Barcode Reader User Manual

7 - 2 MC9090-G RFID Integrator Guide Supplement
Accessories
The MC909X Integrator Guide, P/N: 72E-72216-xx provides the troubleshooting information applicable to the
following MC9090-G RFID mobile computer accessories:
Bluetooth Connection
Four Slot Charge Only Cradle
Four Slot Ethernet Cradle
Four Slot Spare Battery Charger
Single Slot Serial/USB Cradle
Cable Adapter Module
Magnetic Stripe Reader
Modem Module
Battery Safety Guidelines
The area in which the units are charged should be clear of debris and combustible materials or chemicals.
Particular care should be taken where the device is charged in a non-commercial environment.
Do not use incompatible batteries and chargers. For any questions about the compatibility of a battery or a
charger, contact Motorola Enterprise Mobility support. See Service Information on page i-xii for contact
information.
Do not crush, puncture, or place a high degree of pressure on the battery.
Severe impact from dropping any battery-operated device on a hard surface could cause the battery to
overheat.
Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or
near a radiator or other heat source. Do not place battery into a microwave oven or dryer.
Do not dispose of batteries in fire.
If battery or equipment is suspected, call Motorola Enterprise Mobility support to arrange for inspection. See
Service Information on page i-xii for contact information.