user manual

X
Home Print Exit
Introduction Before You Begin Installation Configuration Troubleshooting Legal
5
Before You Begin
Before you begin the installation, check that you have:
You need to purchase a 75-ohm coaxial cable with F-type connectors for connecting
your SB4101 to the nearest cable outlet. If you have a TV attached to the cable outlet,
you may need a 5-900 MHz splitter to use both the TV and the SB4101. Both the coaxial
cable and the RF splitter are readily available at consumer electronic stores.
Item Description
Power cord Required for connecting the SB4101 to the AC
electrical outlet.
One 10/100Base-T
shielded Ethernet cable
Required for connecting to the Ethernet port.
One USB cable Required for connecting to the USB port.
SB4101 User Guide
CD-ROM
Contains the User Guide and USB drivers necessary
for connecting to USB port.
Power cord
10/100Base-T
shielded
Ethernet cable
USB cable
SB4101
User Guide
CD-ROM