User`s manual

5-139
Stop Communication Driver
The Stop Communication Driver is used when a session password is changed. This
utility
allows you to sever the connection to the current unit and connect to another
IP Gateway, or work off-line. Before stopping communications, close all Toolbox tools
and then double-click the Stop Communication Driver icon in the Toolbox program folder
(shown below).
If you try to stop the communication driver while a communication session is in progress, a
message warns you that a logical channel is currently open.
If you chose to continue (stop the driver), the results of the current communication cannot
be predicted. It is, therefore, advisable to finish the current task and then to stop the driver.
If all applications were closed before activating the utility, the following dialog box is
displayed.
If no drivers were active before stopping the communication driver, the following message
is displayed.