MC909X Mobile Computer User Guide
MC909X User Guide 72E-72215-04 Rev A March 2007
© 2005-7 by Motorola, Inc. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Motorola. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an “as is” basis.
Revision History Changes to the original manual are listed below: Change Date Description Rev A 11/1/05 Initial release. -02 Rev A 1/19/06 Add MC9090-K/S, MC9090-G and MC9094-K/S with Windows Mobile 5.0. -03 Rev A 3/21/06 Add MC9097 support. -04 Rev A 3/6/07 Add generic MC9097 information, 33-key keypad, Fusion 2.5 and AKU 3.2 update information.
Table of Contents Chapter 1 Table of Contents Patents........................................................................................................................... ii Revision History ............................................................................................................. iii About This Guide Introduction .................................................................................................................... v Documentation Set ...............................
vi MC909X User Guide Changing the Power Settings ....................................................................................... Changing the Display Backlight Settings ...................................................................... Changing the Keypad Backlight Settings ...................................................................... Turning Off the Radios .................................................................................................. On Devices with Mobile 5.
Table of Contents Imaging ................................................................................................................... 2-50 Scanning Considerations ........................................................................................ 2-51 Scanning Bar Codes ............................................................................................... 2-52 Scan LED Indicator .................................................................................................
viii MC909X User Guide Bluetooth Settings ......................................................................................................... Device Info Tab ....................................................................................................... Services Tab .......................................................................................................... Dial-Up Networking Service ..............................................................................
Table of Contents Activating Service ................................................................................................... 5-1 Phone Properties Page ........................................................................................... 5-1 Finding Your Phone Number and Walkie-Talkie Number ....................................... 5-1 Accessing the Phone Keypad ....................................................................................... 5-3 Turning the Phone On and Off .........
x MC909X User Guide Single Slot Serial/USB Cradle ...................................................................................... Battery Charging Indicators .................................................................................... Four Slot Ethernet Cradle ............................................................................................. Battery Charging Indicators ....................................................................................
Table of Contents Appendix B: Keypad Special Keys Introduction ................................................................................................................... B-1 Keypads ........................................................................................................................ B-1 Appendix C: Regulatory Introduction ...................................................................................................................
xii MC909X User Guide
About This Guide About This Guide Introduction This guide provides information about using the MC9090 family of mobile computers and accessories. NOTE Screens and windows pictured in this guide are samples and can differ from actual screens. Documentation Set The documentation set for the MC909X is divided into guides that provide information for specific user needs. • Microsoft Application Guide - describes how to use Microsoft developed applications.
vi MC909X User Guide Configurations This guide covers the following configurations: Configuration Radios Display Memory Data Capture Operating System Keypads MC9090-G WLAN: 802.11a/b/g WPAN: Bluetooth Color or monochrome 64 MB RAM or 128 MB RAM/ 64 MB Flash Laser, Long Range Laser, or Imager Windows CE 5.0 28-key, 43-key, 53-key, VT, 3270, 5250 Emulators MC9090-G WLAN: 802.
About This Guide vii AKU Version for Mobile 5.0 Devices To determine the Adaptation Kit Update (AKU) version on a Mobile 5.0 device: Tap Start > Settings > System tab > About icon > Version tab. The second line lists the operating system version and the build number. The last part of the build number represents the AKU number. For example, Build 14929.2.2.1 indicates that the device is running AKU version 2.2.1. OEM Version on Mobile 5.0 Devices To determine the OEM software version on a Mobile 5.
viii MC909X User Guide BTExplorer Software To determine the BTExplorer software version on a Mobile 5.0 or Windows CE 5.0 device: Tap BTExplorer icon > Show BTExplorer> File > About. Fusion Software To determine the Fusion software version on a Mobile 5.0 or Windows CE 5.0 device: Tap Wireless Strength icon > Wireless Status > Versions.
About This Guide ix Phone Software To determine the Phone software version on a Mobile 5.0 device: Tap Start > Phone > Menu > Options > Version Information tab. MC9094 MC9097 Chapter Descriptions Topics covered in this guide are as follows: • Chapter 1, Getting Started, provides information on getting the mobile computer up and running for the first time. • Chapter 2, Operating the MC909X, explains how to use the mobile computer.
x MC909X User Guide Notational Conventions The following conventions are used in this document: • “Mobile computer” refers to the Symbol MC909X series of hand-held computers.
About This Guide xi For the latest version of this guide and all guides, go to: http://support.symbol.com. Service Information If you have a problem with your equipment, contact the “Symbol Global Interactive Center,” for your region. Go to http://www.symbol.com/contactsupport. If you purchased your Symbol product from a Symbol Business Partner, contact that Business Partner for service. Before contacting, have the model number and serial number at hand.
xii MC909X User Guide
Getting Started Chapter 1 Chapter 1 Chapter 1 Getting Started Introduction This chapter lists the accessories for the mobile computer and explains how to install and charge the batteries, replace the strap and start the mobile computer for the first time. Indicator LED Bar Touch Screen Microphone (Windows Mobile 5.0 only) Scan Button Keypad Headphone Jack (Windows Mobile 5.
1-2 MC909X User Guide Microphone Touch Screen Indicator LED Bar Power Scan Button Scan Button or Walkie-Talkie Button on MC9097-K Keypad Battery Release Latch Exit Window Exit Window Headphone Jack Stylus Scan Button Scan Button Scan Button (MC9094-K) Walkie-Talkie Button (MC9097-K) Stylus Strap SIM Door MC9090-K Figure 1-2 MC909X-K MC9094-K MC9097-K
Getting Started Microphone 1-3 Touch Screen Indicator LED Bar Power Button Scan Button Scan Button or Walkie-Talkie Button on MC9097-S Keypad Exit Window Exit Window Headphone Jack Stylus Scan Button Scan Button Scan Button (MC9094-S) Walkie-Talkie Button (MC9097-S) Strap Stylus SIM Door Battery Release Latch MC9090-S Figure 1-3 MC909X-S MC9094-S MC9097-S
1-4 MC909X User Guide Unpacking the Mobile Computer Carefully remove all protective material from around the mobile computer and save the shipping container for later storage and shipping. Verify that you received all equipment listed below: • mobile computer • lithium-ion battery • strap, attached to the mobile computer • stylus, in the stylus silo • Regulatory Guide • Quick Start Guide (poster). Inspect the equipment for damage.
Getting Started 1-5 Table 1-1 MC909X Accessories Accessory Description Modem Module Enables data communication between the mobile computer and a host computer, remotely through the phone lines, and synchronizes information between the mobile computer and a host computer. Storage Card Provides secondary non-volatile storage. Single Slot Serial/USB Cradle Charges the mobile computer main battery and a spare battery.
1-6 MC909X User Guide Installing and Removing the Main Battery Installing the Main Battery Before using the mobile computer, install a lithium-ion battery by sliding the battery into the mobile computer as shown in Figure 1-4. NOTE Ensure the battery is fully inserted. Two audible clicks can be heard as the battery is fully inserted. A partially inserted battery may result in unintentional data loss.
Getting Started 1-7 When the main battery reaches a very low battery state, the combination of main battery and backup battery retains data in memory for at least 72 hours. NOTE Do not remove the main battery within the first 15 hours of use. If the main battery is removed before the backup battery is fully charged, data may be lost.
1-8 MC909X User Guide Table 1-2 Mobile Computer LED Charge Indicators (Continued) LED Indication Fast Blinking Amber Error in charging; check placement of the mobile computer. Slow Blinking Amber Mobile computer is charging. Solid Amber Charging complete. Note: When the battery is initially inserted in the mobile computer, the amber LED flashes once if the battery power is low or the battery is not fully inserted.
Getting Started 1-9 Primary Battery Releases Secondary Battery Release 2 1 1 3 Figure 1-5 Removing the Main Battery - MC909X-G/K Primary Battery Release Secondary Battery Release Figure 1-6 Removing the Main Battery - MC909X-S Starting the Mobile Computer Press the red Power button to turn on the mobile computer. If the mobile computer does not power on, perform a cold boot. See Resetting the Mobile Computer on page 2-53.
1 - 10 MC909X User Guide MC9090/4 MC9097 Figure 1-7 Symbol Splash Window Calibrating the Screen To calibrate the screen so the cursor on the touch screen aligns with the tip of the stylus: Using the stylus carefully press and briefly hold the tip of stylus on the center of each target that appears on the screen. 1. NOTE To re-calibrate the screen at anytime, press FUNC + ESC on the mobile computer to launch the calibration screen application.
Getting Started 1 - 11 SIM Card NOTE Subscriber Identification Module (SIM) card is only used in the MC9094 and MC9097 configurations. The SIM card, or smart card, is required for MC9094 (GPRS) phone service and must be obtained from the phone service provider. The MC9097 (iDEN) comes from the factory with an un-activated SIM card installed. You must contact your service provider to activate the SIM card. NOTE On the MC9097, it is not recommended that you swap the SIM card with another SIM card.
1 - 12 MC909X User Guide SIM Holder Figure 1-9 Unlock SIM Case 5. Insert the SIM card, as shown in Figure 1-10, with the cut edge of the card facing out and the contacts facing down. 6. Lower the SIM holder. Figure 1-10 Inserting the SIM Card 7. Lock the metal clip by sliding it to the closed position. Figure 1-11 Locking the SIM Card Housing 8. Replace the SIM housing cover with one screw.
Getting Started 1 - 13 Figure 1-12 Replacing the SIM Door Press the red POWER button. 9. NOTE On the MC9097, it is not recommended that you swap the SIM card with another SIM card. If you do swap SIM cards, perform step 10. 10. On the MC9097, you must preform a master rest after installing a new SIM Card. a. Tap Start > Phone > Menu > Options > Error Log tab. b. Tap the Master Reset button. c. Tap OK. d. Once an “X” appears in the Phone Antenna icon (wait a few seconds), perform a warm boot.
1 - 14 MC909X User Guide MC9090-G Strap The strap may be moved to either the left or right side of the mobile computer to suit user preferences. To reposition the strap: 1. Disconnect the metal clip at the handle. 2. Open strap loop and slide the handstrap through the loop. 3. Slide the loop out of the connector post. 4. Reverse the procedure to re-attach the strap. Two strap connectors are provided on the mobile computer’s main body. The handstrap may be attached to either connector.
Getting Started 1 - 15 MC909X-K Strap The strap may be moved to either the left or right side of the mobile computer to suit user preferences. To reposition the MC909X-K strap: 1. Lift the loop end of the strap over the button. Loop Button Connection Post Figure 1-14 Repositioning the MC909X-K Strap 2. Pull the loop through the connection post. 3. Remove the battery. 4. Insert the loop into the opposite connection post. 5. Place the loop over the button and pull taught. 6. Replace the battery.
1 - 16 MC909X User Guide Screws Strap Bracket Figure 1-15 Remove Strap Bracket 2. Lift the loop end of the strap over the button. 3. Pull the loop through the connection post. 4. Remove the battery. 5. Reverse the procedure to re-attach the strap.
Getting Started 1 - 17 MC909X-S Strap The strap may be moved to either the left or right side of the mobile computer to suit user preferences. To reposition the MC909X-S strap, attach the MC909X-S strap to either the left or right side of the mobile computer to suit user preferences. To reposition the strap: 1. Remove the screw securing the bottom of the strap to the device. 2. Position the bottom end of the strap over the opposite screw hole. 3. Secure the strap to the device.
1 - 18 MC909X User Guide Battery Management Battery Saving Tips • Leave the mobile computer connected to AC power at all times when not in use. • Set the mobile computer to turn off after a short period of non-use. • Set the display and keyboard backlight to turn off after a short period of non-use. • Turn off all wireless radio activity when not in use. • Power off the mobile computer when charging to charge at a faster rate.
