Cell Phone User Manual

Accessories 6 - 9
Four Slot Battery Charger
This section describes how to use the Four Slot Battery Charger to charge up to four MC75 batteries.
MC75 Battery Shim Installation
Before charging a spare battery, snap the MC75 shim into the battery slot as shown in Figure 6-9.
Figure 6-9
MC75 Battery Shim Installation
Spare Battery Charging
1. Connect the charger to a power source.
2. Insert the spare battery into a spare battery charging well and gently press down on the battery to ensure
proper contact.
Shim
NOTE To purchase additional shims, contact your local account manager or Motorola, Inc. Part number:
KT-76490-01R.