Specifications

2 - 2 MC319Z RFID Mobile Computer Integrator Guide
5. On the mobile computer, navigate to the \Storage Card folder and tap the program STARTUPDLDR.EXE. The
update takes approximately 10 minutes. Do not remove AC power during this time.
6. Copy MCRFIDInstall.CAB into the \Storage Card folder on the mobile computer.
7. On the mobile computer, navigate to the \Storage Card folder and tap MCRFIDInstall.CAB. The device reboots
after the installation with RFID operational.
Updating Images via AirBEAM
Install the AirBEAM package files within 30XXw61RFIDABxxxxx.zip in sequence:
1. 30XXw61MenUPRXXXXX.apf
2. 30XXw61RFIDPkgXXXX.apf
30XXw61RFIDPkgXXXX.apf
executes silently and the mobile computer boots after installation, which takes
approximately 7-10 seconds. Refer to the MC3000 Integrator Guide for more information on AirBEAM.
Updating the RFID Firmware
The RFID_FLASH utility, used to update the RFID radio firmware, is no longer provided. For related issues, contact
Motorola Solutions support.