User’s Guide Motorola Halo+ Over-the-Cot Wi-Fi® monitor and sleep companion Model: MBP994CONNECT The features described in this User’s Guide are subject to modifications without prior notice.
Welcome... ENGLISH to your new Motorola Halo+! Thank you for purchasing Motorola Halo+. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their play room. Please keep your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of Crib Mounting Kit and Baby Unit Crib Mounting Kit 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Night Light Ring Baby Unit Baby Unit Release Button Lightshow Projector ON/OFF/ Pair Night Light Switch Light Show Projector window Top Pole Release Button Securing Knob Telescopic Leg Mounting Knob Adjustive Plate Power Port 4 5 6 1 2 3 Baby Unit 7 13 14 15 16 17 18 19 10 11 20 13. High Sense Microphone 14. Photo Sensor (Night Vision 15. 16. 17. 18. 19. 20.
Overview of the Parent Unit 4. 5. 6. 7. 8. 9. 10. 11. 12. 16 20 17 2 7 3 8 4 9 5 10 6 11 Display (LCD screen) Sleep Activity button TALK button T Press and hold to speak to your baby. RESET button (recessed use small pin) UP button + Move Up menu options. DOWN button Move Down menu options. MENU button M Press to open / close the Menu options. OK button O Power Socket LEFT button < Move Left along menu options. RIGHT button > Move Right along menu options.
Parent Unit menu icons Signal Level Indication (4 Levels) Night Vision Mode (Video also changes to Black/White) Talk Mode On ENGLISH T Indicates the screen off timer is set Volume Level Control (8 Levels) No Baby Unit detected Sleep activity monitoring.
Table of contents 1. 2. Safety Instructions ................................................................................8 Getting Started ..................................................................................... 11 2.1 Setting up the Baby Unit with Cot Mount Kit ..........................11 2.2 Setting Up Baby Unit at Desk Mode ...........................................14 2.3 Parent Unit Power Supply ..............................................................15 2.
6. 7. 8. 9. 10. Getting Started - Connecting Devices ......................................27 5.2.1 Setup .......................................................................................27 5.3 User Account and Camera Setup on Android™ Devices ...28 5.3.1 Download Hubble for Motorola Monitors App .......28 5.3.2 Create a new Hubble for Motorola Monitors account ................................................................................. 29 5.3.3 Add the Camera to your account ...................
1. Safety Instructions WARNING: Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1m (3ft) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided. Stop using the cot mount when baby begins to push up on hands and knees.
• Adult assembly is required. Keep small parts away from children when assembling. • This product is not a toy. Do not allow children to play with it. • This Baby Monitor is not a substitute for responsible adult supervision. • Keep this User Guide for future reference. • Do not place the Baby Unit or cords in the cot or within reach of the baby (the unit and cords should be more than 1 metre (3 ft) away) • Keep the cords out of reach of children. • Do not cover the Baby Monitor with a towel or blanket.
CAUTION The Parent Unit includes a built-in, lithium-ion rechargeable battery pack, which is not a user-accessible item. If you think the battery needs replacing, please contact the helpline. Do not try to replace it yourself. Risk of explosion if battery is replaced by an unapproved battery type. Dispose of used batteries according to their instructions.
2.1 ENGLISH 2. Getting Started Setting up the Baby Unit with Cot Mount Kit Step 1: Fasten the round adaptive plate on the screw thread of the Cot Mount Stand (see note). Step 2: Place the mount stand against the cot with the screw thread going through the cot bars. Step 3: Secure the mounting knob on to the screw thread.
Step 4: Keep the stand parallel and tighten the mounting knob so that the cot mount stand is secured to the cot bars. Note: Only use the adaptive plate if the top rail of your cot is too thick for the bracket. Step 5: Extend the telescopic leg of the cot stand so the foot is secured to the floor. Step 6: Tighten the securing knob to lock the telescopic leg in place. Note: Ensure the telescopic leg is extended so the foot sits tight against the floor.
