DP2600e User Manual

Making and Receiving Calls

English

Making a Radio Call

You can select a channel, subscriber ID, or group by using:

• The Channel Selector Knob

• A programmed One Touch Access button

• A programmable button – This method is for Phone Calls

only.

• The Contacts list (see Contacts Settings on page 38)

NOTE: Your radio must have the Privacy feature enabled on

the channel to send a privacy-enabled transmission.

Only target radios with the same Privacy Key OR the

same Key Value and Key ID as your radio will be able

to unscramble the transmission.

See Privacy on page 60 for more information.

The One Touch Access feature allows you to make a

Group or Private Call to a predefined ID easily. This

feature can be assigned to a short or long

programmable button press.You can ONLY have one

ID assigned to a One Touch Access button. Your

radio can have multiple One Touch Access buttons

programmed.

Making a Call with the Channel Selector Knob

Making a Group Call

To make a call to a group of users, your radio must be

configured as part of that group.

Procedure:

1 Select the channel with the active subscriber alias or ID.

See Selecting a Channel on page 21.

Press the programmed One Touch Access button.

2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from

your mouth.

3 Press the PTT button to make the call. The LED lights up

solid green. The first text line shows the group call icon. The

second text line shows the group call alias,

4 Wait for the Talk Permit Tone to finish (if enabled) and speak

clearly into the microphone.

Wait for the PTT Sidetone to finish (if enabled) and

speak clearly into the microphone.

5 Release the PTT button to listen.When the target radio

responds, the LED blinks green. You see the Group Call

icon, the group alias or ID, and transmitting radio alias or ID

on your display.



LKP_EMEA.book Page 26 Wednesday, March 28, 2012 1:35 PM