Specifications

MobileRFID Functionality 3 - 7
Configure RFID
RFID is in Server Mode by default. To configure RFID to operate in Client Mode:
1. Invoke the MobileRFID menu, then tap Configure RFID.
Figure 3-10 RFID Configuration Window
2. Select the Client Mode check box.
3. In the LLRP Port field, enter the port number on which the server waits for the RFID client to communicate. The
default is 5084.
4. In the Server IP field, enter the server IP for the remote host to which RFID communicates as a client.
5. Tap Apply.
6. Tap ok to close the window.