Laptop User Manual

IV. Enabling the RF Pass-Through Option Using MLAA and MLUA
1. Launch the ML Administrator Application.
2. Go to the RF Pass-Through options available in MLAA (highlighted in Figure 1, below).
3. Change the RF Pass-Through User Control from [Disable] to [Enable] (Figures 2 & 3).
4. Select [Write to EC] to change the setting (Figure 4), a message will be shown after the setting
is updated to System EC (Figure 5).
1 2
3 4
5
ML910 R1.0 RF Pass-through Upgrade Procedure, Version A 19