DP2600e User Manual

Making and Receiving Calls

English

NOTE: The radio stops receiving the All Call if you switch to a

different channel while receiving the call.

During an All Call, you will not be able to use any

programmed button functions until the call ends.

Receiving and Responding to a Selective Call

A Selective Call is a call from an individual radio to another

individual radio. It is a Private Call on an analog system.

Procedure:

When you receive a Selective Call:

1 The LED blinks green.

2 The Private Call icon appears in the top right corner. The

first text line shows the caller alias or Selective Call or

Alert with Call. Your radio unmutes and the incoming

call sounds through the radio's speaker.

3 To respond. hold the radio vertically 1 to 2 inches (2.5 to 5.0

cm) from your mouth.

4 If the Channel Free Indication feature is enabled, you will

hear a short alert tone the moment the transmitting radio

releases the PTT button, indicating the channel is free for

you to respond.

Press the PTT button to respond to the call.

5 The LED lights up solid green.

6 Wait for the Talk Permit Tone to finish (if enabled) and speak

clearly into the microphone.

7 Release the PTT button to listen.

8 If there is no voice activity for a predetermined period of

time, the call ends.

9 You hear a short tone. The display shows Call Ended.

NOTE: See Making a Selective Call on page 28 for details on

making a Private Call.



LKP_EMEA.book Page 25 Wednesday, March 28, 2012 1:35 PM