DP2600e User Manual

English
54
NOTE: Long press d at any time to return to the Home
screen.
Viewing a Sent Text Message
Procedure:
Press the programmed Text Message button and proceed to
Step 3.
OR
Follow the procedure below.
1 c to access the menu.
2 < or > to Messages and press e to select.
3 < or > to Sent Items and press e to select.
4 < or > to the required message and press e to
select.
A subject line may be shown if the message is from an
e-mail application.
The icon beside each message indicates the status of the
message (see Sent Item Icons on page 18).
Sending a Sent Text Message
You can select one of the following options while viewing a sent
text message:
• Resend
• Forward
• Delete
If the channel type (i.e. conventional digital) is not a match, you
can only edit, forward, or delete a Sent message.Procedure:
1 Press c again while viewing the message.
2 < or > to Resend and press e to select.
3 The display shows transitional mini notice, confirming that
the same message is being sent to the same target radio.
4 If the message is sent, a tone sounds and the display shows
positive mini notice.
OR
If the message is not sent, a low tone sounds and the
display shows negative mini notice.
If the message fails to send, the radio returns you to the Resend
option screen. Press
e to resend the message to the same
subscriber/group alias or ID.
NOTE: Changing the volume, and pressing any button, except
for e, <, or >, returns you to the message.
The radio exits the Resend option screen if you press
the PTT button to initiate a Private or Group Call, or to
respond to a Group Call. The radio also exits the
screen when it receives a text or telemetry message,
an emergency call or alarm, or a call alert.


LKP_EMEA.book Page 54 Wednesday, March 28, 2012 1:35 PM