Getting Started 1 - 19 Changing the Keypad Backlight Settings To change the keypad backlight settings in order to conserve more battery power: 1. On devices with Windows CE 5.0, tap Start > Settings > Control Panel > Keylight icon > Battery Power tab. or On devices with Windows Mobile 5.0, tap Start > Settings > System tab > Keylight icon > Battery Power tab. 2. Select the On battery power: Disable keylight if not used for: check box and select a value from the drop-down list box. 3.
1 - 20 MC909X User Guide To turn on the Bluetooth and WWAN radios, tap the Connectivity icon (on non-WWAN devices) or the Antenna/Signal icon (on WWAN devices) and select Turn Off Flight Mode. NOTE On the MC9097, wait 20 to 40 seconds for the radio to power on. During this time do not suspend the mobile computer or remove the battery. If the mobile computer is suspended or the battery is removed, warm boot the mobile computer. On Devices with Mobile 5.0 AKU 2.
Getting Started 1 - 21 To enable or disable all wireless connections, tap and hold the All bar. To configure settings for a connection, tap Menu. Figure 1-21 Wireless Manager Menu On Device with CE 5.0 (OEM Version 01.15 and lower) NOTE To determine the operating system OEM version, see Configurations on page vi. WLAN Radio To turn off the WLAN radio: 1. Tap Start > Settings > Control Panel > Power icon > PwrDevices tab. 2. In the text box, scroll down until WLP1: displays. 3. Select WLP1:.
1 - 22 MC909X User Guide Bluetooth Icon Figure 1-22 Bluetooth Icon To turn on the Bluetooth radio, tap Bluetooth icon in the task tray and select Enable Bluetooth. On Device with CE 5.0 (OEM Version 01.16 and higher) NOTE To determine the operating system OEM version, see Configurations on page vi. WLAN Radio To turn off the WLAN radio tap the Wireless Connection Status icon on the task tray and select Disable Radio. A red X appears across the icon indicating that the radio is disabled (off).
Operating the MC909X Chapter 2 Chapter 2 Chapter 2 Operating the MC909X Introduction This chapter explains the physical buttons, status icons and controls on the mobile computer, how to use the mobile computer, including instructions for powering on and resetting the mobile computer, using the stylus and a headset, entering information and scanning. Status Icons (Windows CE 5.0) The Taskbar at the bottom of the window displays the active programs, current time, battery status and communication status.
2-2 MC909X User Guide Table 2-1 Status Icons (Continued) Status Icon Description This icon indicates that the main battery is charging or that the terminal is operating on AC power. Double tapping on this icon opens the Power Properties window. Indicates that the battery is fully charged and the mobile computer is running on external power. This icon is displayed when the memory backup battery level is low. Charge the battery. This icon indicates that the battery is fully charged (100% charged).
Operating the MC909X 2-3 Status Icons (Windows Mobile 5.0) Status Bar The Status Bar at the top of the window displays the current time, battery status and communication status. Status Icons Start Button Volume Icon Date/Time Figure 2-2 Status Bar Status icons are shown in the Status Bar to indicate present status of the mobile computer. Tapping each status icon displays the corresponding dialog box and enables you to change or adjust its settings.
2-4 MC909X User Guide Table 2-2 Status Icons (Continued) Icon Function WWAN Description Call missed. Voice call. Voice call in progress. Data call in progress. Calls are forwarded. Call on hold. Antenna/signal icon: wireless on/good signal. Antenna/signal icon: wireless off. Antenna/signal icon: no service or searching. Antenna/signal icon: lost signal. Antenna/signal icon: no signal. Roaming icon. Outside of your home area. Missing SIM Card icon: SIM Card not installed or installed improperly.
Operating the MC909X 2-5 Table 2-3 Command Bar Icons Icon Description Wireless connection status icon. Indicates WLAN signal strength and opens the Wireless Applications menu. The Bluetooth Enabled icon appears in the task tray and indicates that the Bluetooth radio is on. The Bluetooth Disabled icon appears in the task tray and indicates that the Bluetooth radio is off.
2-6 MC909X User Guide NOTE Use can also adjust the system volume using the Sounds & Notifications window or by pressing the Blue key and 6 or the Blue key and 7. Battery Icon In AKU 2.2.1 and lower, the Battery icons display on the Title Bar when the main battery or backup battery power falls below a predetermined level. A Battery dialog box also appears indicating the status of the main or backup battery. Figure 2-5 Battery Status Dialog Box AKU 3.
Operating the MC909X 2-7 Figure 2-7 Connectivity Dialog Box Time Icon NOTE In AKU 2.2 and higher, the Time icon only appears in the Title Bar when an application displays. It does not appear it the Title Bar when the Today screen displays. The Time icon displays the current time in a digital or analog format. To change the time format, tap and hold the Time icon until a menu appears. Select the format you want.
2-8 MC909X User Guide E-Mail Icon The E-Mail icon notifies you when you have received incoming e-mails. Figure 2-11 New E-mail Messages Dialog Box Multiple Notification Icon The Multiple Notification icon appears when two or more message notifications occur. Tap the icon to display the multiple notification icons. Figure 2-12 Multiple Notifications Icon Locking the Mobile Computer (Windows Mobile 5.0 Only) Use the Device Lock feature to prevent use of the device.
Operating the MC909X 2-9 Figure 2-14 Unlock Device Window Tap Unlock on the Unlock Device window. LED Indicators The MC909X has an LED Indicator Bar that contains LEDs that indicate scanning and charging status. Table 2-4 describes the LED indications. LED Indicator Bar Figure 2-15 MC909X LEDs Indicator Bar Table 2-4 Mobile Computer LED Indications LED State Indication Solid Red Laser enabled, scanning/imaging in process. Solid Green Successful decode/capture.
2 - 10 MC909X User Guide Keypads The mobile computer has the following interchangeable modular keypads: • 28-key keypad (MC909X-K and MC9090-G only) • 28-key keypad (MC909X-S only) • 33-key keypad (MC909X-K only) • 38-key numeric/function keypad (MC909X-S only) • 38-key alpha/shifted numeric keypad (MC909X-S only). • 43-key keypad (MC909X-K and MC9090-G only) • 53-key keypad (MC909X-K and MC9090-G only) • 3270 Emulator (MC9090-G only) • 5250 Emulator (MC9090-G only) • VT Emulator.
Operating the MC909X 2 - 11 28-Key Keypad for MC909X-G/K The 28-key keypad contains a Power button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described. See Table 2-5 on page 2-13 for key and button descriptions and Table 2-14 on page 2-47 for the keypad’s special functions.
2 - 12 MC909X User Guide 28-Key Keypad for MC909X-S The 28-key keypad contains a Power button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described. See Table 2-5 on page 2-13 for key and button descriptions and Table 2-14 on page 2-47 for the keypad’s special functions.
Operating the MC909X 2 - 13 Table 2-5 28-Key Descriptions Key Description Power (red) Turns the mobile computer on and off. Performs a warm boot when held down for five seconds. See Windows Mobile 5.0 Devices on page 2-54 for information about performing a warn boot. Green/Red Dot MC9094 and MC9097: Green dot: press to display the phone keypad window or to dial a phone number (from the phone keypad window). Red dot: press on phone keypad window to stop dialing or end a call.
2 - 14 MC909X User Guide Table 2-5 28-Key Descriptions (Continued) Key Description Alphanumeric GHI JKL MN O 4 5 6 In default state, produces the numeric value on the key. In Alpha state, produces the lower case alphabetic characters on the key. Each key press produces the next alphabetic character in sequence.
Operating the MC909X 2 - 15 Table 2-5 28-Key Descriptions (Continued) Key ENT (Enter) Description Executes a selected item or function. For Windows Mobile 5.0: The default behavior of the ENT (Enter) key sends an extra character, which causes a Microsoft Word or Notes application to exit.
2 - 16 MC909X User Guide 33-Key Numeric/Function Keypad for MC909X-K The 33-key numeric/function keypad contains a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values and the alternate alpha key (orange) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described.
Operating the MC909X 2 - 17 Table 2-6 33-Key Keypad Descriptions Key Description Power (red) Turns the mobile computer on and off. Performs a warm boot and a cold boot. See Windows Mobile 5.0 Devices on page 2-54 for information about performing a warm and cold boot. Green/Red Dot MC9094 and MC9097: Green dot: press to display the phone keypad window or to dial a phone number (from the phone keypad window). Red dot: press on phone keypad window to stop dialing or end a call.
2 - 18 MC909X User Guide Table 2-6 33-Key Keypad Descriptions (Continued) Key Description Alphanumeric In default state, produces the numeric value on the key. In Alpha state, produces the lower case alphabetic characters on the key. Each key press produces the next alphabetic character in sequence. For example, press and release the ALPHA key and then press the ‘4’ key once to produce the letter ‘r’; press and release the ALPHA key and then press the ‘6’ key three times to produce the letter ‘r’.
Operating the MC909X 2 - 19 Table 2-6 33-Key Keypad Descriptions (Continued) Key Description Period/Decimal Point Produces a decimal point for numeric entries. Produces a period for alpha entries when the ALPHA function key is activated. HOME Moves the cursor to the beginning of a line. ENTER Executes a selected item or function. For Windows Mobile 5.0: The default behavior of the ENTER key sends an extra character, which causes a Microsoft Word or Notes application to exit.
2 - 20 MC909X User Guide 38-Key Numeric/Function Keypad for MC909X-S The 38-key numeric/function keypad contains a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values and the alternate alpha key (orange) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described.
Operating the MC909X 2 - 21 Table 2-7 38-Key Numeric/Function for MC909X-S Keypad Descriptions Key Description Power (red) Turns the mobile computer on and off. Performs a warm boot when held down for 5 seconds. See Windows Mobile 5.0 Devices on page 2-54 for information about performing a warn boot. Green/Red Dot MC9094 and MC9097: Green dot: press to display the phone keypad window or to dial a phone number (from the phone keypad window).
2 - 22 MC909X User Guide Table 2-7 38-Key Numeric/Function for MC909X-S Keypad Descriptions (Continued) Key Description Alpha-lock (orange) LED Function (blue) Press and release the orange alpha-lock key to activate the keypad alternate alpha-lock functions (shown on the keypad in orange). The LED above the key lights and the icon appears at the bottom of the screen. Press and release the orange alpha-lock key again to return to the default keypad functions.
Operating the MC909X 2 - 23 Table 2-7 38-Key Numeric/Function for MC909X-S Keypad Descriptions (Continued) Key Description Star In default state, produces an asterisk. Use with the orange alpha-lock key for alpha character value. ENT (Enter) Executes a selected item or function. The default behavior of the ENT (Enter) key sends an extra character, which causes a Microsoft Word or Notes application to exit.
2 - 24 MC909X User Guide 38-Key Alpha/Shifted Numeric Keypad for MC909X-S The 38-key alpha/shifted numeric keypad contains a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values and the alternate numeric key (orange) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described.
Operating the MC909X 2 - 25 Table 2-8 38-Key Alpha/Shifted Numeric for MC909X-S Keypad Descriptions Key Description Power (red) Turns the mobile computer on and off. Performs a warm boot and a cold boot. See Windows Mobile 5.0 Devices on page 2-54 for information about performing a warn and cold boot. Green/Red Dot MC9094 and MC9097: Green dot: press to display the phone keypad window or to dial a phone number (from the phone keypad window).
2 - 26 MC909X User Guide Table 2-8 38-Key Alpha/Shifted Numeric for MC909X-S Keypad Descriptions (Continued) Key Description SPACE In default state, produces a space function. Use with the orange num-lock key for the backspace function. Num-lock (orange) Press and release the orange num-lock key to activate the keypad alternate num-lock functions (shown on the keypad in orange). The LED above the key lights LED Function (blue) LED and the icon appears at the bottom of the screen.
