User`s manual

Error Messages
C-153
Error #823: Userrom Plc module, Function %%
Get_coldef_tab Failed !
May indicate system software problem. Consult product group.
Error #824: Userrom Plc module, Function %%
Data Type Format Error In Protocol !
Communication format error. Consult product group.
Error #825: Userrom Plc module, Function %%
Data Type Mismatch !
Data type error when accessing a column via PLC communication. Data type
mismatch.
Error #826: Userrom Plc module, Function %%
Number of elements must be greater from 0
May indicate system software problem. Consult product group.
Error #827: Userrom Plc module, Function %%
First Y – coord. out of range !
This message indicates that the SCADA accesses via PLC communication a
row which is out the range of defined rows.
Error #828: Userrom Plc module, Function %%
Last Y – coord. out of range !
This message indicates that the SCADA accesses via PLC communication a
row which is out the range of defined rows.
Error #829: Userrom Plc module, Function %%
Unpack of f_buf failed !
May indicate system software problem. Consult product group.
Error #830: Userrom Plc module, Function %%
Scan failed. No rows in column !
May indicate system software problem. Consult product group.
Error #831: Userrom Plc module, Function %%
Cannot allocate f-buf !
Empty heap. Consult product group.
Error #832: Userrom Plc module, Function %%
Reply Format Error !
Communication format error in the reply frame. May indicate system software
problem. Consult product group.