurement
Hardware problem Contact Motorola
customer service or your
local store
Operating temperature is
out of the range
Use the thermometer in
the prescribed range of
operating conditions
The sensor temperature
has not been stabilized
Wait about 10 seconds
and take a measurement
again