DP2600e User Manual

Preparing Your Radio for Use

English

Attaching the Belt Clip

Align the grooves on the clip

with those on the battery and

press downward until you hear

a click.

To remove the clip, press the

belt clip tab away from the

battery using a key. Then slide

the clip upward and away from

the radio.

Attaching the Universal Connector Cover

(Dust Cover)

The universal connector is located on the antenna side of the

radio. It is used to connect MOTOTRBO accessories to the

radio.

Insert the slanted end of

the cover into the slots

above the universal

connector. Press

downward on the cover to

seat the dust cover

properly on the Universal

Connector.

Secure the dust cover to

the radio by pushing the

latch upwards.

To remove the dust cover,

push the latch downwards.

Lift the cover up and slide

down the dust cover from

the universal connector to

remove it.

Replace the dust cover when the universal connector is not in

use.

LKP_EMEA.book Page 4 Wednesday, March 28, 2012 1:35 PM