DP2400e Datasheet

PRODUCT DATA SHEET
MOTOTRBO™ DP2000e SERIES
DIGITAL TWO-WAY RADIOS
TRANSMITTER SPECIFICATIONS
4FSK Digital Modulation 12.5 kHz Data: 7K60F1D and 7K60FXD,
12.5 kHz Voice: 7K60F1E and 7K60FXE,
Combination of 12.5 kHz Voice and Data:
7K60F1W
Digital Protocol ETSI TS 102 361-1, -2, -3
Conducted/Radiated Emissions
(TIA603D)
-36 dBm < 1GHz, -30 dBm > 1GHz
Adjacent Channel Power 60dB (12.5 kHz)
70dB (20
1
/ 25 kHz)
Frequency Stability ± 0.5 ppm
RECEIVER SPECIFICATIONS
Analogue Sensitivity (12dB SINAD) 0.16 uV
Digital Sensitivity (5% BER) 0.14 uV
Intermodulation (TIA603D) 70 dB
Adjacent Channel Selectivity,
(TIA603A)-1T
60 dB (12.5 kHz)
70 dB (20
1
/ 25 kHz)
Adjacent Channel Selectivity,
(TIA603D)-2T
45 dB (12.5 kHz)
70 dB (20
1
/ 25 kHz)
Spurious Rejection (TIA603D) 70 dB
AUDIO SPECIFICATIONS
Digital Vocoder Type AMBE+2™
Audio Response TIA603D
Rated Audio 0.5 W
Audio Distortion at Rated Audio 3%
Hum and Noise -40 dB (12.5 kHz)
-45 dB (20
1
/ 25 kHz)
Conducted Spurious Emissions
(TIA603D)
-57 dBm
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
2
-30 °C to +60 °C
Storage Temperature -40 °C to +85 °C
Electrostatic Discharge IEC 61000-4-2 Level 4
Dust and Water Intrusion IEC 60529 - IP67, 1 m for 30 mins
Packaging Test MIL-STD 810D and E
HAZLOC CERTIFICATION
When properly equipped with Motorola UL-Approved battery, DP2000e Series
radios are UL-Approved to TIA-4950 for use in Hazardous Locations, Division
1, Class I, II, III, Groups C, D, E, F, G; Division 2, Class 1, Groups A, B, C, D, T3C.
Tamb -25°C to +60°C.
MILITARY STANDARDS
MIL-STD 810C MIL-STD 810D MIL-STD 810E MIL-STD 810F MIL-STD 810G
METHOD PROCEDURE METHOD PROCEDURE METHOD PROCEDURE METHOD PROCEDURE METHOD PROCEDURE
Low Pressure 500.1 I 500.2 II 500.3 II 500.4 II 500.5 II
High Temp 501.1 I, II 501.2 I/A1, II/A1 501.3 I/A1, II/A1 501.4 I/Hot, II/Hot 501.5 I/A1, II/A1
Low Temp 502.1 I 502.2 I/C3, II/C1 502.3 I/C3, II/C1 502.4 I/C3, II/C1 502.5 I/C3, II/C1
Temp Shock 503.1 I 503.2 A1/C3 503.3 A1/C3 503.4 I 503.5 I-C
Solar Radiation 505.1 II 505.2 I/Hot-Dry 505.3 I/Hot-Dry 505.4 I/Hot-Dry 505.5 I/A1
Rain 506.1 I, II 506.2 I, II 506.3 I, II 506.4 I, III 506.5 I, III
Humidity 507.1 II 507.2 II/Hot-Humid 507.3 II/Hot-Humid 507.4 - 507.5 II/Hot-Humid
Salt Fog 509.1 I 509.2 I 509.3 I 509.4 - 509.5 -
Dust 510.1 I, II 510.2 I, II 510.3 I, II 510.4 I, II 510.5 I, II
Vibration 514.2 VIII/F, W, XI 514.3 I/10, II/3 514.4 I/10, II/3 514.5 I/24, II/5 514.6 I/24, II/5
Shock 516.2 II 516.3 I, IV 516.4 I, IV 516.5 I, IV 516.6 I, IV
CONNECTION
󰿤 VHF Band, 5 W
󰿤 UHF Band, 4 W
󰿤 300/350 Band, 4 W
󰿤 LKP Models: Mono screen,
limited keypad, 128 channels
󰿤 NKP Models: No screen or
keypad, 16 channels
󰿤 Analogue and Digital
󰿤 Voice and text only
󰿤 Canned Text Messaging
󰿤 Voice Announcement
󰿤 Home Channel Reminder
AUDIO
󰿤 Intelligent Audio
󰿤 IMPRES Audio
󰿥
SINC+ Noise Cancellation
󰿤 Acoustic Feedback Suppressor
󰿤 User-Selectable Audio Profiles
󰿤 Switch Speaker
󰿤 Trill Enhancement
PERSONALISATION
󰿤 Wide range of Accessories
󰿤 4 Programmable Buttons (2 for
NKP model)
MANAGEMENT
󰿤 Radio Management
󰿤 Over-the-Air Programming
󰿥
IMPRES Energy
󰿥
IMPRES Battery Management
󰿥
Over-the-Air Battery
Management
SAFETY
󰿤 Lone Worker
󰿤 Basic Privacy
󰿥
Enhanced Privacy
󰿤 Transmit Interrupt
(decode)
󰿥
Transmit Interrupt
(encode)
󰿤 Emergency
󰿤 Emergency Search Tone
󰿤 Remote Monitor (Decode only)
󰿤 Radio Disable / Enable
(Decode)
󰿤 Waterproof to IP67
󰿤 Rugged to MIL-STD 810
󰿥 TIA4950
HazLoc certification
SYSTEMS
󰿤 Direct Mode (including Dual
Capacity Direct Mode)
󰿤 IP Site Connect (Single and
Multi-Site)
󰿤 Capacity Plus (Single and
Multi-Site)
ALL MODELS
󰿤 Standard feature
󰿥
Optional feature
NOTES
1: 20 kHz channel not available for 300MHz models.
2: Specialized low-temperature battery required for operation below -10 °C
3: Typical battery life, 5/5/90 profile at maximum transmitter power. Actual observed runtimes may vary.