ENGLISH Step 7: Insert the Top Pole (with night light ring) into the cot mount stand. It will lock into place with a 'click'. Step 8: Dock the baby unit into the top pole (with night light ring) as shown in the picture below. Note: Before removing the camera from the top pole. Rotate the top pole outside the cot area to avoid the possibility of the camera falling into the cot. Step 9: Plug the Power Adapter (DC5V / 1.
2.2 Setting Up Baby Unit For Desk Mode When your child is older, the baby unit (camera) can be removed and used without the cot mounting kit. This is 'Desk Mode'. Connect the power supply directly into the Baby Unit (camera) when using in desk mode. 1. Connect the DC plug of the power adapter to the Baby Unit (camera) and the other end to a suitable mains power socket. NOTE Only use the enclosed Power Adapter (5V DC / 1500mA). 1.
1. Parent Unit Power Supply ENGLISH 2.3 Connect the DC plug of the power adapter (5V DC / 1500mA) to the Parent Unit and the other end to a suitable electrical outlet. Press and hold the POWER button on the top of the Parent Unit to turn it ON. NOTE A rechargeable battery (Lithium ion battery 2000mAh) inside the Parent Unit allows you to move it without losing the link and picture from the Baby Unit. The battery gives up to 5 hours operation for the Parent Unit.
2.4 Registration (Pairing) The Baby Monitor is pre-registered to your Parent Unit. You do not need to register it again unless the Baby Unit loses its link with the Parent Unit. To re-register your Baby Unit, or register a new Baby Unit, follow the procedures below: 1. 2. 3. 4. 5. Press the M button of the Parent Unit and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted, and the del/ add/ view/ scan menu + will pop up.
ENGLISH 3. Using the Motorola Halo+ Please read these instructions carefully and be aware that this product is only intended as an aid. It is not a substitute for responsible, correct parental supervision. 3.1 Set Night Light The nightlight feature provides a soft glow to help soothe your baby to sleep and help keep them calm throughout the night. Press button once to switch Night Light on, tap again to select 7 colour options. The light has 3 levels of brightness available. 3.2 Toggle 3.
3.7 Sleep activity monitor Press to review the sleep activity graph of your baby recorded by the camera. 3.8 Temperature Display (HH °C / °F or LL °C / °F) The temperature reading from the temperature sensor at the back of the Baby Unit will be displayed at the top of the LCD screen in °C or °F (see Section 4.7 “Temperature” for how to change). The readings will turn RED if the temperature goes above 29°C / 84°F or below 14°C / 57°F.
4.1 Set Night Light 1. Press the M button and the menu bar will pop up. 2. Tap on M button then Scroll Left/Right to select option at the menu bar. 3. Press + UP button or - DOWN button to select ON and OFF status then confirm with O button. 4.1.1 Night Light Brightness control • When ON is selected, you can scroll up/down to select and confirm with O button. There are 3 brightness levels for selection. • Press M to exit and confirm. 4.1.
4.3 LCD Display Brightness 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted. 3. Press the + UP button or - DOWN button to select the desired brightness from level 1 ~ 8. (The default brightness is level 4.) 4.4 Audio Playlist You can playback audio content - Lullabies, Soothing Sounds and Audio Book (English only) on the Baby Unit. The audio content can be downloaded and stored in the Baby Unit via Hubble App.
• Tap on M button then Scroll Left/Right to select option at the menu bar. • Scroll Up or Down to select or then confirm with O button. • Press + UP button or - DOWN button until "Press OK to stop playing" appears on screen then confirm with O button to stop. • Press M button to exit. 4.5 Alarm 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted. 3.
4.6 Camera Control 4.6.1 Add (pair) a camera 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted, and the del/ add/ view/ scan menu + will pop up. 3. Press the + UP button or - DOWN button to select add, + and press the O button to confirm. 4. Camera _ _ _ will pop up, press the + UP button or DOWN button to select the desired Camera, and press the O button to start searching for a camera unit.
1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is del/ add/ view/ scan menu highlighted, and the + will pop up. 3. Press the + UP button or - DOWN button to select view, and press the O button to confirm. 4. Camera _ _ _ will pop up. Press the + UP button or DOWN button to select the desired camera, and press the O button to view the picture from that camera. Note: Only camera locations with a * can be selected.