Operating the MC909X 2 - 27 43-Key Keypad for MC909X-G/K The 43-key keypad contains a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values and the alternate ALPHA key (orange) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described.
2 - 28 MC909X User Guide Table 2-9 43-Key Keypad Descriptions Key Description Power (red) Turns the mobile computer on and off. Performs a warm boot and a cold boot. See Windows Mobile 5.0 Devices on page 2-54 for information about performing a warn and cold boot. Green/Red Dot MC9094 and MC9097: Green dot: press to display the phone keypad window or to dial a phone number (from the phone keypad window). Red dot: press on phone keypad window to stop dialing or end a call.
Operating the MC909X 2 - 29 Table 2-9 43-Key Keypad Descriptions (Continued) Key Description Alpha/Application These keys can have an application assigned to the function value and have an alpha value assigned when used with the ALPHA function key. On Windows Mobile 5.0 devices: F6 and F7 keys cannot be remapped and are dedicated by the Operating System to control volume level. When these keys are pressed, Shell.exe traps them and displays the volume adjustment window.
2 - 30 MC909X User Guide Table 2-9 43-Key Keypad Descriptions (Continued) Key Description Star Produces an asterisk and the alphabetic character Z when the ALPHA function key is activated. Enter Executes a selected item or function. For Windows Mobile 5.0: The default behavior of the ENT (Enter) key sends an extra character, which causes a Microsoft Word or Notes application to exit.
Operating the MC909X 2 - 31 53-Key Keypad for MC909X-G/K There are two physical configurations of the 53-key keypad, however both of the keypads are functionally identical. The 53-key keypad contains a Power button, application keys, scroll keys and function keys. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described.
2 - 32 MC909X User Guide Table 2-10 53-Key Descriptions Key Description Power (red) Turns the mobile computer on and off. Performs a warm boot and a cold boot. See Windows Mobile 5.0 Devices on page 2-54 for information about performing a warn and cold boot. Green/Red Dot MC9094 and MC9097: Green dot: press to display the phone keypad window or to dial a phone number (from the phone keypad window). Red dot: press on phone keypad window to stop dialing or end a call.
Operating the MC909X 2 - 33 Table 2-10 53-Key Descriptions (Continued) Key Description Numeric/Application Numeric value keys - can have applications assigned with function key(s). For Windows Mobile 5.0 devices: F6 and F7 keys cannot be remapped and are dedicated by the Operating System to control volume level. When these keys are pressed, Shell.exe traps them and displays the volume adjustment window.
2 - 34 MC909X User Guide Table 2-10 53-Key Descriptions (Continued) Key Description Star Produces an asterisk. Enter Executes a selected item or function. For Windows Mobile 5.0 devices: The default behavior of the ENT (Enter) key sends an extra character, which causes a Microsoft Word or Notes application to exit.
Operating the MC909X 2 - 35 3270 Emulator Keypad for MC909X-G/K There are two physical configurations of the 3270 emulator keypad, however both of the keypads are functionally identical. The 3270 emulator keypad contains a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described.
2 - 36 MC909X User Guide Table 2-11 3270 Emulator Descriptions Key Description Power (red) Turns the mobile computer on and off. Performs a warm boot and a cold boot. See Windows Mobile 5.0 Devices on page 2-54 for information about performing a warn and cold boot. Green/Red Dot To use a key as an application key (APP key) on the keyboard, a new keyboard remap table must be created and installed. However, the Green/Red dot keys can be remapped as APP keys through the registry.
Operating the MC909X 2 - 37 Table 2-11 3270 Emulator Descriptions (Continued) Key Description Application These keys can be assigned to an application. On Windows Mobile 5.0 devices: F6 and F7 keys cannot be remapped and are dedicated by the Operating System to control volume level. When these keys are pressed, Shell.exe traps them and displays the volume adjustment window.
2 - 38 MC909X User Guide Table 2-11 3270 Emulator Descriptions (Continued) Key Description Star Produces an asterisk. Enter Executes a selected item or function. For Windows Mobile 5.0: The default behavior of the ENT (Enter) key sends an extra character, which causes a Microsoft Word or Notes application to exit.
Operating the MC909X 2 - 39 5250 Emulator Keypad for MC909X-G/K There are two physical configurations of the 5250 emulator keypad, however both of the keypads are functionally identical. The 5250 emulator keypad contains a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described.
2 - 40 MC909X User Guide Table 2-12 5250 Emulator Descriptions Key Description Power (red) Turns the mobile computer on and off. Performs a warm boot and a cold boot. See Windows Mobile 5.0 Devices on page 2-54 for information about performing a warn and cold boot. Green/Red Dot To use a key as an application key (APP key) on the keyboard, a new keyboard remap table must be created and installed. However, the Green/Red dot keys can be remapped as APP keys through the registry.
Operating the MC909X 2 - 41 Table 2-12 5250 Emulator Descriptions (Continued) Key Description Application These keys can be assigned to an application. On Windows Mobile 5.0 devices: F6 and F7 keys cannot be remapped and are dedicated by the Operating System to control volume level. When these keys are pressed, Shell.exe traps them and displays the volume adjustment window.
2 - 42 MC909X User Guide Table 2-12 5250 Emulator Descriptions (Continued) Key Description Star Produces an asterisk. Enter Executes a selected item or function. For Windows Mobile 5.0: The default behavior of the Enter key sends an extra character, which causes a Microsoft Word or Notes application to exit.
Operating the MC909X 2 - 43 VT Emulator Keypad The VT emulator keypad contains a Power button, application keys, scroll keys and a function key. The keypad is color-coded to indicate the alternate function key (blue) values. Note that keypad functions can be changed by an application so the mobile computer’s keypad may not function exactly as described. See Table 2-13 on page 2-44 for key and button descriptions and Table 2-14 on page 2-47 for the keypad’s special functions.
2 - 44 MC909X User Guide Table 2-13 VT Emulator Descriptions Key Description Power (red) Turns the mobile computer on and off. Performs a warm boot and a cold boot. See Windows Mobile 5.0 Devices on page 2-54 for information about performing a warn and cold boot. Green/Red Dot To use a key as an application key (APP key) on the keyboard, a new keyboard remap table must be created and installed. However, the Green/Red dot keys can be remapped as APP keys through the registry.
Operating the MC909X 2 - 45 Table 2-13 VT Emulator Descriptions (Continued) Key Description Application These keys can be assigned to an application. F6 and F7 keys cannot be remapped and are dedicated by the Operating System to control volume level. When these keys are pressed, Shell.exe traps them and displays the volume adjustment window. To get these keys to an application, call GXOpenInput() at the beginning of the application and call GXCloseInput() at the end of the application.
2 - 46 MC909X User Guide Table 2-13 VT Emulator Descriptions (Continued) Key Description Star Produces an asterisk. Enter Executes a selected item or function. For Windows Mobile 5.0: The default behavior of the RETURN key sends an extra character, which causes a Microsoft Word or Notes application to exit.
Operating the MC909X 2 - 47 Keypad Special Functions The keypad special functions are color coded on the keypads. For example, on the 53-key keypad, the display backlight icon is blue indicating that the blue function key must be selected first to access the display backlight. On the 43-key keypad, the display backlight icon is white indicating that the display backlight is the default value for that key.
2 - 48 MC909X User Guide Entering Data When entering data on the keypad, use either the single-hand method or the two-hand method as shown in Figure 2-26. Single-hand Method Two-hand Method Figure 2-26 Entering Data on the Keypad Using the Power Button Press the red Power button to turn the mobile computer screen on and off (suspend mode). The mobile computer is on when the screen is on and the mobile computer is in suspend mode when the screen is off.
Operating the MC909X 2 - 49 • On Windows Mobile 5.0 - Warm Boot (Soft Reset) - Resets the mobile computer. Operating system and all applications are restarted. File storage is preserved. - Cold Boot (Hard Reset) - Resets the mobile computer Operating system and all applications are restarted. File storage is preserved. Real-Time Clock (RTC) is reset. Normally only used when a Warm Boot does not initiate.
2 - 50 MC909X User Guide Using a Bluetooth Headset You can use a Bluetooth headset for audio communication when an audio enabled application is used. See Chapter 3, Using Bluetooth for information on connecting a Bluetooth device to the mobile computer. Ensure that the mobile computer’s volume is set appropriately before putting the headset on. When a Bluetooth headset is connected the speakerphone is muted.
Operating the MC909X 2 - 51 Figure 2-28 Laser Aiming Pattern (Field of View) Operational Modes Mobile computers with an integrated imager have three modes of operation: Decode Mode, Pick List Mode and Image Capture Mode. All modes are activated by pulling the trigger or pressing the Scan button. Decode Mode This mode allows the user to decode a bar code when a single bar code in the mobile computer’s field of view.
2 - 52 MC909X User Guide NOTE Contact the Symbol Support Center if chronic scanning difficulties develop. Decoding of properly printed bar codes should be quick and effortless. Scanning Bar Codes 1. Ensure that a scan enabled application is loaded on the mobile computer. 2. Aim the scan exit window at the bar code. 3. Pull the trigger. • For mobile computers with a laser scanner, ensure the red scan beam covers the entire bar code. The red scan LED lights to indicate that the laser is on.
Operating the MC909X 2 - 53 Figure 2-32 Pick List Mode with Multiple Bar Codes in Aiming Pattern Release the trigger. 4. NOTE Imager decoding usually occurs instantaneously. The mobile computer repeats the steps required to take a digital picture (image) of a poor or difficult bar code, as long as the trigger remains pulled. Scanning Tips Optimal scanning distance varies with bar code density and scanner optics. • Hold the scanner farther away for larger symbols.
2 - 54 MC909X User Guide Performing a Warm Boot Hold down the Power button for approximately five seconds. As soon as the mobile computer starts to perform a warm boot release the Power button. Performing a Cold Boot A cold boot restarts the mobile computer and erases all user stored records and entries that are not saved in flash memory (Application and Platform folders) or a memory card. Never perform a cold boot unless a warm boot does not solve the problem.
Operating the MC909X 2 - 55 To perform a cold boot: 1. Press the primary battery release on the mobile computer to partially eject the battery from the mobile computer. 2. On an MC9090-G, while the battery is partially released, simultaneously press and release the trigger and the Power button. 3. On an MC-909X-K or MC909X-S, while the battery is partially released, simultaneously press and release the left scan button and the Power button. 4.
2 - 56 MC909X User Guide
Chapter 3 Using Bluetooth Chapter 3 Chapter 3 Using Bluetooth Introduction Bluetooth-equipped devices can communicate without wires, using frequency-hopping spread spectrum (FHSS) RF to transmit and receive data in the 2.4 GHz Industry Scientific and Medical (ISM) band (802.15.1). Bluetooth wireless technology is specifically designed for short-range (30 feet/10 meters) communications and low power consumption. Mobile computers with Bluetooth capabilities can exchange information (e.g.
3-2 MC909X User Guide on power class is difficult to obtain due to power and device differences, and whether one measures open space or closed office space. NOTE It is not recommended to perform Bluetooth wireless technology inquiry when high rate 802.11b operation is required. Security The current Bluetooth specification defines security at the link level. Application-level security is not specified. This allows application developers to define security mechanisms tailored to their specific need.
Using Bluetooth 3-3 Figure 3-1 Disable Bluetooth Enabling Bluetooth To enable Bluetooth, tap Bluetooth icon > Enable Bluetooth. The Bluetooth icon changes to indicate that Bluetooth is enabled. Figure 3-2 Enable Bluetooth Bluetooth Power States Cold Boot When a cold boot is performed on the mobile computer, Bluetooth turns off. It is normal to see the Bluetooth icon appear and disappear, as well as a wait cursor, when initialization proceeds in all modes.
