Radio User Manual

ManualsBrandsMotorola ManualsRadioMIP 5000

intelligence ever ywhere

™

MIP 5000 VoIP Radio Console

Quick Installation Guide

Documentation

MIP 5000 VoIP Radio Console Installation CD

MIP 5000 VoIP Radio Console Installation and Configuration Manual

P/N: 6881013Y35

This guide offers a broad overview of the installation procedures.

For more detailed information, consult the installation and

configuration manual.

RO-99-2124

Summary of content (6 pages)

PAGE 1
MIP 5000 VoIP Radio Console Quick Installation Guide intelligence ever y where™ Documentation MIP 5000 VoIP Radio Console Installation CD MIP 5000 VoIP Radio Console Installation and Configuration Manual P/N: 6881013Y35 This guide offers a broad overview of the installation procedures. For more detailed information, consult the installation and configuration manual.
PAGE 2
Typical Configuration MIP 5000 VoIP Operator position Radio Type MTR2000 MIP 5000 VoIP Operator position Cable # 2- or 4-wire leased line MIP 5000 VoIP Operator/CSDM position Tone Gateway Customer-provided Ethernet LAN/WAN RJ45 Local Gateway Radio Type Generic M1225 SM50 SM120 CDM series MaxTrac Cable # DDN6340A DB25 Digital Gateway RJ45 DDN6338A Digital Gateway Radio Type MCS2000 III Consolette W9 CDM1550 Gateway Type Local Gateway Tone Gateway Digital Gateway Order # L3482A L3483A L3484A
PAGE 3
Step 1. Preparation ! 1. Prepare the site before beginning the installation. See Chapter 2, "Site Preparation" in the MIP 5000 VoIP Radio Console Installation and Configuration Manual. Important: Make sure there is a network access port in each location where a MIP 5000 Gateway is to be installed. An additional port is recommended for use by service personnel. 2. If required, install the electronics equipment shelves intended to hold the MIP 5000 Gateway units. 3.
PAGE 4
Step 3. System Configuration 1. Use the CSDM to configure the system. • Select Configuration > System > Parameters and enter a Console Configuration Password Note: If your network spans two or more subnets, increase Multicast Time-to-Live (TTL). • Select Configuration > Console > Parameters to add a Console for each console in the system. • Enter MAC Address and Host Name or IP Address for each console, as recorded on the Discovery Form at Step 1, Task 5.
PAGE 5
Step 5. Console Preparation and Software Installation Note: Repeat each task in this section for each console. 1. Install any required audio devices at each dispatch position (console), such as headsets, speakers, and footswitches. 2. Install the MIP 5000 VoIP Radio Console program on the networked computers identified for this purpose. • • ! Insert the CD-ROM, select Install Console. Depending on Windows security settings, security warnings may appear.
PAGE 6
Discovery Form MAC Address Host Name or IP Address OPR Name/ID CSDM/TFTP Computer MIP 5000 Consoles Computer 1 Computer 2 Computer 3 Computer 4 Computer 5 Computer 6 Computer 7 Computer 8 MIP 5000 Gateways Channel Name/ID Gateway 1 Gateway 2 Gateway 3 Gateway 4 Gateway 5 Gateway 6 Gateway 7 ! Gateway 8 Important: Your network must support multicast addressing. (Photocopy this form as required.) How to get MAC address and IP info for console computers 1. 2. 3. 4.