4.6.4 Scan cameras This function is only available when you have more than 1 Baby Unit (Camera). 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted, and the del/ add/ view/ scan menu + will pop up. 3. Press the + UP button or - DOWN button to select scan, and press the O button to confirm. 4. The screen will then display images from different registered cameras in a loop of Camera , changing _ _ _ approximately every 12 seconds.
View multiple cameras on screen This function is only available when you have more than 1 Baby Unit (Camera). When the Split Screen function is On, you can view multiple cameras on the screen, although only hear audio from one screen at a time. 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted. 3. Press the + UP button or - DOWN button to select Split Screen On / Off . 4.
5. Wi-Fi® Internet Viewing 5.1 Minimum System Requirements Web Portal • • • • • • • • Windows® 7 Mac OS® 10.7 Chrome™ 24 Internet Explorer® 9 Safari® 6 Java™ 7 Firefox® 18.0 Adobe® Flash® Player 15.0 Android™ System • Version 4.2 or above iPhone®/iPad® iOS • Version 7.0 or above High Speed (Wi-Fi®) Internet • At least 0.6 Mbps upload bandwidth per camera (you can test your internet speed on this site: http://www.speedtest.
Getting Started - Connecting Devices ENGLISH 5.2 How does it work? MBP944CONNECT Camera Wi-Fi Router Access your Camera View your Camera from any compatible device remotely. Hubble Service 5.2.1 Setup • Power on the Baby Unit (Camera). • The Camera Unit must be within range of the Wi-Fi® router with which you want to connect. Make sure that you have the password of the router for the setup process.
5.3 User Account and Camera Setup on Android™ Devices What you need • Baby Unit (Camera) • Cot Mounting Kit (for Dock mode only) • Power adapter • Device with Android™ system version 4.2 and above 5.3.1 Download Hubble for Motorola Monitors App • Go to Google Play™ Store to search for "Hubble for Motorola Monitors" or scan the QR code to download Hubble for Motorola Monitors App from Google Play™ Store. • Install Hubble for Motorola Monitors App on your Android™ device.
A1 A2 Note: If you already have an account, please tap LOGIN to go to the next step. Wi-Fi® Internet Viewing 29 ENGLISH • Ensure that your Android™ device is connected to your Wi-Fi® Router. • Run the "Hubble for Motorola Monitors" App on your Android™ device, tap SIGNUP to create new Hubble account (Picture A1). • Enter user’s information, read through the Terms and Conditions, by signing up you agree to our Terms and Conditions (Pictures A2). AndroidTM 5.3.
5.3.3 Add the Camera to your account • Sign in to your Hubble account by entering User Name and Password (Picture A3). • Tap on Add button at the bottom of the screen to add Camera (Picture A4). A3 A4 • Tap Halo Camera to add the Camera (Picture A5). • Choose the mode (Dock mode or Desk mode) you want to setup your Camera (Picture A6).
AndroidTM ENGLISH • Locate the PAIR button on the Cot Mounting Kit for Dock mode, press and hold the PAIR button until you hear “Ready for Pairing” voice prompt (Picture A7). • Or locate the PAIR button at the bottom of Camera for Desk mode, press and hold the PAIR button until you hear “Ready for Pairing” voice prompt (Picture A8).
• Tap Continue on the screen, your Android™ device will detect the Camera, this might take a minute, the Camera SSID will appear on your Android™ device (Picture A9). • Confirm by tapping the SSID and the Camera is detected successfully (Picture A10) A9 A10 • Tap NEXT to search Wi-Fi® network, select your Wi-Fi® network from the list and tap Search (Picture A11). • Enter Wi-Fi®password and tap OK (Picture A12).
ENGLISH AndroidTM • It will take a few minutes for the device to connect to the WiFi® network, the device is successfully registered to your Hubble for Motorola Monitors account (Picture A13) • The Camera can be used for Baby, Pet or Home monitoring, select one of purpose and name your Camera as reference (Picture A14). A13 A14 Note: If connection fails, please tap Retry and repeat the steps starting from 5.3.3.
