User manual

Connect, share, pay & sync
Connect, share, pay & sync
Connect to other devices, share files with friends, pay with your phone, and sync to the
cloud.
Connect with Wi-Fi
Turn Wi-Fi power on/o
Find it: Swipe up > Settings > Network & internet, then tap the switch to turn it
on
When Wi-Fi is on, your phone automatically reconnects to available networks it has
used before.
Note: You can also turn Wi-Fi on and o in Quick settings.
Connect to networks
To find networks in your range:
1 Swipe up > Settings > Network & internet > Wi-Fi.
2 With Wi-Fi turned on, tap a found network to connect to it. When connected, you’ll
see
in the status bar.
Note: If you see a question mark in the Wi-Fi status indicator , swipe the status bar
down, tap the network, and enter the network’s password.
Wi-Fi hotspot
Your can make your phone a Wi-Fi hotspot to provide portable, convenient Internet
access to other Wi-Fi enabled devices. Your phone turns o Wi-Fi and uses the mobile
network for Internet access. This feature may require an additional subscription service
from your service provider.
Find it: Swipe up
> Settings > Network & internet > Hotspot & tethering > Wi-Fi
hotspot
Note: These steps may vary depending on your network.
To set up security:
» Hotspot name: Enter a unique name for your hotspot.
» Hide my device: Hide your hotspot from other devices.
» Security: Select the type of security you want: None or WPA2-Personal. For WPA2-
Personal, enter a unique password (8 characters) that others will need to access your
Wi-Fi hotspot.
Note: To change your hotspot password or turn o hotspot automatically, tap
Advanced.
Connect with Bluetooth wireless
Turn Bluetooth power on
To turn Bluetooth on, swipe the status bar down and touch . Touch and hold it to
open Bluetooth settings.
Note: Your phone automatically turns on Bluetooth power when you connect to a
paired device.
Tip: To extend battery life or stop connections, turn Bluetooth o when you’re not using
it.
Connect devices
The first time you connect a Bluetooth device, follow these steps:
1 Make sure the device you are pairing with is in discoverable mode (for details, refer to
the guide that came with the device).
2 Swipe up > Settings > Connected devices > Pair new device.
3 With Bluetooth turned on, tap a found device to connect it (if necessary, tap Pair or
enter a passkey like 0000). You can tap
to rename the device and choose what
the device will be used for.
When the device connects, the Bluetooth connected indicator
appears at the top
of the screen.
To automatically disconnect or reconnect a device, just turn the device o or on.
Note: Using a mobile device or accessory while driving may cause distraction and may
be illegal. Always obey the laws and drive safely.
Share files
» Photos or videos: Open the photo or video, then tap > Bluetooth.