Cell Phone User Manual

Using Bluetooth 4 - 17
2. Ensure that the Headset profile is enabled on the MC75. See Profiles Tab on page 4-32 for more information.
3. Use the Connection Wizard to search for a Bluetooth headset.
4. Select the device and tap Next.
5. Select the Headset service name and select Connect. The MC75 connects to the headset. Refer to the
headset user manual for instructions on communicating with a Bluetooth device.
6. Press the communication button on the headset. This routes both system and WAN call audio to the headset.
7. When a call is received on the MC75, tap the Accept button to answer the call.
8. Press the communication button on the headset to route the audio back to the MC75.
Hands-free Services
To connect to a Bluetooth headset:
1. Ensure the MC75 is discoverable and connectable. See Device Info Tab on page 4-23.
2. Ensure that the Hands Free profile is enabled on the MC75. See Profiles Tab on page 4-32 for more
information.
3. Use the Connection Wizard to search for a Bluetooth hands-free headset.
4. Select the hand-free device and tap Next.
5. Select the Hands-free service name and select Connect. The MC75 connects to the headset. Refer to the
headset user manual for instructions on communicating with a Bluetooth device.
6. During an active connection, the MC75 cannot go into suspend mode when the Power Button is pressed. A
message appears notifying the user.
Once the WAN call is disconnected (with Hands-free profile) the Power button is enabled.
NOTE When using a Bluetooth headset with Headset Services, you cannot accept or end a call from the headset.
You must accept or end a call on the MC75.
NOTE If a wired headset is connected to the MC75, the Bluetooth headset connection is disconnected.
NOTE Newer Bluetooth headsets are device dependant and remember the last device they connected to. If problems
occur while connecting to the headset, place the headset in discovery mode. Refer to the headset user manual
for more information.
Only WAN audio is routed to the headset. System audio is still emitted through the MC75 speaker.
You can accept calls and re-dial using the Hands-free profile.
Hands-free profile does not support 3-way calling.