5.4 User Account and Camera Setup on iPhone®/iPad® What you need • Baby Unit (Camera) • Cot Mounting Kit (for Dock mode only) • Power adapter • iPhone® / iPad® with iOS version 7.0 and above 5.4.1 Download Hubble for Motorola Monitors App • Go to App Store to search for "Hubble for Motorola Monitors". • Download "Hubble for Motorola Monitors" App and install it on your iPhone®/iPad®. • Or scan the QR code to download Hubble for Motorola Monitors from App store.
i1 i2 NOTE: If you already have an account, please tap LOGIN to go to the next step. Wi-Fi® Internet Viewing 35 ENGLISH • Ensure that your iOS® device is connected to your Wi-Fi® Router. • Run the "Hubble for Motorola Monitors" App on iPhone®/iPad®, tap SIGNUP to create new Hubble account (Picture i1). • Enter user’s information, read through the Terms and Conditions, by signing up you agree to our Terms and Conditions (Pictures i2). iOS® 5.4.
5.4.3 Add the Camera to your account • Sign in to your Hubble account by entering User Name and Password (Picture i3). • Tap on Add button at the bottom of the screen to add Camera (Picture i4) i3 i4 • Tap Halo Camera to add the Camera (Picture i5). • Choose the mode (Dock mode or Desk mode) you want to setup your Camera (Picture i6).
iOS® ENGLISH • Locate the PAIR button on the Cot Mounting Kit for Dock mode, press and hold the PAIR button until you hear “Ready for Pairing” voice prompt (Picture i7). • Or locate the PAIR button at the bottom of Camera for Desk mode, press and hold the PAIR button until you hear “Ready for Pairing” voice prompt (Picture i8).
• Tap Continue on the screen, your iOS®device is detecting the Camera, this might take a minute, the Camera SSID will appear on your iOS® device (Picture i9). • Confirm by tapping the SSID and the Camera is detected successfully (Picture i10) i9 i10 • Tap NEXT to search Wi-Fi® network, select your Wi-Fi® network from the list and tap Search (Picture i11). • Enter Wi-Fi® password and tap OK (Picture i12).
iOS® ENGLISH • It will take a few minutes for the device to connect to the Wi-Fi® network, the device is successfully registered to your Hubble for Motorola Monitors account (Picture i13) • The Camera can be used for Baby, Pet or Home monitoring, select one of purpose and name your Camera as reference (Picture i14) i13 i14 NOTE: If connection fails, please tap Retry and repeat the steps starting from 5.4.3.
5.5 Procedure for Resetting the Camera Note: If your Camera is moved from one router (e.g. home) to another (e.g. office) or you have Camera setup issues, then the Camera must be reset. Please reset the Camera with the following procedures: 1. Slide the ON/OFF switch to OFF. 2. Press and hold the PAIR button, then slide the ON/OFF switch to ON. 3. Release the PAIR button when you hear a confirmation beep and wait for the Camera Unit to complete an internal reset procedure.
ENGLISH 6. Disposal of the Device (Environment) At the end of the product life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point.
7. Cleaning Clean your Digital Video Baby Monitor with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the Digital Video Baby Monitor with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty. • Keep your Digital Video Baby Monitor away from hot, humid areas or strong sunlight, and do not let it get wet.
Display No display • Try recharging or replacing the battery pack. • Reset the Units. Disconnect the battery pack of the Parent Unit and unplug both the Units' electrical power, then plug them back in. • Is the Unit switched on? Press and hold the ON/OFF button 0 on the Parent Unit to switch it ON. • Is the correct camera selected? Change the camera number, if necessary. • Is the video display turned on? Press the VIDEO ON/OFF button V to turn it ON.
• Make sure there is at least 1 to 2m between the 2 Units to avoid audio feedback. • lf the Baby Unit is too far away, it may be out of range. Move the Baby Unit closer to the Parent Unit. • Make sure that the Baby and Parent Units are not near other electrical equipment, such as a television, computer or cordless/mobile telephone. • Use of other 2.4 GHz products, such as wireless networks (Wi-Fi® routers), Bluetooth™ systems, or microwave ovens, may cause interference with this product.
