User`s guide

69
connections
Now you can use your device as a modem to connect
to a service provider or network.
modem-link with a cable
Note: Do not connect your data cable to your device
and computer until these steps tell you to.
To use a USB cable with your device to connect with
modem-link to a network, first you need to install
networking drivers onto your computer.
On your computer:
1
Place the provided Getting Started Disc into the
CD Drive on your computer. Your computer
automatically launches the Getting Started Disc.
Note: If you do not have the Getting Started Disc,
or want the latest version of the device and
computer drivers, go to
www.motorola.com/support/Q9 .
2 In the Getting Started Disc application, go to the
Additional Tools screen and select the
Dial-Up
Networking Software
.
3 Follow the prompts as directed to install the
drivers onto your computer.
On your device:
Now, you need to enable modem-link on your device
and install device drivers:
4 On your device, press Start > System Tools > Settings
>
Connections > USB Device Type > Modem , and press Done .
5 Using the USB data cable, connect the device to
your PC.
The driver is installed on your computer and ready
for setting up a network connection.