Cell Phone User Manual

2 - 40 MC75 User Guide
Using IrDA
In a Microsoft Windows Mobile program (except Messaging), and Picture & Videos, you can exchange files using
either infrared or Bluetooth.
First activate the beam function before exchanging files with another IrDA device.
To activate the Beam function:
1. Ta p Start > Settings > Connections tab > Beam icon.
2. Ta p Receive all incoming beams check box.
Figure 2-27 Beam Window
3. Ta p ok.
Infrared Connection
Using infrared, you can enable short-range file exchange between your MC75 and another IrDA device.
Exchanging Files using IR Connection
Ensure that the IrDA function on both the MC75 and the other device are enabled.
To send files via IrDA connection:
1. Switch to the program where you created the item you want to send and locate the item in the list.
2. Align the IrDA port of the MC75 with that of the IrDA device so that they are unobstructed and within a close
range.
NOTE You can also beam files (not folders) from the File Explorer window. Tap and hold the item you want to
send, then tap
Beam File from the pop-up menu.
NOTE Do not cover or block the IrDA window.