Specifications

Quick Reference Guide 5
4. Ensure that the black rubber pad in the battery
compartment is lying flat along the bottom of the
compartment, with its smoother side facing up, and
the rubber “fingers” straddling the screw boss.
5. Ensure the wire latch is in the up position.
6. Place the battery, rounded side down, in the
compartment. Using a non-metallic tool (if necessary),
guide the battery cable connector into the female battery
connector on the mobile computer.
The connector is keyed so it only fits one way.
7. Press the connector down to ensure a positive
connection.
8. Place wire latch down until just below top of the screw
boss.
9. Place the battery cover onto the handle and slide it
as shown.
Wire Latch
Wire Latch
Screw Boss