3-4 MC909X User Guide Suspend When the mobile computer suspends, Bluetooth turns off. NOTE When the mobile computer is placed in suspend mode, the Bluetooth radio mode powers off and the piconet (Bluetooth connection) is dropped. When the mobile computer resumes, it could take up to 10 seconds for the Bluetooth radio driver to re-initialize the radio. Resume When the mobile computer resumes, Bluetooth turns on if it was on prior to suspend.
Using Bluetooth 3-5 Modes The BTExplorer application has two mode for managing Bluetooth connections: Wizard Mode and Explorer Mode. The Wizard Mode is for novice Bluetooth users and the Explorer Mode is for experienced Bluetooth users. Wizard Mode Wizard Mode provides a simple step by step process for discovering and connecting to Bluetooth devices. The wizard takes you through the entire process. NOTE When switching between Wizard Mode and Explorer Mode, all active connections are closed.
3-6 MC909X User Guide Figure 3-5 Select Remote Device Window NOTE 5. Devices discovered previously are listed to save time. To start a new device discovery, tap and hold and select Discover Devices from the menu. Select a device from the list and then tap Next. The Connection Favorite Options window appears. Figure 3-6 Connection Favorite Options Window 6. Select Save As Favorite check box to save this service in the Favorite view. 7.
Using Bluetooth 3-7 Figure 3-7 Connection Summary Window Tap Connect to connect to the service. 9.
3-8 MC909X User Guide Figure 3-8 Explorer Mode Window You can also use the “tap and hold” technique to view available options. Scroll bars and view options are like those you’re familiar with on your Windows desktop.
Using Bluetooth 3-9 Figure 3-9 BTExplorer Window 4. Tap and hold Remote Devices and select Discover Devices from the pop-up menu. The mobile computer searches for Bluetooth devices in the area. Figure 3-10 Discover Devices 5. The discovered devices display in the Untrusted Devices folder.
3 - 10 MC909X User Guide Bonding with Discovered Device(s) A bond is a relationship created between the mobile computer and another Bluetooth device in order to exchange information in a secure manner. Creating a bond involves entering the same PIN on the two devices to bond. Once a bond is created, and the Bluetooth radios are turned on, the devices recognize the bond and are able to exchange information without re-entering a PIN. To bond with a discovered Bluetooth device: 1. Discover remote devices.
Using Bluetooth 3 - 11 Figure 3-14 Bonded (Paired) Discovered Device Renaming a Bonded Device If it is necessary to rename a bonded device, it can be done from the BTExplorer window. 1. Launch BTExplorer. 2. Tap and hold the device to rename and select Rename in the pop-up menu. Figure 3-15 Rename Device Selection Dialog Box 3. The Change Device Name window appears.
3 - 12 MC909X User Guide Figure 3-16 Change Device Name Window 4. Enter a new name for the bonded device in the text box. Tap OK. Deleting a Bonded Device If it is no longer necessary to connect with a device, delete it from the Bluetooth Bonded Devices window. 1. Launch BTExplorer. 2. Tap and hold the device to delete and.select Delete in the pop-up menu. Figure 3-17 Delete a Bonded Device 3. A confirmation dialog appears. Tap Yes.
Using Bluetooth 3 - 13 Figure 3-18 PIN Code Request Window NOTE Connections to untrusted devices are a security risk. 3. In the PIN Code: text box, enter the same PIN that was entered on the device requesting the bond. The PIN must be between 1 and 16 characters. 4. In the Device Name: text box, edit the name of the device requesting the bond, if desired. 5. Tap OK. 6. The bond is created and the mobile computer can now exchange information with the other device.
3 - 14 MC909X User Guide 3. The mobile computer communicates with the remote device and then lists the services under the device name. Figure 3-20 List of Discovered Services Some examples of available services are: - File Transfer Services - Dial-Up Networking Services - Headset or Hands-Free Services - OBEX Object Push Services - Serial Port Services These services are discussed in the following paragraphs. File Transfer Services NOTE Shared folders are a security risk.
Using Bluetooth 3 - 15 Figure 3-21 Remote Device Folders 9. Tap and hold on the file. A pop-up menu appears. 10. Select the action to perform: a. New - create a new file or folder. on the remote device b. Delete - delete the selected file on the remote device. c. Get File - copy the file from the remote device to the mobile computer. d. Put File - copies a file from the mobile computer to the remote device. Create New File or Folder To create a new folder or file on the remote device: 1.
3 - 16 MC909X User Guide Put File To copy a file to a remote device: 1. Tap and hold on the file and select Put. The Send Local File window appears. 2. Navigate to the directory to save the file and select a file. 3. Tap Open. The file is transferred from the mobile computer to the remote device. Connect to Internet Using Access Point This section explains how to access a Bluetooth-enabled LAN access point (AP) for a network connection.
Using Bluetooth 3 - 17 3. In BTExplorer, select the Remote Devices folder. 4. Select the Trusted Devices folder. 5. Tap the remote device folder. 6. Tap and hold on Dial-up Networking and select Connect from the pop-up menu. The Select Dial-up Networking Entry window appears. Figure 3-22 Select Dial-up Networking Entry Window NOTE If a dial-up entry is not listed, see Add a Dial-up Entry on page 3-18. 7. Select a dial-up entry. 8. Tap OK.
3 - 18 MC909X User Guide 13. Tap OK. 14. The phone begins dialing. 15. The phone connects to the network. 16. To end a session, tap the Connection icon and then tap Disconnect in the dialog box. Add a Dial-up Entry To add a dial-up entry: 1. In the Select Dial-up Networking Entry window, tap and hold and then select Add Entry from the pop-up menu. Figure 3-24 Add Dial-Up Entry 2. The Add Phone Book Entry window appears. Figure 3-25 Add Phone Book Entry 3.
Using Bluetooth 3 - 19 7. Tap OK. OBEX Object Push Services Object Exchange (OBEX) is a set of protocols allowing objects such as Contacts or pictures to be shared using Bluetooth. To exchange contact information with another Bluetooth enabled device: 1. Ensure the mobile computer is discoverable and connectable. See Bluetooth Settings on page 3-22. 2. Discover and bond (pair) with the remote device.See Bonding with Discovered Device(s) on page 3-10. 3.
3 - 20 MC909X User Guide 8. Tap . The Send Local Picture window appears. Figure 3-27 Send Local Picture Window 9. Navigate to the picture that you want to send to the other device. 10. Tap Open. 11. Tap OK. The picture is sent to the other device and a confirmation dialog box appears on the other device to accept the picture. A Send Picture dialog appears. 12. Tap Ok.
Using Bluetooth 3 - 21 Headset Services NOTE Not available on MC9090-G with Windows CE 5.0. To connect to a Bluetooth headset: 1. Ensure the mobile computer is discoverable and connectable. See Bluetooth Settings on page 3-22. 2. Discover and bond (pair) with the headset. 3. In BTExplorer, select the Remote Devices folder. 4. Select the Trusted Devices folder. 5. Tap the remote device folder. 6. Tap and hold on the remote device and select Explore. A headset service item appears. 7.
3 - 22 MC909X User Guide 4. Select the Trusted Devices folder. 5. Tap the remote device folder. 6. Tap and hold Serial Port and select Connect in the pop-up menu. The Remote Service Connection window appears. Figure 3-28 Remote Service Connection Window 7. In the Local COM Port drop-down list select a COM port. 8. Tap OK. Personal Area Network Services Connect two or more Bluetooth devices to share files, collaborate or play multi player games. To establish a Personal Area Network connection: 1.
Using Bluetooth 3 - 23 Figure 3-29 BTExplorer Settings - Device Info Tab Device Name Displays the name of the mobile computer. Discoverable Mode Allows you to set the mobile computer to be discoverable by other Bluetooth devices or not be discoverable. Note: For security reasons, the default is set to Non Discoverable. Connectable Mode Allows you to set the mobile computer to be connectable by other Bluetooth devices or not be connectable.
3 - 24 MC909X User Guide Figure 3-31 Add Local Service Window 2. In the list, select a service to add. 3. Tap OK. The Edit Local Service window displays for the selected service. 4. Select the appropriate information and then tap OK. See the following paragraphs for detailed information on the available services. Dial-Up Networking Service Dial-up Networking allows a dial-up modem to be accessed by other Bluetooth devices.
Using Bluetooth 3 - 25 File Transfer Service File transfer allows files to be browsed by other Bluetooth devices. Figure 3-33 File Transfer Information Window Service Name Displays the name of the service. Service Security Select the type of security from the drop-down list; None, Authenticate or Authenticate/Encrypt. Root Directory Select the directory that other Bluetooth devices can access. File Permissions Select the file permissions for the selected directory.
3 - 26 MC909X User Guide Service Name Displays the name of the service. Service Security Select the type of security from the drop-down list; None, Authenticate or Authenticate/Encrypt. Business Card Select a contact information to another mobile device. Do not allow clients to push objects Disables clients from pushing objects to the mobile computer. Inbox Directory Select a directory where another Bluetooth device can store files.
Using Bluetooth 3 - 27 Figure 3-36 Serial Port Service Window Service Name Displays the name of the service. Service Security Select the type of security from the drop-down list; None, Authenticate or Authenticate/Encrypt. Local COM Port Select the COM port. Select COM1 to use a modem or other device that is connected to the connector on the bottom of the mobile computer. Local Baud Rate Select the communication baud rate. Local Port Options Select the port option.
3 - 28 MC909X User Guide Security Tab To adjust the security settings for an individual service, select the Services tab first, then select the individual service, then Properties. Figure 3-38 BTExplorer Settings - Security Tab Use PIN Code (Incoming Connecting) Select for automatic use of the PIN code entered in the PIN Code text box. It is recommended not to use this automatic PIN code feature. See Security on page 3-2 for more information. PIN Code Enter the PIN code.
Using Bluetooth 3 - 29 Figure 3-39 BTExplorer Settings - Discovery Tab Inquiry Length Sets the amount of time that the mobile computer takes to discover Bluetooth devices in the area. Name Discovery Mode Select either Automatic or manual. Discovered Devices Deletes all discovered devices and link keys. Virtual COM Port Tab Use the Virtual COM Port tab to select the COM ports for Bluetooth communication.
3 - 30 MC909X User Guide Figure 3-41 COM Port Connection Miscellaneous Tab Figure 3-42 BTExplorer Settings - Miscellaneous Tab Highlight Connections Select the connection type to highlight when connected. In the Wizard Mode, the only option is Favorites or None. In the Explorer Mode the options are None, Tree View Only, List View Only or Tree and List View. Apply Text Style Select the text style to be applied to the connection text.
Using MC9094 Phone Chapter 4 Chapter 4 Chapter 4 Using MC9094 Phone Introduction Use the MC9094 phone to make phone calls, set up speed dials, keep track of calls, and send text messages. Your wireless service provider may also provide other services such as voice mail, call forwarding, and caller ID. Also use the integrated phone to connect to an ISP or work network in order to browse the Web and read e-mail.
4-2 MC909X User Guide To receive calls when the mobile computer is suspended, leave the phone radio turned on and ensure the mobile computer is set to wake with any key. Making a Call Using the Keypad Phone calls can be dialed from the phone keypad, using speed dial or from call history. The most direct method is by using the phone keypad. You can communicate on the phone using the mobile computer’s speakerphone or a headset. To make a call using the phone keypad: 1.
