QUICK START GUIDE UK EN For a full explanation of all features and instructions, please refer to the User’s Guide (available for download from www.motorolastore.com). 1. Contents Inside Box MODEL: MBP944CONNECT X2 Baby Unit (Camera) Stand Parent Unit Power Adapters (Cot Mount Kit / Baby Unit and Parent Unit) Quick Start Guide Top Pole Cot Mounting Kit WARNING: Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1m (3ft) away).
. Setting up MBP944CONNECT Step 1: Fasten the round adaptive plate on to the screw thread of the cot mount stand. (see note) Step 2: Place the mount stand against the cot with the screw thread going through the cot bars. Step 3: Secure the mounting knob on to the screw thread. Step 4: Keep the stand parallel and tighten the mounting knob so that the cot mount stand is secured to the cot bars. Note: Only use the adaptive plate if the top rail of your cot is too thick for the bracket.
Step 5: Extend the telescopic leg of the cot stand so the foot is secured to the floor. Step 6: Tighten the securing knob to lock the telescopic leg in place. Note: Ensure the telescopic leg is extended so the foot sits tight against the floor. Step 7: Insert the Top Pole (with night light ring) into the cot mount stand. It will lock into place with a 'click'. Step 8: Dock the baby unit into the top pole (with night light ring) as shown in the picture below.
Step 9: Plug the Power Adapter (DC5V/1.5A) into the socket on Cot Mount Stand and the other end to a suitable electrical outlet. Step 10: Connect the DC plug of the power adapter(DC5V/1.5A) to the Parent Unit and the other end to a suitable electrical outlet. Press and hold the POWER button on the top of the Parent Unit to turn it ON. Note: When your child is older the baby unit (camera) can be removed and used without the cot mounting kit. This is 'Desk Mode'.
3. Parent Unit menu icons Signal Level Indication (5 Levels). Night Vision Mode (Video also changes to Black/White). T Talk Mode On. Indicates the screen off timer is set. Volume Level Control (8 Levels). No Baby Unit detected. Sleep activity monitoring. Battery Level Indication (4 Levels). Night light is ON Night Light Brightness Control with 3 levels of selection Night Light Colour Control with 7 colour options Night Light Colour Loop with 7 colours Zoom Level Control (1X, 2X).
4. Basic operation of the keys Parent Unit ON/OFF button Press and hold to switch on/off the parent unit. Press to turn the LCD screen ON/OFF. Volume Down/Up buttons Press -/+ to select volume level of the parent unit. SLEEP button Press to review the sleep activity of your baby that recorded from Camera. T TALK button Press and hold to talk to your baby. +- UP/DOWN buttons Press to adjust menu settings. M MENU Press to open menu options or exit the menu.
5. Setting up the Baby Unit for Wi-Fi® internet viewing A. After the Baby Unit docked on the top pole (with Night Light ring) then connect the small plug of the power adapter to the socket at the end of the Cot Mount Stand and the other end to the electrical outlet. Ensure the Power ON/OFF switch is "ON" position. B. Install Hubble for Motorola Monitors App on your Android™ Devices / iPhone®/ iPad®.
6. General Information If your product is not working properly, read this Quick Start Guide or the User’s Guide. Contact Customer Service: +44 (0) 844 557 0890 (UK only)* +44 (0) 8187 62092 (ROI) (*Calls cost 7p per minute plus your telephone company's access charge) Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE").
What Other Limitations Are There? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Exclusions Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this Warranty. Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.
How to Obtain Warranty Service or Other Information? To obtain service or information, please call: +44 (0) 844 557 0890 (UK only)* +44 (0) 8187 62092 (ROI) (*Calls cost 7p per minute plus your telephone company's access charge) You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a BINATONE Authorised Repair centre.
EU Declaration of Conformity (DoC) Hereby, Binatone Telecom PLC declares that the radio equipment type is in compliance with RE Directive 2014/53/EU.The full text of the EU declaration of conformity is available on the website : www.motorolastore.com/support. Download User Guide from website: www.motorolastore.com Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product.