Home Security System User's Manual

MICOM-2ES/2RS/2T

1. Press MENU to display the Menu screen.

Note

If you see SCAN next to F3, first

enable the ALE functionality using

PROG>RAD>OPTS>ALE.

MOTOROLA

CHAN FREQ ALE BITs

2. Press ALE (F3).

The last active net flashes in the display.

ALE

NET 7

MOTOROLA

3. To use the displayed net, press ENTER.

To select another net:

• Press the UP/DOWN keys until you reach the required number.

• Use the keypad to enter the desired net number.

The new net number blinks, indicating that the

selection has not yet been confirmed.

ALE

NET 1

MOTOROLA

4. Press ENTER to confirm your choice. The radio

then starts scanning the channels in the selected net

(the changing channel number appears to the right

of the net number).

ALE

NET 1 1

MOTOROLA

CALL LQA MON

S ALE Supplement to Owner’s Guide

_________________________________________________________________________________________________

Entering the ALE Mode

To use the ALE mode, first it must be enabled as explained below.

Enabling the ALE Mode

➤ To enter the ALE mode:

ALE and Rx Only or Tx Only Channels

The radio will prevent users from performing calls on Rx only or Tx only channels.

This is true even when operating in the Channel mode: when selecting a Rx Only or

Tx Only channel, the ALE option is disabled (the CALL (F1) key is not displayed

when such a channel is selected).

ALE Programming

ALE supports many features, including:

• Various type of calls

• Up to 20 nets, each with its own set of members and associated frequencies

(channels)