Using MC9094 Phone 4-3 Figure 4-3 Incoming Call To ignore the incoming the call tap Ignore. This may send the caller to voice mail, depending on the service provider. To end the call tap End or press the red dot key on the mobile computer keypad. Audio Modes The mobile computer offers two audio modes to use during phone calls: • Speaker Mode: Use the mobile computer as if on speaker phone. Tap the Speaker On button to activate this mode.
4-4 MC909X User Guide Muting a Call During a call, you can mute the microphone so that the person on the line can be heard but cannot hear conversation from the microphone. This is useful when there is conversation or background noise on the user’s end. To mute or unmute a call: 1. Tap Start > Phone or press the green phone key on the mobile computer’s keypad. 2. Tap Mute on the phonepad. The Mute icon appears.
Using MC9094 Phone 4-5 Note icon Figure 4-6 Call History - Notes Menu 4. Select View Note. Figure 4-7 Call History - Notes 5. Tap ok to exit. NOTE Notes can also be accessed directly from the Notes application by tapping Start > Notes. Using Speed Dial Create speed dial numbers to dial frequently called numbers with a single tap. Before a speed dial entry can be created, the phone number must already exist in Contacts. Adding a Speed Dial Entry To add a speed dial entry from the phone keypad: 1.
4-6 MC909X User Guide Figure 4-8 Contacts 4. Tap the desired contact name and number in the list. Figure 4-9 Speed Dial Contact Location 5. In the Location field, tap the Up/Down arrows to select an available location to assign as the new speed dial entry. The first speed dial location is reserved for voice mail. 6. Tap ok to add the contact to the speed dial list.
Using MC9094 Phone 7. Tap ok to exit the Speed Dial Contact List. To add a speed dial entry from the Contacts window: 1. Tap Start > Contacts. Figure 4-11 Contacts 2. Tap and hold the contact name. Figure 4-12 Contacts Menu 3. Tap Add to Speed Dial.
4-8 MC909X User Guide Figure 4-13 Speed Dial Contact Location 4. Tap the Up/Down arrows to select an available location to assign as the new speed dial entry. The first speed dial location is reserved for voice mail. 5. Tap ok. Editing a Speed Dial Entry 1. Tap Start > Phone or press the green dot key on the mobile computer’s keypad. 2. Tap Speed Dial. Figure 4-14 Speed Dial Contact List 3. Tap and hold the contact name.
Using MC9094 Phone 4-9 Figure 4-15 Speed Dial Delete Menu 4. Tap Edit... . 5. Change the name, phone number or location information. 6. Tap ok. NOTE Editing names and phone numbers in Speed Dial does not alter contact information in Contacts (Start > Contacts). Deleting a Speed Dial Entry 1. Tap Start > Phone or press the green dot key on the mobile computer’s keypad. 2. Tap Speed Dial. 3. Tap and hold the contact name. Figure 4-16 Speed Dial Delete Menu 4. Tap Delete. 5.
4 - 10 MC909X User Guide Making a Speed Dial Call Use Speed Dial to call someone saved in the speed dial directory. To make a speed dial call: 1. Tap Start > Phone or press the green dot key on the mobile computer’s keypad. 2. Tap and hold the speed dial location number assigned to a contact. (To dial a one-digit speed dial location number, tap and hold the speed dial number. To dial a two-digit speed dial location number, tap the first digit and then tap and hold the second digit.
Using MC9094 Phone 4 - 11 Phone icon Figure 4-18 Call History 3. Tap the phone icon next to the number to begin dialing and return to the phone keypad. 4. Tap End or press the red dot key on the mobile computer keypad to stop dialing or end the call. Managing Call History Change views, reset the call timer and delete calls to manage the calls stored in Call History. Changing the Call History View 1.
4 - 12 MC909X User Guide Resetting the Recent Calls Counter 1. Tap Start > Phone or press the green dot key on the mobile computer’s keypad to display the Phone keypad. 2. From the Phone keypad, tap Call History. 3. Tap Menu. Figure 4-20 Call History - Tools Menu 4. Select Call Timers... . Figure 4-21 Call History - Call Timers 5. Tap Reset. (The All Calls: counter cannot be reset.) 6. Tap ok to exit the Call Timers window. Deleting Call History Items by Call Date 1.
Using MC9094 Phone 4 - 13 Figure 4-22 Call History - Call Timers 4. In the Delete call history items older than: drop-down list, select a time period on which to base deletion of stored items. 5. Tap ok to exit the Call Timers window. Deleting All Call History Items 1. Tap Start > Phone or press the green dot key on the mobile computer’s keypad to display the Phone keypad. 2. From the Phone keypad, tap Call History. 3. Tap Menu. Figure 4-23 Call History - Tools Menu 4. Select Delete all calls.
4 - 14 MC909X User Guide 5. Tap Yes. 6. Tap ok to exit the Call History window. Viewing Call Status 1. Tap Start > Phone or press the green dot key on the mobile computer’s keypad to display the Phone keypad. 2. From the Phone keypad, tap Call History. 3. Tap an entry in the list to see the date, time, and duration of a call. Figure 4-25 Call History - Detail NOTE 4. When more than one call is on the phone line, only the duration of the first call is recorded. Tap ok to exit.
Using MC9094 Phone 4 - 15 Figure 4-26 Call History - Menu 4. Select an applicable item form the menu, as needed. 5. Depending on the item selected, the appropriate window displays. For example, if Send SMS is selected, the Inbox window displays. 6. Tap ok to exit the Call History window. Using Contacts Use Contacts to make a call without having to look up or manually enter the phone number. To make a call from Contacts: 1. Tap Start > Contacts. 2. Tap and hold the contact name.
4 - 16 MC909X User Guide Swapping Calls To move between two or more phone calls: 1. Tap Start - Phone or press the green phone key on the mobile computer’s keypad to display the Phone keypad. 2. Enter the first phone number and press Talk. When the call connects, Hold appears on the keypad. Figure 4-28 Call Swapping - Hold 3. Tap Hold to place the first number on hold. 4. Enter the second number and tap Talk. Figure 4-29 Call Conferencing - Conferencing 5.
Using MC9094 Phone 4 - 17 1. Tap Start > Phone or press the green phone key on the mobile computer’s keypad to display the Phone keypad. 2. Enter the first phone number and press Talk. When the call connects, Hold appears on the keypad. Figure 4-30 Call Swapping - Hold 3. Tap Hold to place the first number on hold. 4. Enter the second number and tap Talk. 5. Tap Hold to place the second number on hold. 6. Tap Menu > Conference to place the two numbers in conference mode.
4 - 18 MC909X User Guide Text Messaging Use the Short Message Service window to send and receive text messages to and from mobile phones. The text can be comprised of words, numbers or an alphanumeric combination no longer than 160 characters. Short text messages delivered over mobile networks transmit from the sending mobile computer, are stored in a central short message center then forwarded to the destination mobile device.
Using MC9094 Phone 4 - 19 5. Tap Send to send the message. Establishing a Data Connection To make a data connection: 1. Ensure a SIM card is installed in the mobile computer. 2. Ensure an GPRS data connection was configured. Refer to the MC909X Integrator Guide for instructions on configuring the mobile computer for data connection. 3. Tap at the top of the screen. Figure 4-34 Connectivity Dialog 4. Tap Settings. 5. Tap Managing existing connections. 6.
4 - 20 MC909X User Guide Figure 4-36 Connecting Using GPRS Packet Data Modem 8. If the SIM card is protected with a Personal Identification Number (PIN), a dialog box pops up requesting the appropriate PIN to unlock the SIM card. In this case, enter the PIN and tap ok. NOTE 9. Emergency calls can be placed at any time, without requiring a PIN or a SIM card. When a connection is established, launch Internet Explorer to browse the Internet or launch an applicable application.
Using MC9094 Phone 4 - 21 NOTE When Disconnect is tapped during an active data transfer (e.g., downloading a web page), the GPRS connection automatically reconnects. The GPRS connection cannot be disconnected until the data transfer is complete.
4 - 22 MC909X User Guide
Chapter 5 Using the MC9097 Phone Chapter 5 Chapter 5 Using the MC9097 Phone Introduction Use the MC9097 phone to make phone and walkie-talkie calls, set up speed dials and keep track of calls. Your wireless service provider may also provide other services such as voice mail, call forwarding, and caller ID. Also use the integrated phone to connect to an ISP or work network in order to browse the Web and read e-mail.
5-2 MC909X User Guide Figure 5-1 MC9097 Phone Window - Phone Tab 2. The phone number is listed at the top of the window after the first call is received. 3. Tap ok. To find your walkie-talkie number: 1. Tap Start > Settings > Personal tab > Phone icon > Phone Info tab. or Start > Phone > Menu > Options > Phone Info tab. Figure 5-2 MC9097 Phone Window - Phone Info Tab 2. The walkie-talkie number is listed in the first line, PPT/DC #:. 3. Tap ok.
Using the MC9097 Phone 5-3 Accessing the Phone Keypad The keypad can be accessed regardless of the program in use on the mobile computer. Applications on the mobile computer can be in use during a call. Antenna/Signal Figure 5-3 MC9097 Phone Keypads To access the phone keypad tap Start > Phone or press the green dot key on the mobile computer’s keypad.
5-4 MC909X User Guide Figure 5-4 Connectivity Dialog Box 2. Tap Turn on flight mode to turn the phone off. The phone takes approximately two to five seconds to shut the radio off. NOTE When turning flight mode on the Bluetooth radio is also turned off. To turn the phone on: 1. Tap at the top of the screen to display the Phone dialog box. Figure 5-5 Connectivity Dialog Box 2. Tap Turn off flight mode to turn the phone on. It takes 20 to 40 seconds for the radio to power on.
Using the MC9097 Phone With AKU 2.2 and Higher NOTE To determine the operating system AKU version, see Software Versions on page vi. Windows Mobile 5.0 devices with AKU 2.2 and higher include Wireless Manager, which provides a simple method of enabling and disabling the phone. To open Wireless Manager, tap the Connectivity icon. Figure 5-6 Opening Wireless Manager Select Wireless Manager. The Wireless Manager window appears.
5-6 MC909X User Guide Using the Speakerphone and a Headset You can use the MC9097 with the built-in speakerphone, with a wired headset or a Bluetooth headset. The MC9097 defaults to speakerphone mode. When a wired headset is plugged into the MC9097 audio connector or a Bluetooth headset is configured for use with the MC9097, the speakerphone is muted and audio is heard through the headset.
Using the MC9097 Phone 5-7 Making a Phone Call You may access the phone keypad from any application on your mobile computer. You may also access other applications on the mobile computer while you are on a call. When dialing numbers on the mobile computer, use either the stylus to tap numbers on the phone keypad, or use the keypad, located on the bottom half of the device. If the roaming icon appear at the top of the screen, you must enter the area code before the phone number.
5-8 MC909X User Guide Figure 5-10 Contact Information 3. Select the number to call (i.e., the contact’s mobile or home number). 4. Tap Call. The mobile computer places the phone call. 5. Tap End to terminate the phone call. Making Calls from Recent Call List You may access the Recent Calls list to make calls. To make calls from the Recent Calls list: 1. Tap Start > Phone or press the green dot key on the mobile computer’s keypad. 2. Tap Call History. The Call History window appears.
Using the MC9097 Phone 5-9 Receiving Phone Calls A dialog box appears on the mobile computer’s display window when an incoming call is received. If the phone is set to ring, a ring tone sounds. The user has the option to answer the incoming call or ignore the call. You may choose to answer or ignore any incoming phone calls. When a call is placed to the mobile computer, the Incoming Calls dialog box appears. The dialog box also lists the phone number of the person who is calling.
