user manual

11
X
Home Print Exit
Introduction Before You Begin Installation Configuration Troubleshooting Legal
To turn on your SB4101, simply plug it in. It is
not necessary to unplug it when not in use.
Cabling and Startup for a Single User
5 Check that the lights on the front of the SB4101 cycle through the following
sequence:
n Power flashes during a self-test. When the self-test is successfully complete, the
light is solid green.
n Receive flashes while the SB4101 scans for the receive channel. When the
receive channel is locked, the light is solid green.
n Send flashes while the SB4101 scans for the send channel. When the send
channel is locked, the light is solid green.
n Online flashes while the SB4101 is obtaining configuration information. When
the configuration information is obtained, the light is solid green.