Category Problem Description / Error Solution Account I am unable to login Please check your user name and even after password. registration. Account I receive an error message saying: "Email ID is not registered". Please ensure that you have registered with us. Tap Create Account to create an account. Account What do I do if I forget my password? Click on the "Forgot Password" link on https:// app.hubbleconnected.com/ #lostpassword OR on your Android™ or iOS application.
Viewing Camera When I am in "remote mode", the video stops after 5 minutes. How do I view for longer? When you are accessing your Camera via a network different from your home network (over the internet) your video times out after 5 minutes. You can click on the Camera again from the Android™/iOS application to start streaming again. If you are accessing from your web-browser, then you can press on the Reload button to start viewing your Camera video stream again.
What is the significance of LED flashing? A flashing LED indicates the following status: Slow flashing: 1. Your Camera is in setup mode. You can add the Camera to your account in this mode. Out of the box, the Camera is in Setup mode. To reset to Setup mode, press and hold the PAIR button on the bottom of the Camera untill you hear a beep. Slow flashing: 2. The Camera is either connecting to the router or has lost the link to the router. Please ensure that the Camera is in the Wi-Fi® signal range.
Connectivity Even though I am Issues accessing my Camera from the same Wi-Fi® network, I still find my Camera is shown as remote. I can only access it for 5 minutes at a time. Please check your wireless router settings. For example, for Buffalo brand routers there is an option called Wireless Isolation. Please disable this option. Camera When I try to view the Camera, I get a prompt for Camera firmware upgrade. What should I do? Please upgrade your firmware. This takes around 5 minutes.
What is the meaning of "Local Camera" and "Remote Camera"? General How do I download Android™: the App for - Open the Google Play Store Android™ and iOS on your Android™ device.
Features How many users can If you are accessing in Local access the Camera Mode, two users are supported, at one time? after two users all streaming will go through the remote server. This allows for unlimited user access to a single Camera at one time. Connectivity I found interference Video streaming performance is Issues caused by my other related to internet bandwidth, webcam devices. especially if you have 2 or more video streaming devices that are working through the same router.
ENGLISH 9. General Information If your product is not working properly... 1. Read this User's Guide or the Quick Start Guide. 2. Visit our website: www.motorolastore.com 3. Contact Customer Service at +44 (0) 844 557 0890(UK only)* *Calls cost 7p per minute plus your telephone company's access charge +44 (0) 8187 62092 (ROI) To order a replacement battery pack for parent Unit, contact customer service.
Who is covered? This Warranty extends only to the first consumer purchaser, and is not transferable. What will BINATONE do? BINATONE or its authorised distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that do not conform to this Warranty. We may use functionally equivalent reconditioned/ refurbished/ preowned or new Products, Accessories or parts.
Consumer Accessories Consumer Products and Accessories that are Repaired or Replaced Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer. Exclusions Normal Wear and Tear.
Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services.
ENGLISH 10. Technical Specifications BABY UNIT Frequency WiFi 802.11b/g/n (2.4 GHz) FHSS GFSK 2.4 GHz - 2.48 GHz Operating Temperature 5oC - 45oC Maximum RF Power 20dBm Power Adapter Ten Pao International Ltd. S012BEB0500150 Input: 100-240V AC, 50/60Hz, 500mA; Output: 5.0V DC, 1500mA WARNING Use only with supplied power supply.
PARENT UNIT Frequency 2.4 GHz to 2.48 GHz Display 4.3" diagonal TFT LCD Operating Temperature 0oC - 45oC Maximum RF Power 20dBm Brightness Control 8 steps Volume Control 8 steps + Off Power Adapter Ten Pao International Ltd. S005ANB0500100 Input: 100-240V AC, 50/60Hz, 200mA; Output: 5.0V DC, 1000mA WARNING Use only with provided power supply. Battery (built-in) Lenovo Corporation (BL253) 3.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. Apple logo is trademark of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play and Android are trademarks of Google Inc. Wi-Fi is a trademark of the Wi-Fi Alliance.