5 - 10 MC909X User Guide Walkie-Talkie Calls Use the mobile computer to make walkie-talkie phone calls to other network subscribers. Every walkie-talkie number has 3 parts - an area ID, a network ID, and a member ID. An asterisk separates each part of the walkie-talkie number. When placing a walkie-talkie call, you must also enter the asterisks as part of the number, i.e., 166*455*8490. If the subscriber you are calling has the same area ID and network ID, you just have to enter the member ID number.
Using the MC9097 Phone 5 - 11 Sending Call Alerts Sending a call alert lets the recipient know you want to talk to him or her on a walkie-talkie call. When you send a call alert, the recipient’s phone emits a series of beeps or vibrations. The phone displays your name or walkie-talkie number.
5 - 12 MC909X User Guide Making Walkie-Talkie Calls To make a walkie-talkie call: 1. Tap Start > Phone or press the green dot key on the mobile computer’s keypad. Figure 5-17 Phone Keypad 2. Enter the walkie-talkie number to call. 3. Press and hold the black walkie-talkie button, located on the left side of the mobile computer. Walkie-Talkie Button Figure 5-18 Walkie-Talkie Button 4. Begin talking after the mobile computer emits a chirping sound. 5. Release the walkie-talkie button to listen.
Using the MC9097 Phone 5 - 13 To make a walkie-talkie call from Contacts: 1. Tap Contacts, at the bottom of the window. The Contacts window appears. NOTE 2. To add a walkie-talkie number to the Contact list, enter the number in the Radio tel: field in the Contact window. Find the contact to call and tap their name. The contact information appears. Figure 5-19 Contact Information 3. Select the Call radio item. 4. Tap Call. The mobile computer places the walkie-talkie call.
5 - 14 MC909X User Guide To clear a call alert tap Clear when the call alert is incoming. NOTE You may also go to the Call History window and clear the call alert there. The call alerts appear as walkie-talkie calls. Call alerts remain in your recent calls list until you delete them or until they reach the end of the list. Receiving Walkie-Talkie Calls To receive a walkie-talkie call: 1. The mobile computer emits a chirp when you have an incoming walkie-talkie call. 2.
Using the MC9097 Phone 5 - 15 Establishing a Data Packet Connection The iDEN Data Packet settings are pre-configured on the device. Ensure that data packet service is available from your service provider. With a data packet connection you can connect to the internet or transfer data using an application. Refer to the MC909X Integrator Guide for information on setting up a data packet connection.
5 - 16 MC909X User Guide Figure 5-22 Disconnecting a Data Connection 2. Tap Disconnect. Phone Options Creating Notes Notes can be taken during a call from any window within the Phone application. You can even take notes when you are on another call. To write notes during a call: 1. Tap Note on the display. The Notes window appears listing the phone number and name of the person to whom you are speaking, as well as the date and time of the call. Figure 5-23 Notes Window 2.
Using the MC9097 Phone 5 - 17 1. Tap Start > Phone or press the green dot key on the mobile computer’s keypad. 2. Tap Menu > Create Note. The Notes window appears with information on the last number you dialed. 3. Type your notes. 4. Tap OK. The phone application saves the note with the call history for that particular call. To access a note created during a call: 1. Tap Start > Phone or press the green dot key on the mobile computer’s keypad. 2. From the Phone keypad, tap Call History. 3.
5 - 18 MC909X User Guide Muting a Call During a call, the microphone can be muted so that the person on the line can be heard but cannot hear conversation from the microphone. This is useful if the user is listening to the person on the line and there’s conversation or background noise on the user’s end. To mute or un-mute a call: 1. Answer or place a phone call. Once the call connects to the other party, the phone keypad displays the Mute button. 2. Tap Mute. The Mute icon appears.
Using the MC9097 Phone 5 - 19 or Tap Speed Dial. A list of speed dial numbers appears. Speed Dial Location Number Figure 5-27 Speed Dial List 3. Tap the entry number for the speed dial number. 4. The phone makes the call. 5. To stop dialing or end the call, tap End or press the red dot key on the mobile computer keypad. Add a Speed Dial Entry To create a speed dial entry from the Contacts list: 1. Tap Start > Phone or press the green dot key on the mobile computer’s keypad. 2. Tap Speed Dial.
5 - 20 MC909X User Guide Figure 5-29 Speed Dial Contact Location 5. Tap the up/down arrows to select an available location to assign as the new speed dial entry. The first speed dial location is reserved for voicemail. 6. Tap OK. The contact saves to the Speed Dial list with the associated speed dial number. Create a New Speed Dial Entry To create a new speed dial entry: 1. Tap Start > Phone or press the green dot key on the mobile computer’s keypad. 2. Tap Speed Dial.
Using the MC9097 Phone 5 - 21 3. Tap and hold on the speed dial entry to edit and select Edit from the pop-up menu. The Speed Dial contact window appears. 4. Edit the contact. 5. Tap OK. The contact information saves. Delete a Speed Dial Entry To delete a speed dial entry: NOTE Deleting names and phone numbers in Speed Dial does not delete the contact information in Contacts. 1. Tap Speed Dial. A list of speed dial numbers appears. 2.
5 - 22 MC909X User Guide Figure 5-31 Missed Call Window 2. Tap View to see the phone number of the person whose call you missed. 3. Tap the number again to immediately call the person back. Viewing Call History Use Call History to call someone who was recently called, or recently called in. Call History provides the time and duration of all incoming, outgoing and missed calls. It also provides a summary of total calls and easy access to notes taken during a call. To view complete call history: 1.
Using the MC9097 Phone 5 - 23 Figure 5-33 Call History Filtering 2. Tap Menu > Filter. A pop-up menu appears with All Calls, Missed, Outgoing, Incoming and By Caller options. 3. Select the call type you want to view (i.e., Outgoing). The Call History log for all calls of the selected type appears. Viewing Call Status To view call status: 1. Tap Call History. A log of incoming, outgoing, walkie-talkie, and call alert calls appears. 2. Tap the contact with the status you want to view.
5 - 24 MC909X User Guide Figure 5-35 Call History - Delete All Calls Menu 3. Select Delete all calls from the menu. The Permanently Delete All Calls dialog box appears. Figure 5-36 Call History - Delete All Dialog 4. Tap Yes. The mobile computer deletes the entire call history log. Deleting Calls Based on Length of Time To delete calls based on length of time in Call History log: 1. Tap Call History. A log of incoming, outgoing, walkie-talkie, and call alert calls appears. 2. Tap Menu > Call Timers.
Using the MC9097 Phone 5 - 25 Deleting individual Calls To delete calls individually: 1. Tap Call History. A log of incoming, outgoing, walkie-talkie, and call alert calls appears. 2. Tap the phone number of the call that you want to delete. A drop-down menu appears with the time, date, and duration of the selected call. Figure 5-38 Delete Call from Call History 3. Tap and hold the phone number one more time and select Delete from the pop-up menu.
5 - 26 MC909X User Guide
Chapter 6 Accessories Chapter 6 Chapter 6 Accessories Introduction The MC909X accessories provide a variety of product support capabilities. Accessories include cradles, cables and charges. Keypads Optional keypads include the interchangeable modular application specific keypads. The modular keypads can be changed in the field as necessary to support specialized applications. Cradles • Single Slot Serial/USB cradle charges the mobile computer main battery and a spare battery.
6-2 MC909X User Guide Keypads The mobile computer has interchangeable modular keypads. The modular keypads can be changed in the field as necessary to support specialized applications. CAUTION Do not remove the keypad while the mobile computer is on and do not operate the mobile computer with the keypad detached. Follow proper Electro-Static Discharge (ESD) precautions to avoid damaging the MMC and SD card.
Accessories 6-3 Figure 6-2 Installing the Keypad 4. Perform a cold boot. Multi Media Card (MMC) / Secure Device (SD) Card The MMC provides secondary non-volatile storage. The MMC is located under the keypad (see Figure 6-1 on page 6-2). NOTE SD cards are inter-operable with MMC cards and can also be used in MC909X mobile computers. CAUTION Do not remove the keypad while the mobile computer is on and do not operate the mobile computer with the keypad detached.
6-4 MC909X User Guide MMC/SD MMC/SD Retaining Door Figure 6-3 Inserting the MMC/SD CAUTION 5. Do not apply more than 4 in-lbs of torque when tightening the keypad screws. Replace the keypad and re-attach using the two screws (see Figure 6-2 on page 6-3).
Accessories 6-5 Single Slot Serial/USB Cradle This section describes how to use a single Single Slot Serial/USB cradle (Figure 6-4) with the mobile computer. For serial and USB communication setup procedures refer to the MC909X Integrator Guide. Indicator LED Bar Spare Battery Spare Battery Charging Well Spare Battery Charging LED Figure 6-4 Single Slot Serial/USB Cradle CAUTION Do not place coins, keys or paper clips in cradle well.
6-6 MC909X User Guide . MC909X-S Battery Short Battery Adapter (P/N BAP9000-100) Spare Battery Charging Well Figure 6-5 MC909X-S Spare Battery Charging CAUTION Use only a Symbol approved power supply output rated 12 VDC and minimum 3.3 A. Use of an alternative power supply will void the product warranty and may cause product damage. See Appendix C, Regulatory for the power supply regulatory compliance statement.
Accessories 6-7 The mobile computer’s amber charge LED, located in the Indicator LED Bar, shows the status of the battery charging in the mobile computer. See Table 1-2 on page 1-7 for charging status indications. The amber spare battery charging LED on the cradle (see Figure 6-4 on page 6-5) shows the status of the spare battery charging in the cradle. See Table 6-2 for charging status indications. Batteries usually charge in less than four hours.
6-8 MC909X User Guide CAUTION Do not place coins, keys or paper clips in cradle well. CAUTION Use only a Symbol approved power supply output rated 12 VDC and minimum 9 A. Use of an alternative power supply will void the product warranty and may cause product damage. See Appendix C, Regulatory for the power supply regulatory compliance statement. The Four Slot Ethernet cradle has the following attributes: • Provides 12VDC power for operating the mobile computer.
Accessories 6-9 Four Slot Charge Only Cradle This section describes how to use a Four Slot Charge Only cradle with the mobile computer. Figure 6-7 Four Slot Charge Only Cradle (MC909X-G Shown) CAUTION Do not place coins, keys or paper clips in cradle well. CAUTION Use only a Symbol approved power supply output rated 12 VDC and minimum 9 A. Use of an alternative power supply will void the product warranty and may cause product damage.
6 - 10 MC909X User Guide Four Slot Spare Battery Charger This section describes how to use the Four Slot Spare Battery Charger to charge up to four MC909X spare batteries. Spare MC909X-S Battery Spare MC909X-S Battery Adapter Spare MC909X-G/K Battery Spare Battery Charging LEDs (4) Spare Battery Charging Figure 6-8 Four Slot Spare Battery Charger CAUTION Use only a Symbol approved power supply output rated 15 VDC and minimum 5 A.
Accessories 6 - 11 The battery usually charges in less than four hours. Table 6-2 Spare Battery LED Charging Indicators LED Indication Off No spare battery in slot; spare battery not placed correctly; cradle is not powered. Fast Blinking Amber Error in charging; check placement of spare battery. Slow Blinking Amber Spare battery is charging. Solid Amber Charging complete. Magnetic Stripe Reader This section describes how to set up and use the snap-on MSR with the mobile computer.
6 - 12 MC909X User Guide NOTE When a mobile computer with Windows Mobile 5.0 is connected to a host computer through the MSR and an ActiveSync connection is made, the WLAN and WWAN radios (if applicable) are disabled. This is a Microsoft security feature to prevent connection to two networks at the same time. • Provides serial connection through the serial pass-through port for communication with a serial device, such as a host computer.
