Specifications

Getting Started 1 - 3
Installing a microSD Card (MC55N0)
The microSD card slot provides secondary non-volatile storage. The slot is located under the battery. Refer to
the documentation provided with the card for more information, and follow the manufacturer’s
recommendations for use.
To install the microSD card:
1. Lift rubber access door.
Figure 1-3 Lift SIM Slot Holder Door
2. Slide the microSD card holder door to the right to unlock.
3. Lift microSD card holder door.
4. Insert the microSD card into card holder door ensuring that the card slides into the holding tabs on each
side of the door.
Figure 1-4 Insert microSD Card in Holder
5. Close the card holder door.
6. Slide to the left to lock into place.
7. Close rubber access door.
CAUTION Follow proper ESD precautions to avoid damaging the SD card. Proper ESD precautions include, but
are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.
Rubber access door
microSD card holder door
microSD card
Holding tab