User`s manual

Network Configuration
5-64
Dialog box parameters
Use the parameters in the order specified below. Normally you’ll only use the File Name
parameter.
Save in
If the currently displayed directory is not the correct one, double-click the drive letter at the
right of the Save in Directories list and locate the directory. To access sub-directories, double-
click parent directories.
File Name
Type the name of the configuration file you want to create, and click OK. The ToolBox
automatically adds the .scf extension. If you specify the name of a configuration file that
appears on the list, the ToolBox issues a message asking you whether you want to overwrite
the existing file. Select Yes only if you want to replace the existing file with the new one.
Save as Type
This box shows the type (extension) of the files currently displayed in the File Name list. If the
displayed file type “filter” is not .scf, open the drop-down list and select the .scf type.
Print
The Print command (Network Configuration, File menu) prints the contents of the displayed
table to a printer, as defined in Print Setup.
Page Setup
The PageSetup command (Network Configuration, File menu) enables the user to define the
page setup and printer to be used.
Exit
The Exit command (Network Configuration, File menu) exits the network configuration
utility.