Accessories 6 - 13 Setup Into Cigarette Lighter AC Power Supply Vehicle Power Supply Figure 6-11 MSR Power Connection Serial Port To Device Serial/USB Port Figure 6-12 MSR Serial/USB Connection Battery Charging Indicators To charge the mobile computer’s battery through the MSR, connect the power supply to the MSR (see Figure 6-11 on page 6-13), then attach the MSR to the mobile computer. The mobile computer begins charging automatically.
6 - 14 MC909X User Guide Serial/USB Connection The MSR can connect to and communicate with a serial/USB device, such as a printer or host computer, through its serial port. To connect the MSR to a serial/USB device, connect one end of the serial device cable into the serial port on the MSR and the other end into the serial/USB port on the device. Using the MSR The MSR9000 sample application is designed to work with the MSR. This sample application illustrates how an application should handle MSR inputs.
Accessories 6 - 15 Cable Adapter Module This section describes how to set up and use the snap-on CAM with the mobile computer. The CAM snaps on to the bottom of the mobile computer and can be easily removed when not in use. Latches Pogo Pin Pass-through Connector Latch Grip Power Port Communications Port Figure 6-14 Cable Adapter Module CAUTION Use only a Symbol approved power supply output rated 12 VDC and minimum 3.3 A.
6 - 16 MC909X User Guide Attaching and Removing To attach, snap the CAM onto the bottom of the mobile computer. Figure 6-15 Attaching the CAM (MC909X-G shown) To remove, squeeze the latch grips and pull the CAM from the mobile computer. NOTE Remove the CAM from the bottom of the mobile computer before using a cradle for charging and communication.
Accessories 6 - 17 Serial Port To Device Serial/USB Port Figure 6-17 CAM Serial Connection Battery Charging Indicators To charge the mobile computer’s battery through the CAM, connect the power supply to the CAM (see Figure 6-16 on page 6-16), then attach the CAM to the mobile computer. The mobile computer begins charging automatically. NOTE Batteries must be charged within the 32° to 104° F (0° to +40° C) ambient temperature range.
6 - 18 MC909X User Guide Universal Battery Charger (UBC) Adapter This section describes how to use the UBC adapter to charge a spare battery. The UBC can be used with a power supply as a standalone spare battery charger or it can be used with the four station UBC2000 to provide charging to simultaneously charge up to four spare batteries. For additional information about the UBC2000, see the UBC 2000 Universal Battery Charger Product Guide (p/n 70-33188-xx).
Accessories 6 - 19 POWER READY or STANDBY or FAULT (Green) (Flashing Yellow) (Solid Yellow) CHARGING (Solid Yellow) Figure 6-19 UBC Adapter LEDs Table 6-3 UBC Adapter Charge LED Status Indications LED Indication Description POWER Green Power is connected to the UBC Adapter. READY or Green Charging complete. STANDBY or Flashing-Yellow The battery was deeply discharged and is being trickle charged to bring the voltage up to the operating level.
6 - 20 MC909X User Guide • RJ11 or RJ12 modem cable • Functioning telephone jack that supports plug-in modems connected to the local telephone system • Setup of Country Codes to use the modem with the appropriate country’s telephone network.
Accessories 6 - 21 Connecting to the Single Slot Serial/USB Cradle Adapter cable Male 15-pin connector Line In port Phone port Phone cord Figure 6-22 Modem Module Connection - Single Slot Serial/USB Cradle CAUTION NOTE Do not connect the modem's 15-pin connector into a VGA port of a host computer. If using a phone, connect the cord from the phone to the Phone port on the modem.
6 - 22 MC909X User Guide
Chapter 7 Maintenance & Troubleshooting Chapter 7 Chapter 7 Maintenance & Troubleshooting Introduction This chapter includes instructions on cleaning and storing the mobile computer, and provides troubleshooting solutions for potential problems during mobile computer operation. Maintaining the Mobile Computer For trouble-free service, observe the following tips when using the mobile computer: • Protect the mobile computer from temperature extremes.
7-2 MC909X User Guide Troubleshooting Mobile Computer Table 7-1 Troubleshooting the Mobile Computer Problem Mobile computer does not turn on. Cause Solution Lithium-ion battery not charged. Charge or replace the lithium-ion battery in the mobile computer. Lithium-ion battery not installed properly. Ensure battery is installed properly. See Installing and Removing the Main Battery on page 1-6. System crash. Perform a warm boot. If the mobile computer still does not turn on, perform a cold boot.
Maintenance & Troubleshooting 7-3 Table 7-1 Troubleshooting the Mobile Computer (Continued) Problem Cause Solution Mobile computer is inactive. The mobile computer turns off after a period of inactivity. If the mobile computer is running on battery power, this period can be set to 30 sec., 1, 2, 3, 4, 5 or 6 minutes. If the mobile computer is running on external power, this period can be set to 1, 2, 3, 5, 10, 15 and 30 minutes. For Windows Mobile 5.
7-4 MC909X User Guide Table 7-1 Troubleshooting the Mobile Computer (Continued) Problem The mobile computer does not accept scan input. WLAN or WWAN connection is lost when the mobile computer is connected to a host computer using ActiveSync. Cause Solution Scanning application is not loaded. Verify that the unit is loaded with a scanning application. See the System Administrator. Unreadable bar code. Ensure the symbol is not defaced. Distance between exit window and bar code is incorrect.
Maintenance & Troubleshooting 7-5 Bluetooth Connection Table 7-2 Troubleshooting Bluetooth Connection Problem Cause Solution Too far from other Bluetooth devices. Move closer to the other Bluetooth device(s), within a range of 10 meters. The Bluetooth device(s) nearby are not turned on. Turn on the Bluetooth device(s) you wish to find. The Bluetooth device(s) are not in discoverable mode. Set the Bluetooth device(s) to discoverable mode.
7-6 MC909X User Guide Four Slot Charge Only Cradle Table 7-3 Troubleshooting the Four Slot Charge Only Cradle Problem Mobile computer charge indicator LED does not light. Cause Solution Cradle is not receiving power. Ensure the power supply is securely connected and receiving power. Mobile computer is not seated correctly in the cradle. Ensure the battery is properly installed in the mobile computer, and re-seat the mobile computer in the cradle.
Maintenance & Troubleshooting 7-7 Four Slot Ethernet Cradle Table 7-4 Troubleshooting the Four Slot Ethernet Cradle Symptom Attempt by the mobile computer to ActiveSync failed. During communications, no data was transmitted, or transmitted data was incomplete. Cause Solution Mobile computer removed from the cradle while the LED was blinking green. Wait one minute and reinsert the mobile computer in the cradle. This allows the cradle to attempt another synchronization.
7-8 MC909X User Guide Table 7-4 Troubleshooting the Four Slot Ethernet Cradle (Continued) Symptom Cause Solution Mobile computer has successfully connected through the cradle, but no data is being transmitted over the connection. Data is being transferred over the S24 radio link. Temporarily disable the radio link to force data transmission through the cradle. Tap the wireless LAN icon from the systray. Enter an in-valid value in the ESSID: text box and tap the OK button.
Maintenance & Troubleshooting 7-9 Table 7-4 Troubleshooting the Four Slot Ethernet Cradle (Continued) Symptom Cause Battery is not recharging. Warning Message - “! Unable to obtain a server assigned IP address. Try again later or enter an IP address in Network Settings.” Solution Mobile computer removed from the cradle too soon. Replace the mobile computer into the cradle.
7 - 10 MC909X User Guide Single Slot Serial/USB Cradle Table 7-6 Troubleshooting the Single Slot Serial/USB Cradle Symptom Possible Cause LEDs do not light when mobile computer or spare battery is inserted. Cradle is not receiving power. Ensure the power cable is connected securely to both the cradle and to AC power. Mobile computer is not seated firmly in the cradle. Remove and re-insert the mobile computer into the cradle, ensuring it is firmly seated.
Maintenance & Troubleshooting 7 - 11 Cable Adapter Module Table 7-7 Troubleshooting The Cable Adapter Module Symptom Mobile computer battery is not charging. During data communications, no data was transmitted, or transmitted data was incomplete. Possible Cause Solution Mobile computer was removed from CAM or CAM was unplugged from AC power too soon. Ensure CAM is receiving power. Ensure mobile computer is attached correctly. Confirm main battery is charging.
7 - 12 MC909X User Guide Table 7-8 Troubleshooting the Magnetic Stripe Reader (Continued) Symptom Possible Cause Solution Mobile computer battery is not charging. Mobile computer was removed from MSR or MSR was unplugged from AC power too soon. Ensure MSR is receiving power. Ensure mobile computer is attached correctly. Confirm main battery is charging.
Maintenance & Troubleshooting 7 - 13 Modem Module Table 7-9 Troubleshooting the Modem Module Symptom Possible Cause Mobile computer is not communicating through the modem. The modem cable is not fully connected. Connect the modem cable securely to both the modem and the telephone jack. Modem is not securely connected to the mobile computer. Reconnect the modem firmly to the mobile computer. Communication software is not installed or configured properly.
7 - 14 MC909X User Guide Table 7-9 Troubleshooting the Modem Module (Continued) Symptom Dial-out fails Possible Cause Solution Location setting is incorrect. Verify Dialing Locations. Verify Dialing Patterns are correct for the current location. For example, enter ‘G’ in the For local calls, dial: field to dial directly, or ‘9,G’ if the telephone system requires dialing ‘9’ first to access an outside line. Incorrect server phone number. Verify the connection phone number in the Connecting window.
Specifications Appendix A Appendix A Specifications Technical Specifications The following tables summarize the mobile computer’s intended operating environment and general technical hardware specifications. Mobile Computer The following table summarizes the mobile computer’s intended operating environment. Table A-1 Technical Specifications Item MC909X-G MC909X-K MC909X-S Physical and Environmental Characteristics Dimensions (Non-WWAN) 9.1 in. L x 3.6 in. W x 7.6 in. H 9.1 in L x 3.6 in. W x 2.
A-2 MC909X User Guide Table A-1 Technical Specifications (Continued) Item MC909X-G Operating System Microsoft Windows CE 5.0 or Windows Mobile 5.0 Premium Edition Memory (RAM/ROM) Windows CE: 64MB/64MB Windows Mobile: 64MB/128MB Expansion MC909X-K MC909X-S Microsoft Windows Mobile 5.
Appendix A: Specifications A - 3 Table A-1 Technical Specifications (Continued) Item MC909X-G MC909X-K MC909X-S WLAN Wireless Data Communications WLAN radio Operating Channels Security Voice Communication (Windows Mobile 5.0 devices only) Symbol 802.
A-4 MC909X User Guide Table A-1 Technical Specifications (Continued) Item MC909X-G MC909X-K MC909X-S Wireless WAN (WWAN) Data Communications EDGE/GPRS Radio Module N/A General features: • Quad-Band GSM 850/900/1800/1900 MHz • EDGE Multislot class 10 • GPRS Multislot class 12 • GSM release 99 • Output power: - class 4 (2 W) for GSM850 - class 4 (2 W) for EGSM900 - class 1 (1 W) for GSM1800 - class 1 (1 W) for GSM1900 Specification for fax: • Group 3, class 1 Specifications for data EDGE (E-GPRS): •
Appendix A: Specifications A - 5 Table A-1 Technical Specifications (Continued) Item MC909X-G MC909X-K MC909X-S Peripherals and Accessories Cradles Single-slot and 4-slot cradles available Printers Supports extensive line of Symbol approved printers, cables and accessories Charger 4-Slot universal battery charger Other Accessories Cable Adapter Module; Magnetic Stripe Reader; Modem; Full set of holsters In accordance with the SymbolPlus partner program Regulatory Electrical Safety Certified
A-6 MC909X User Guide Modem Module Table A-3 Environmental Parameters and Technical Hardware Specifications Item Description Asynchronous character format Up to 10 bits, including data, start, stop, and parity bits Asynchronous data rates Transmission rate fallback through 300 bps Chipset Conexant SCM Compatible public switched network jacks RJ11 Dialing capability Tone and rotary pulse Line requirements Public switched telephone network (PSTN) including international connections Operating e
Appendix A: Specifications A - 7 Mobile Computer Pin-Outs 9 17 8 1 Figure A-1 Pin Locations Table A-4 Pin-Outs PIN Number Signal Name Function 1 USB_GND USB 2 USB_D_PLUS USB 3 TXD RS232C 4 RXD RS232C 5 DCD RS232C 6 RTS RS232C 7 DSR RS232C 8 GND Ground, 2.5A max. 9 RI RS232C 10 CRADLE_DET Grounded by cradle when in cradle 11 DTR RS232C 12 Not connected Not connected 13 POWER_IN 12V, 2.
A-8 MC909X User Guide Accessory CAM and MSR Pin-Outs Figure A-2 CAM and MSR Serial Connector Table A-5 CAM and MSR Serial Connector Pin-outs Pin Signal 1 USB_5V_DET 2 USB_D_MINUS 3 USB_D_PLUS 4 GND 5 GND 6 PWR_EXT_OUT 7 CRADLE_DET* 8 DSR 9 DCD 10 TXD 11 CTS 12 DTR 13 RI 14 RTS 15 RXD
Keypad Special Keys Appendix B Appendix B Keypad Special Keys Introduction This appendix contains the keypad functions/special characters for the keypads. Each function/special character is included in the table along with how the function/special character is generated. Keypads The mobile computer is available with one of the following keypads: • 28-key keypad • 33-key keypad • 38-key keypad • 43-key keypad • 53-key keypad.
B-2 MC909X User Guide Table B-1 Special Character Generation Map (Continued) Special Character = (equal sign) 28-Key Keypad 33-Key Keypad Blue Key - 5 Blue Key - 2 38-Key Numeric Keypad Blue Key - F7 38-Key Alpha Keypad Orange Key - T 43-Key Keypad Blue Key - 53-Key Keypad Blue Key - W BKSP ; (semi-colon) Blue Key - R ` (apostrophe) Blue Key - J , (comma) Blue Key - A Orange Key - M .
Appendix B: Keypad Special Keys B - 3 Table B-1 Special Character Generation Map (Continued) Special Character + (plus sign) 28-Key Keypad SHIFT - Blue Key - 5, Blue Key - 7, SHIFT - Blue Key - 7 33-Key Keypad Blue Key - -, SHIFT - Blue Key - 2 38-Key Numeric Keypad Blue Key SHIFT - F7, Blue Key SPACE, Blue Key SHIFT - 38-Key Alpha Keypad 43-Key Keypad 53-Key Keypad Orange Key - D Blue Key - F9, Blue Key SHIFT - F9, Blue Key SHIFT - BKSP Blue Key - S, SHIFT - Blue Key - S, SHIFT - Blue Key - W O
B-4 MC909X User Guide
Regulatory Appendix C Appendix C Regulatory Introduction This appendix contains the accessory power supply regulatory compliance statements. Accessory Power Supply Regulatory Compliance Table C-1 Accessory Power Supplies, Regulatory Compliance Statements Accessory Single Slot Serial/USB Cradle Power Supply Magnetic Stripe Reader (MSR) Cable Adapter Module (CAM) Power Supplies Regulatory Compliance Statements Use only a Symbol-approved power supply output rated 12 VDC and minimum 3.3 A.
C-2 MC909X User Guide Table C-1 Accessory Power Supplies, Regulatory Compliance Statements Accessory Power Supplies Regulatory Compliance Statements Universal Battery Charger (UBC) Adapter Power Supply Use only a Symbol-approved power supply output rated 15 VDC and minimum 1.5 A. The power supply is certified to EN60950 with SELV outputs. Use of alternative power supply will invalidate any approval given to this device and may be dangerous.
Glossary GlossaryGlossary Numeric 802.11. A group of wireless specifications developed by the Institute of Electrical and Electronics Engineers (IEEE). It specifies an over-the-air interface between a wireless client and a base station or between two wireless clients. 802.11a. Operates in the 5 GHz frequency range (5.125 to 5.85 GHz) with a maximum 54Mbit/sec. signaling rate. The 5 GHz frequency band is not as crowded as the 2.
Glossary - 2 MC909X User Guide programs support the ANSI terminal mode and often default to this terminal emulation for dial-up connections to online services. ASCII. American Standard Code for Information Interchange. A 7 bit-plus-parity code representing 128 letters, numerals, punctuation marks and control characters. It is a standard data transmission code in the U.S. Association.
Glossary - 3 boot or boot-up. The process a computer goes through when it starts. During boot-up, the computer can run self-diagnostic tests and configure hardware and software. C CAM. (Continuously Aware Mode) Mode in which the adapter is instructed to continually check for network activity. CDMA. (Code Division Multiple Access) A digital cellular technology that uses spread spectrum techniques that separates them through the use of digital frequency codes across the full available spectrum. CDRH.
Glossary - 4 MC909X User Guide Code 93. An industrial symbology compatible with Code 39 but offering a full character ASCII set and a higher coding density than Code 39. Code Length. Number of data characters in a bar code between the start and stop characters, not including those characters. Cold Boot. A cold boot restarts the mobile computer and erases all user stored records and entries. COM port. Communication port; ports are identified by number, e.g., COM1, COM2. Continuous Code.
Glossary - 5 DRAM. Dynamic random access memory. DTE. See Data Terminal Equipment. E EAN. (European Article Number) This European/International version of the UPC provides its own coding format and symbology standards. Element dimensions are specified metrically. EAN is used primarily in retail. EAP. (Extensible Authentication Protocol) A general authentication protocol used to control network access. Many specific authentication methods work within this framework. EAP-PEAP.
Glossary - 6 MC909X User Guide FTP. See File Transfer Protocol. G GPS. (Global Positioning System) A “constellation” of 24 satellites that orbit the Earth at a height of 10,900 miles, making it possible for people using ground receivers to determine their geographic location within 10 to 100 meters. The satellites use simple mathematical calculations to broadcast information that is translated as longitude, latitude and altitude by Earth-based receivers. GPRS.
Glossary - 7 (bar/spaces) within each group determines which characters are encoded. This continuous code type uses no intercharacter spaces. Only numeric (0 to 9) and START/STOP characters may be encoded. IOCTL. Input/Output Control. Intercharacter Gap. The space between two adjacent bar code characters in a discrete code. Interleaved Bar Code. A bar code in which characters are paired together, using bars to represent the first character and the intervening spaces to represent the second.
Glossary - 8 MC909X User Guide L laser scanner. A type of bar code reader that uses a beam of laser light. LASER. (Light Amplification by Stimulated Emission of Radiation) The laser is an intense light source. Light from a laser is all the same frequency, unlike the output of an incandescent bulb. Laser light is typically coherent and has a high energy density. Laser Diode. A gallium-arsenide semiconductor type of laser connected to a power source to generate a laser beam.
Glossary - 9 MS CHAP. (Microsoft Challenge Handshake Authentication Protocol) is the Microsoft version of CHAP and is an extension to RFC 1994. Like the standard version of CHAP, MS-CHAP is used for PPP authentication; in this case, authentication occurs between a PC using Microsoft Windows NT or Microsoft Windows 95 and a Cisco router or access server acting as a network access server (NAS). N Nominal. The exact (or ideal) intended value for a specified parameter.
Glossary - 10 MC909X User Guide Percent Decode. The average probability that a single scan of a bar code would result in a successful decode. In a well-designed bar code scanning system, that probability should approach near 100%. PING. (Packet Internet Groper) An Internet utility used to determine whether a particular IP address is online. It is used to test and debug a network by sending out a packet and waiting for a response. Print Contrast Signal (PCS).
Glossary - 11 Scanner. An electronic device used to scan bar code symbols and produce a digitized pattern that corresponds to the bars and spaces of the symbol. Its three main components are: 1. Light source (laser or photoelectric cell) - illuminates a bar code. 2. Photodetector - registers the difference in reflected light (more light reflected from spaces). 3. Signal conditioning circuit - transforms optical detector output into a digitized bar pattern. Scanning Mode.
Glossary - 12 MC909X User Guide matched up with the IP address to turn part of the host ID address field into a field for subnets. Default is often 255.255.255.0. Substrate. A foundation material on which a substance or image is placed. SVTP. Symbol Virtual Terminal Program. Symbol. A scannable unit that encodes data within the conventions of a certain symbology, usually including start/stop characters, quiet zones, data characters and check characters. Symbol Aspect Ratio.
Glossary - 13 Tolerance. Allowable deviation from the nominal bar or space width. Transmission Control Protocol/Internet Protocol. See TCP/IP. TLS. (Transport Layer Security) TLS is a protocol that ensures privacy between communicating applications and their users on the Internet. When a server and client communicate, TLS ensures that no third party may eavesdrop or tamper with any message. TLS is the successor to the Secure Sockets Layer (SSL). Trivial File Transfer Protocol. See TFTP. TSR.
Glossary - 14 MC909X User Guide WPA2. Wi-Fi Protected Access 2 is an enhanced version of WPA. It uses Advanced Encryption Standard instead of TKIP. WLAN. Wireless local-area networks use radio waves instead of a cable to connect a user device, such as a mobile computer, to a LAN. They provide Ethernet connections over the air and operate under the 802.11 family of specifications developed by the IEEE.
Index IndexIndex Numerics 1-D bar codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-key keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-key keypad (MC909X-S) . . . . . . . . . . . . . . . . . . 2-D bar codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3270 emulator keypad . . . . . . . . . . . . . . . . . . . . . . 33-key numeric keypad (MC909X-K) . . . . . . . . . . . 38-key alpha/shifted numeric keypad (MC909X-S) . 38-key numeric keypad (MC909X-S) . . .
Index - 2 MC909X User Guide charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 check status . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10 installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 removing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 battery charging temperature . . . . . . . . . . . . . . . . . . A-2 battery icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 battery management . . . . . . .
Index - 3 E electrical safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5 electro-static discharge email notification icon . . . . . . . . . . . . . . . . . . . . . . . . 2-4 ESD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2, 6-3 F flash card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5, 6-3 four slot charge only . . . . . . . . . . . . . . . . . . . . . . 1-4, 6-1 four slot charge only cradle . . . . . . . . . . . . . . . . . . . .
Index - 4 MC909X User Guide L laser safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5 laser scanning See data capture . . . . . . . . . . . . . . . . . . . . . . . . 2-50 LED Indicator Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 lithium-ion battery . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 locking the mobile computer . . . . . . . . . . . . . . . . . . . 2-8 M magnetic stripe reader . . . . . . . . . . . . . . . .
Index - 5 Symbol splash window . . . . . . . . . . . . . . . . . . . 1-10 SD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3 secure device card . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3 serial/USB cradle . . . . . . . . . . . . . . . . . . . . . . . . 1-5, 6-1 shelf slide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 short battery adapter . . . . . . . . . . . . . . . . . . . . . . . . . 6-6 SIM card accessories . . . . . . . . . . . .
Index - 6 MC909X User Guide
Tell Us What You Think... We’d like to know what you think about this Manual. Please take a moment to fill out this questionnaire and fax this form to: (631) 738-3318, or mail to: Motorola, Inc. One Symbol Plaza M/S B-4 Holtsville, NY 11742-1300 Attention: Technical Publications Manager IMPORTANT: If you need product support, please call the appropriate customer support number provided. Unfortunately, we cannot provide customer support at the fax number above.
Motorola, Inc. One Symbol Plaza Holtsville, New York 11742-1300 http://www.symbol.
